Описание товара
Подробности
Система DMPS-300-C обеспечивает распределение аналоговых и цифровых аудио- и видеосигналов высокой четкости, оснащена встроенным автоматическим микрофонным микшером, подсистемой матричной коммутации, усилителем акустических систем, процессором цифровой обработки звука и полнофункциональной системой управления Crestron и поддерживает подключение к системам DM 8G+™.
- Подавление акустической обратной связи во всем частотном диапазоне для всех микрофонных входов
- High-Definition мультимедиа коммутатор, микрофонный микшер, аудио-DSP, усилитель и система управления
- Встроенный DigitalMedia™ коммутатор с поддержкой технологии DM 8G+™
- Поддержка спецификации HDBaseT™
- Матричная коммутация сигнала от 7 источников для четырех дисплеев
- Поддержка HDMI, DVI, DisplayPort Multimode и SPDIF цифровых источников
- Поддержка аналоговых источников RGB, composite, S-Video, component и стерео-аудио
- Поддержка функции авто-определения и авто-переключения для всех аудио и видео источников
- Встроенный шести-канальный микрофонный микшер с DSP
- Поддерживает микширование аудио и коммутацию на 7 разных выходов
- Поддерживает функцию следования аудио за коммутируемым видео для всех входов
- Поддержка извлечения и добавление сигнала HDMI аудио
- Обеспечивает 3 аналоговых стерео выхода с независимыми DSP
- Встроенный усилитель 40 Ватт, с возможностью выбора режима 8 Ohm стерео или 70/100 Volt моно
- Сигналы Multi-channel PCM, Dolby® и DTS® аудио могут коммутироваться на выходы HDMI и DM 8G+
- DigitalMedia 8G+™ позволяет использвать кабель CAT5e для подключения удаленных источников сигнала и дисплеев
- Доставляет питание по DM для устройств с поддержкой PoDM
- Технология QuickSwitch HD® управлет ключами HDCP
- Автоматическое управление форматом AV сигнала через EDID
- Масштабатор обеспечивает дискретную оптимизацию картинки для каждого дисплея
- Встроенный Ethernet коммутатор
- Система управления 2-Series обеспечивает полный контроль решением
- Поддержка Crestron® интерактивных панелей, кнопочных панелей и беспроводных пультов ДУ
- Встроенный e-Control® Web server
- Поддержка пульта управления XPanel Web-based
- Поддержка управления через мобильные приложения Crestron Mobile® для iPhone®, iPad® и Android™
- Совместимость с системами управления Fusion RV™ и SNMP
- Обеспечение простой настройки и диагностики на фронтальной панели управления или через софт
- Встроенный универсальный блок питания
- Возможен монтаж в стойку 19", занимает 3U
Дополнительная информация
Operating System | ||
Crestron® 2-Series; real-time, preemptive, multi-threaded/multitasking kernel; FAT32 file system with long names | ||
Memory | ||
SDRAM | 32 MB | |
NVRAM | 256 KB | |
Flash | 16 MB | |
Communications | ||
Ethernet | 10/100/1000 Mpbs; auto-switching; auto-negotiating; auto-discovery; full/half duplex; TCP/IP; UDP/IP; CIP; DHCP; Private Network Mode; SSL; SNMP; IPv4; RSTP; SMTP e-mail client; Web Server; installer setup via Crestron Toolbox™; supports all e-Control®, Crestron Mobile®,Fusion RV™ and RoomView® applications | |
Cresnet | Cresnet® master mode | |
DigitalMedia | DM 8G+, HDCP, EDID, CEC, PoDM | |
HDMI | HDMI, HDCP, EDID, CEC | |
USB | USB service port for computer console | |
RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking | |
IR/Serial | 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 9600 baud; supports CNXRMIRD IR Receiver[4] | |
Ethernet Switch | ||
Provides (1) onboard 10/100/1000Base-T Gigabit Ethernet port, (4) remote 10Base-T/100Base-TX Ethernet ports via select outboard DM devices, plus internal Ethernet ports for the control processor, switcher, and audio DSP | ||
Video | ||
Switcher | Auto-detecting multi-format digital/analog source inputs, 7x4 matrix switcher, HDMI and DM 8G+ outputs, QuickSwitch HD® technology | |
Input Signal Types | HDMI (Inputs 1-5), RGB[5] (Inputs 3-5), composite/S-Video/component (Input 5), DM 8G+ (Inputs 6 & 7) | |
Output Signal Types | HDMI (Outputs 1 & 2), DM 8G+ (Outputs 3 & 4) | |
Formats | HDMI w/Deep Color & 3D[6], DVI[1], DisplayPort Multimode[1], HDCP content protection support, HD up to 1080i/1080p, computer up to UXGA/WUXGA, RGBHV, RGBS, RGSB, YPbPr, Y/C, NTSC, PAL | |
Input Resolutions, HDMI, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, HDMI, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, RGB | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz | |
Input Resolutions, Component | 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 | |
Input Resolutions, Composite and S-Video | 480i, 576i | |
Output Resolutions | Matched to inputs | |
Analog-To-Digital Conversion | 10-bit 165 MHz per each of 3 channels | |
Audio | ||
Switcher/Mixer | 6-channel gated mic mixer w/DSP, auto-detecting multi-format digital/analog source inputs, DigitalMedia 8G+ inputs, 7x7 stereo source switcher, 7x4 multi-channel source switcher, analog and HDMI outputs, DM 8G+ outputs, independent 6-ch mic + source mixer per output, independent stereo DSP per analog output, integrated power amplifier, digital audio pass-through mode | |
| ||
Input Signal Types | Mono analog mic or line level | |
Analog-To-Digital Conversion | 24-bit 48 kHz | |
Phantom Power | Enable/Disable per channel | |
Gain | +12 to +57 dB (mic level), adjustable from 0% to 100%, plus mute | |
Delay | 0.0 to 85.3 ms | |
EQ Center Frequencies | 160, 500, 1.2k, 3k Hz | |
EQ Gain | ±12.0 dB per band | |
Gating Level (Threshold) | -80 to 0 dB | |
Gating Depth (Attenuation) | -80 to 0 dB | |
Gating Attack | 1 to 250 ms | |
Gating Decay (Release) | 1 to 1000 ms | |
Compression Level (Threshold) | -80 to 0 dB | |
Compression Ratio | 1:1 to 10:1 | |
Compression Attack | 1 to 250 ms | |
Compression Release | 1 to 1000 ms | |
Compression Curve | Hard or soft knee | |
Limiting Level (Threshold) | -80 to 0 dB | |
Limiting Attack | 1 to 250 ms | |
Limiting Release | 1 to 1000 ms | |
Limiting Curve | Hard or soft knee | |
| ||
Input Signal Types | HDMI or DisplayPort Multimode[1] (Inputs 1-5), analog 2-channel (Inputs 1-5), S/PDIF (Input 5), DM 8G+ (Inputs 6 & 7) | |
Formats, Analog | Stereo 2-Channel | |
Formats, HDMI & DM | Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM | |
Formats, SPDIF | 2ch PCM | |
Analog-To-Digital Conversion | 24-bit 48 kHz | |
Analog Input Compensation | ±10.0 dB | |
| ||
Output Signal Type/Format | Stereo 2-Channel | |
Digital-To-Analog Conversion | 24-bit 48 kHz | |
Volume | -80 to +20 dB, adjustable from 0% to 100%, plus mute | |
Bass | ±12.0 dB | |
Treble | ±12.0 dB | |
Mic Mix Gain (x6) | -80.0 to 0.0 dB, plus mute | |
Mic Balance (x6) | 0dB to -80dB, either channel from center | |
Source Mix Gain | -80.0 to 0.0 dB, separately adjustable for Left and Right, plus mute | |
Mixer Presets | 1 thru 5 | |
Equalization | 10-band graphic + 2-band parametric | |
GEQ Center Frequencies | 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz | |
GEQ Gain | ±12.0 dB per band | |
GEQ Presets | 1 thru 10 | |
PEQ Center Frequencies | 5 to 24000 Hz per band | |
PEQ Gain | -36.0 to +24.0 dB per band | |
PEQ Bandwidth | 0.02 to 3.50 octaves per band | |
PEQ Types | Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch | |
Delay | 0.0 to 85.3 ms | |
Frequency Response | 20Hz to 20kHz ±0.5 dB (digital source); 20Hz to 20kHz ±0.5 dB (analog line source); 20Hz to 20kHz ±0.7 dB (microphone source) | |
S/N Ratio | >108 dB (digital source), 1 kHz, A-weighted; >103 dB (analog line source), 1 kHz, A-weighted | |
THD+N | <0.002% (digital source), 20 Hz to 20 kHz; <0.005% (analog line source), 20 Hz to 20 kHz; <0.05% (microphone source), 20 Hz to 20 kHz | |
Stereo Separation | >108 dB (digital source); >103 dB (analog source) | |
Channel Separation | >103 dB | |
| ||
Output Signal Types | HDMI (Outputs 1 & 2), DM 8G+ (Outputs 3 & 4) | |
Formats | Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, up to 8ch PCM | |
Volume | -80 to +20 dB, adjustable from 0% to 100%, plus mute[7] | |
Mic Mix Gain (x6) | -80.0 to 0.0 dB, plus mute[7] | |
Mic Balance (x6) | 0dB to -80dB, either channel from center[7] | |
Source Mix Gain | -80.0 to 0.0 dB, separately adjustable for Left and Right, plus mute[7] | |
Frequency Response | 20Hz to 20kHz ±0.5 dB (digital source); 20Hz to 20kHz ±0.5 dB (analog line source); 20Hz to 20kHz ±0.7 dB (microphone source) | |
S/N Ratio | >108 dB (digital source), 1kHz, A-weighted; >103 dB (analog line source), 1kHz, A-weighted | |
THD+N | <0.002% (digital source), 20 Hz to 20 kHz; <0.005% (analog line source), 20 Hz to 20 kHz; <0.05% (microphone source), 20 Hz to 20 kHz | |
Stereo Separation | >108 dB (digital source); >103 dB (analog source) | |
Channel Separation | >108 dB (digital source); >103 dB (analog source) | |
| ||
Output Power, 4/8 Ω | 20 Watts RMS per channel at 8 Ohms, 4 Ohms tolerant | |
Output Power, 70/100V | 40 Watts RMS | |
Frequency Response | 20 Hz to 20 kHz ±1 dB @ 20 Watts into 8 Ohms; 100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts | |
S/N Ratio | 98 dB @ 20 Watts into 8 Ohms, 1 kHz, A-weighted; 96 dB @ 20 Watts in 4 Ohms, 1 kHz, A-weighted | |
THD+N | <0.1% (1 kHz), <0.7% (20 Hz to 20 kHz), @ 20 Watts into 4 or 8 Ohms | |
Stereo Separation | >65 dB @ 20 Watts, 1 kHz | |
Connectors – Audio/Video Inputs | ||
HDMI INPUT 1 – 5 | (5) 19-pin Type A HDMI female, digital video/audio inputs; Signal Types: HDMI, DVI, or DisplayPort Multimode[1,6] | |
RGB INPUT 3 – 5 | (3) DB15HD female, analog RGB/video inputs; Signal Types: RGBHV, component, S-Video, or composite[5]; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL; Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms nominal; Sync Detection: RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 2.2k Ohms; Note: RGB Inputs 3-5 and HDMI Inputs 3-5 are mutually exclusive; HDMI overrides RGB when using the auto-switching feature | |
Y, PB/Y, PR/C/COMP INPUT 5 | (3) BNC female comprising (1) auto-sensing multi-format analog video input; Signal Types: Component, S-Video, or composite; Formats: YPbPr, Y/C, NTSC or PAL; Input Level: 1 Vp-p nominal; Input Impedance: 75 Ohms nominal; Note: Video Input 5, RGB Input 5, and HDMI Input 5 are mutually exclusive; HDMI and RGB override Video when using the auto-switching feature | |
SPDIF INPUT 5 | (1) RCA female, S/PDIF coaxial digital audio input; Input Impedance: 75 Ohms; Note: SPDIF Input 5 and HDMI Input 5 are mutually exclusive; HDMI overrides SPDIF when using the auto-switching feature | |
AUD IN 1 – 5 | (5) 5-pin 3.5mm detachable terminal blocks; Balanced/unbalanced stereo line-level analog audio inputs; Input Impedance: 24k Ohms balanced/unbalanced; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced; Note: Analog Audio Inputs 1-5, SPDIF Input 5, and HDMI Inputs 1-5 are mutually exclusive; HDMI and SPDIF override Analog Audio when using the auto-switching feature | |
DM INPUT 6 – 7 | (2) 8-pin RJ45 female, shielded; DM 8G+ inputs, capable of supplying power over DM[3]; Connect to DM 8G+ outputs of DM transmitters or other DM devices via CAT5e or Crestron DM-CBL-8G cable[2] | |
MC1/LN1 – MC6/LN6 | (6) 5-pin 3.5mm detachable terminal blocks; Comprises (6) balanced microphone/line audio inputs; Balanced Mic Input Level: -57 to -12 dBV, 240 mVrms maximum; Balanced Line Input Level: -28 to +11 dBV, 3.7 Vrms maximum; Unbalanced Line Input Level: -34 to +5 dBV, 1.85 Vrms maximum; Mic Input Impedance: 3.9k Ohms, accepts 60 to 600 Ohm source; Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced; Phantom Power: 48 Volts DC, software enabled/disabled per channel | |
Connectors – Audio/Video Outputs | ||
SPEAKER OUTPUT 4Ω/8Ω L – R | (2) 2-pin 7.62mm 15A detachable terminal blocks; 4-8 Ohm stereo speaker-level audio output; Wire Size: Terminals accept up to 14 AWG; Output Power: 20W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant | |
SPEAKER OUTPUT 70/100V | (1) 2-pin 7.62mm 15A detachable terminal block; Transformer-isolated 70 or 100 Volt mono speaker-level audio output; Wire Size: Terminals accept up to 14 AWG; Output Power: 40W RMS mono at 70 or 100 Volts; Note: 4Ω/8Ω and 70/100V outputs are mutually exclusive | |
PROG OUT | (1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced | |
AUX OUT 1 – 2 | (2) 5-pin 3.5mm detachable terminal blocks; Balanced/unbalanced stereo line-level audio outputs; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced | |
HDMI OUTPUT 1 – 2 | (2) 19-pin Type A HDMI female, digital video/audio outputs; Signal Types: HDMI, DVI[1] | |
DM OUTPUT 3 – 4 | (2) 8-pin RJ45 female, shielded; DM 8G+ outputs, capable of supplying power over DM[3]; Connect to DM 8G+ inputs of DM receivers/room controllers or other DM devices via CAT5e or Crestron DM-CBL-8G cable[2] | |
Connectors - Control & Power | ||
IR/SERIAL OUT 1 – 4 | (4) 2-pin 3.5mm detachable terminal blocks; IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
IR IN | (1) 3-pin 3.5mm detachable terminal block For connection of the CNXRMIRD IR Receiver[4]; Allows control from IR wireless remotes using RC-5 command set | |
INPUT 1 – 4 | (1) 5-pin 3.5mm detachable terminal block; Comprises (4) programmable digital inputs; Input Voltage Range: 0 to 24 Volts DC, referenced to GND; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band; Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts; Pull-up Resistor: 2.2k Ohms per input | |
RELAY 1 – 4 | (1) 8-pin 3.5mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts | |
COM A – B | (2) DB9 male, bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support | |
NET | (4) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, paralleled; Available Cresnet Power: 30 Watts | |
SERVICE | (1) USB Type B female, for factory use only | |
PoDM 48VDC IN | (1) 4-pin snap & lock power jack; 48 Volt DC power input for PoDM power pack[3]; Enables Power over DM | |
100-240V~4.0A 50/60Hz | (1) IEC C14 male chassis plug, main power input; Mates with removable power cord, included | |
G | (1) 6-32 screw, chassis ground lug | |
LAN | (1) 8-wire RJ45 female, 10/100/1000Base-T Ethernet port | |
COMPUTER (front) | (1) USB Type B female; USB computer console port (cable included) | |
LCD Display | ||
Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line; Displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information | ||
Controls & Indicators | ||
NET | (1) yellow LED, indicates Cresnet bus activity | |
LAN | (1) yellow LED, indicates Ethernet activity | |
HW-R | (1) recessed miniature pushbutton for hardware reset, reboots the control system | |
SW-R | (1) recessed miniature pushbutton for software reset, restarts the SIMPL program | |
POWER | (1) pushbutton and green LED, programmable for system power control | |
SOFTKEYS | (4) pushbuttons for activation of LCD driven functions and passcode entry | |
MENU | (1) pushbutton, steps menu back one level | |
Λ, V | (2) pushbuttons, scroll up or down through menu and adjust menu parameters | |
ENTER | (1) pushbutton, executes highlighted menu or value | |
VOLUME | (1) continuous turn rotary encoder, adjusts menu parameters, defaults to Program audio volume | |
MUTE | (1) pushbutton and red LED, mutes the Program audio output | |
ROUTE | (1) pushbutton and red LED, selects ROUTE mode to allow routing changes | |
VIEW | (1) pushbutton and red LED, selects VIEW mode to view current routing | |
INFO | (1) pushbutton and red LED, selects INFO mode to view AV and device info | |
INPUTS 1 – 7 | (7) pushbuttons and red LEDs, select input to be routed | |
OUTPUTS 1 – 4, PROG, AUX 1 – 2 | (7) pushbuttons and red LEDs, select output destination(s) | |
SPEAKER OUTPUTS | (1) 3-position slide switch, selects the amplifier output configuration | |
DM INPUT 6 – 7 (rear) | (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each respective port | |
DM INPUT 6 – 7 PoDM (rear) | (2) green LEDs, indicate upstream device is drawing power over DM for each respective port | |
DM OUTPUT 3 – 4 (rear) | (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each respective port | |
DM OUTPUT 3 – 4 PoDM (rear) | (2) green LEDs, indicate downstream device is drawing power over DM for each respective port | |
LAN (rear) | (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status | |
Power Requirements | ||
Main Power | 4 Amps @ 100-240 Volts AC, 50/60 Hz | |
Available Cresnet Power | 30 Watts | |
Power over DM | 1.875 Amp @ 48 Volts (100-240 Volts AC, 50/60 Hz power pack, model PW-4818DU sold separately) | |
Environmental | ||
Temperature | 41° to 104°F (5° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 277 BTU/hr | |
Enclosure | ||
Chassis | Metal, black finish, fan-cooled, vented sides | |
Faceplate | Metal, black finish with polycarbonate label overlay | |
Mounting | Freestanding or 3U 19-inch rack-mountable (adhesive feet and rack ears included) | |
Dimensions | ||
Height | 5.20 in (133 mm) without feet | |
Width | 17.03 in (433 mm); 19.00 in (483 mm) with rack ears | |
Depth | 16.31 in (415 mm) | |
Weight | ||
22 lb (9.9 kg) |