![Crestron DigitalMedia™ Presentation System 300]()
Описание товара
Подробности
Модель DMPS-100-C предназначены для создания недорогих высокопроизводительных систем небольшого размера.
- Один видеовыход с параллельными портами HDMI® и DM 8G+™
- Поддержка стандарта HDBaseT™
- Два стереофонических аналоговых выхода с независимой цифро вой обработкой сигнала для каждого выхода
- Встроенный 40-ваттный усилитель с возможностью выбора режи ма: 8 Ом стерео или 70/100 В моно
- На один вход HDMI и аналоговый аудиовход меньше, чем в DMPS300-C
- Двухканальный микрофонный микшер со шлюзом и цифровой обработкой сигнала
- Встроенная система управления 2-Series
- Возможность установки в стойку. (Высота 3U.)
Дополнительная информация
| Operating System | ||
| Crestron® 2-Series; real-time, preemptive, multi-threaded/multitasking kernel; FAT32 file system with long names; preloaded auto-configuration software | ||
| Memory | ||
| SDRAM | 32 MB | |
| NVRAM | 256 KB | |
| Flash | 16 MB | |
| Communications | ||
| Ethernet | 10/100/1000 Mpbs; auto-switching; auto-negotiating; auto-discovery; full/half duplex; TCP/IP; UDP/IP; CIP; DHCP; Private Network Mode; SSL; SNMP; IPv4; RSTP; SMTP e-mail client; Web Server; installer setup via Crestron Toolbox™ | |
| Cresnet | Cresnet® master mode | |
| DigitalMedia | DM 8G+™, HDCP, EDID, CEC, PoDM, HDBaseT® compliant | |
| HDMI | HDMI®, HDCP, EDID, CEC | |
| USB | USB service port for computer console, USB HID signal routing over DM | |
| RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking | |
| IR/Serial | 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver[1] | |
| Ethernet Switch | ||
| 5-port switch with Private Network Mode; provides (1) rear panel 10/100/1000Base-T Gigabit Ethernet port and (4) internal 10Base-T/100Base-TX Ethernet ports for the control processor, switcher, audio DSP, and DM port | ||
| Video | ||
| Switcher | Auto-detecting multi-format digital/analog source inputs, 4x1 switcher, HDMI and DM 8G+ outputs, QuickSwitch HD® technology | |
| Input Signal Types | HDMI (Inputs 1-4), RGB[5] (Inputs 2-4), composite/S-Video/component (Input 4) | |
| Output Signal Types | HDMI, DM 8G+ and HDBaseT | |
| Formats | HDMI w/Deep Color & 3D[6], DVI[2], DisplayPort Multimode[2], HDCP content protection support, HD up to 1080i/1080p, computer up to UXGA/WUXGA, RGBHV, RGBS, RGSB, YPbPr, Y/C, NTSC, PAL | |
| Input Resolutions, HDMI, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
| Input Resolutions, HDMI, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
| Input Resolutions, RGB | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz | |
| Input Resolutions, Component | 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 | |
| Input Resolutions, Composite and S-Video | 480i, 576i | |
| Output Resolutions | Matched to inputs | |
| Analog-To-Digital Conversion | 10-bit 165 MHz per each of 3 channels | |
| RGB Source Image Adjustments | Brightness: 0% to 50%; Contrast: -50% to +50%; Fine Phase: -16 to *15; X Position: -100 to +100; Y Position: -10 to +10; RGB Gains: -50 to +50, separately adjustable for Red, Green, and Blue | |
| YPbPr, Y/C, or Composite Source Image Adjustments | Brightness: 0% to 50%; Contrast: -50% to +50%; Saturation: -50% to +50%; Hue: -50% to +50% | |
| Audio | ||
| Switcher/Mixer | 2-channel gated mic mixer w/DSP, auto-detecting multi-format digital/analog source inputs, 4x3 stereo source switcher, 4x1 multi-channel source switcher, analog and HDMI outputs, DM 8G+ output (HDBaseT compatible), independent 2-ch mic + source mixer per output, independent stereo DSP per analog output, integrated power amplifier, digital audio pass-through mode | |
| ||
| Input Signal Types | Mono analog mic or line level | |
| Analog-To-Digital Conversion | 24-bit 48 kHz | |
| Phantom Power | Enable/Disable per channel | |
| Gain | 0 to +60 dB Gain adjustment, plus Mute | |
| Delay | 0.0 to 85.3 ms | |
| EQ Center Frequencies | 160, 500, 1.2k, 3k Hz | |
| EQ Gain | ±12.0 dB per band | |
| Gating Level (Threshold) | -80 to 0 dB | |
| Gating Depth (Attenuation) | -80 to 0 dB | |
| Gating Attack | 1 to 250 ms | |
| Gating Decay (Release) | 1 to 1000 ms | |
| Compression Level (Threshold) | -80 to 0 dB | |
| Compression Ratio | 1:1 to 10:1 | |
| Compression Attack | 1 to 250 ms | |
| Compression Release | 1 to 1000 ms | |
| Compression Curve | Hard or soft knee | |
| Limiting Level (Threshold) | -80 to 0 dB | |
| Limiting Attack | 1 to 250 ms | |
| Limiting Release | 1 to 1000 ms | |
| Limiting Curve | Hard or soft knee | |
| ||
| Input Signal Types | HDMI or DisplayPort Multimode[2] (Inputs 1-4), analog 2-channel (Inputs 1-4), S/PDIF (Input 4) | |
| Formats, Analog | Stereo 2-Channel | |
| Formats, HDMI & DM | Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM | |
| Formats, SPDIF | 2ch PCM | |
| Analog-To-Digital Conversion | 24-bit 48 kHz | |
| Input Compensation | ±10.0 dB | |
| ||
| Output Signal Type/Format | Stereo 2-Channel | |
| Digital-To-Analog Conversion | 24-bit 48 kHz | |
| Mic 1 – 2 | -80 to +10 dB Level adjustment range, plus Mute and Pan | |
| Mics Master | -80 to +10 dB Level adjustment range, plus Mute | |
| Left/Right (Source) | -80 to +10 dB Level adjustment range, separately adjustable for Left and Right, plus Mute | |
| Master Volume | -80 to +10 dB Level adjustment range, plus Mute | |
| Mixer Presets | 1 thru 5 | |
| Bass | ±12.0 dB | |
| Treble | ±12.0 dB | |
| Equalization | 10-band graphic + 2-band parametric | |
| GEQ Center Frequencies | 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz | |
| GEQ Gain | ±12.0 dB per band | |
| GEQ Presets | 1 thru 10 | |
| PEQ Center Frequencies | 5 to 24000 Hz per band | |
| PEQ Gain | -36.0 to +24.0 dB per band | |
| PEQ Bandwidth | 0.02 to 3.50 octaves per band | |
| PEQ Types | Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch | |
| PEQ Presets | 1 thru 5 | |
| Delay | 0.0 to 85.3 ms | |
| Frequency Response | 20Hz to 20kHz ±0.5 dB (digital source); 20Hz to 20kHz ±0.5 dB (analog line source); 20Hz to 20kHz ±0.7 dB (microphone source) | |
| S/N Ratio | >108 dB (digital source), 1 kHz, A-weighted; >103 dB (analog line source), 1 kHz, A-weighted | |
| THD+N | <0.002% (digital source), 20 Hz to 20 kHz; <0.005% (analog line source), 20 Hz to 20 kHz; <0.05% (microphone source), 20 Hz to 20 kHz | |
| Stereo Separation | >108 dB (digital source); >103 dB (analog source) | |
| Channel Separation | >103 dB | |
| ||
| Output Signal Types | HDMI, DM 8G+ and HDBaseT | |
| Formats | Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, up to 8ch PCM | |
| Mic 1 – 2 | -80 to +10 dB Level adjustment range, plus Mute and Pan[7] | |
| Mics Master | -80 to +10 dB Level adjustment range, plus Mute[7] | |
| Left/Right (Source) | -80 to +10 dB Level adjustment range, separately adjustable for Left and Right, plus Mute[7] | |
| Master Volume | -80 to +10 dB Level adjustment range, plus Mute[7] | |
| Mixer Presets | 1 thru 5 | |
| Frequency Response | 20Hz to 20kHz ±0.5 dB (digital source); 20Hz to 20kHz ±0.5 dB (analog line source); 20Hz to 20kHz ±0.7 dB (microphone source) | |
| S/N Ratio | >108 dB (digital source), 1kHz, A-weighted; >103 dB (analog line source), 1kHz, A-weighted | |
| THD+N | <0.002% (digital source), 20 Hz to 20 kHz; <0.005% (analog line source), 20 Hz to 20 kHz; <0.05% (microphone source), 20 Hz to 20 kHz | |
| Stereo Separation | >108 dB (digital source); >103 dB (analog source) | |
| Channel Separation | >108 dB (digital source); >103 dB (analog source) | |
| ||
| Output Power, 4/8 Ω | 20 Watts RMS per channel at 8 Ohms, 4 Ohms tolerant | |
| Output Power, 70/100V | 40 Watts RMS | |
| Frequency Response | 20 Hz to 20 kHz ±1 dB @ 20 Watts into 8 Ohms; 100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts | |
| S/N Ratio | 98 dB @ 20 Watts into 8 Ohms, 1 kHz, A-weighted; 96 dB @ 20 Watts in 4 Ohms, 1 kHz, A-weighted | |
| THD+N | <0.1% (1 kHz), <0.7% (20 Hz to 20 kHz), @ 20 Watts into 4 or 8 Ohms | |
| Stereo Separation | >65 dB @ 20 Watts, 1 kHz | |
| Connectors – Audio/Video Inputs | ||
| HDMI INPUT 1 – 4 | (4) 19-pin Type A HDMI female, digital video/audio inputs; Signal Types: HDMI, DVI, or DisplayPort Multimode[2,6] | |
| RGB INPUT 2 – 4 | (3) DB15HD female, analog RGB/video inputs; Signal Types: RGBHV, component, S-Video, or composite[5]; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL; Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms nominal; Sync Detection: RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 2.2k Ohms; Note: RGB Inputs 2-4 and HDMI Inputs 2-4 are mutually exclusive; HDMI overrides RGB when using the auto-switching feature | |
| Y, PB/Y, PR/C/COMP INPUT 4 | (3) BNC female comprising (1) auto-sensing multi-format analog video input; Signal Types: Component, S-Video, or composite; Formats: YPbPr, Y/C, NTSC or PAL; Input Level: 1 Vp-p nominal; Input Impedance: 75 Ohms nominal; Note: Video Input 4, RGB Input 4, and HDMI Input 4 are mutually exclusive; HDMI and RGB override Video when using the auto-switching feature | |
| SPDIF INPUT 4 | (1) RCA female, S/PDIF coaxial digital audio input; Input Impedance: 75 Ohms; Note: SPDIF Input 4 and HDMI Input 4 are mutually exclusive; HDMI overrides SPDIF when using the auto-switching feature | |
| AUD IN 1 – 4 | (4) 5-pin 3.5mm detachable terminal blocks; Balanced/unbalanced stereo line-level analog audio inputs; Input Impedance: 24k Ohms balanced/unbalanced; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced; Note: Analog Audio Inputs 1-4, SPDIF Input 4, and HDMI Inputs 1-4 are mutually exclusive; HDMI and SPDIF override Analog Audio when using the auto-switching feature | |
| MC1/LN1 – MC2/LN2 | (2) 5-pin 3.5mm detachable terminal blocks; Comprises (2) balanced microphone/line audio inputs; Balanced Mic Input Level: -60 to 0 dBV, 1 Vrms maximum; Balanced Line Input Level: -31 to +11 dBV, 3.7 Vrms maximum; Unbalanced Line Input Level: -37 to +5 dBV, 1.85 Vrms maximum; Mic Input Impedance: 3.9k Ohms balanced; Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced; Phantom Power: 48 Volts DC, software enabled/disabled per channel | |
| Connectors – Audio/Video Outputs | ||
| SPEAKER OUTPUT 4Ω/8Ω L – R | (2) 2-pin 7.62mm 15A detachable terminal blocks; 4-8 Ohm stereo speaker-level audio output; Wire Size: Terminals accept up to 14 AWG; Output Power: 20W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant | |
| SPEAKER OUTPUT 70/100V | (1) 2-pin 7.62mm 15A detachable terminal block; Transformer-isolated 70 or 100 Volt mono speaker-level audio output; Wire Size: Terminals accept up to 14 AWG; Output Power: 40W RMS mono at 70 or 100 Volts; Note: 4Ω/8Ω and 70/100V outputs are mutually exclusive | |
| PROG OUT | (1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced | |
| AUX OUT 1 | (1) 5-pin 3.5mm detachable terminal blocks; Balanced/unbalanced stereo line-level audio outputs; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced | |
| HDMI OUTPUT 1 | (1) 19-pin Type A HDMI female, digital video/audio output; Signal Types: HDMI, DVI[2]; Note: HDMI and DM Outputs function in parallel | |
| DM OUTPUT 1 | (1) 8-pin RJ45 female, shielded; DM 8G+ output, HDBaseT compliant; PoDM and PoH PSE (Power Sourcing Equipment) port[4]; Connects to DM 8G+ input of a DM receiver/room controller or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[3]; Note: HDMI and DM Outputs function in parallel | |
| Connectors - Control & Power | ||
| IR/SERIAL OUT 1 – 4 | (4) 2-pin 3.5mm detachable terminal blocks; IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
| IR IN | (1) 3-pin 3.5mm detachable terminal block For connection of the CNXRMIRD IR Receiver[1]; Allows control from IR wireless remotes using RC-5 command set | |
| INPUT 1 – 4 | (1) 5-pin 3.5mm detachable terminal block; Comprises (4) programmable digital inputs; Input Voltage Range: 0 to 24 Volts DC, referenced to GND; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band; Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts; Pull-up Resistor: 2.2k Ohms per input | |
| RELAY 1 – 4 | (1) 8-pin 3.5mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts | |
| COM A – B | (2) DB9 male, bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support | |
| NET | (4) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, paralleled; Available Cresnet Power: 30 Watts | |
| SERVICE | (1) USB Type B female, for factory use only | |
| PoDM 48VDC IN | (1) 4-pin snap & lock power jack; 48 Volt DC power input for PoDM power pack[4]; Enables PoDM and PoH power sourcing | |
| 100-240V~4.0A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included | |
| G | (1) 6-32 screw, chassis ground lug | |
| LAN | (1) 8-wire RJ45 female, 10Base-T/100Base-TX/1000Base-T Ethernet port | |
| COMPUTER (front) | (1) USB Type B female; USB computer console port (cable included) | |
| LCD Display | ||
| Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line; Displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information | ||
| Controls & Indicators | ||
| NET | (1) yellow LED, indicates Cresnet bus activity | |
| LAN | (1) yellow LED, indicates Ethernet activity | |
| HW-R | (1) recessed miniature pushbutton for hardware reset, reboots the control system | |
| SW-R | (1) recessed miniature pushbutton for software reset, restarts the SIMPL program | |
| POWER | (1) pushbutton and green LED, programmable for system power control | |
| SOFTKEYS | (4) pushbuttons for activation of LCD driven functions and passcode entry | |
| MENU | (1) pushbutton, steps menu back one level | |
| Λ, V | (2) pushbuttons, scroll up or down through menu and adjust menu parameters | |
| ENTER | (1) pushbutton, executes highlighted menu or value | |
| VOLUME | (1) continuous turn rotary encoder, adjusts menu parameters, defaults to Program audio volume | |
| MUTE | (1) pushbutton and red LED, mutes the Program audio output | |
| ROUTE | (1) pushbutton and red LED, selects ROUTE mode to allow routing changes | |
| VIEW | (1) pushbutton and red LED, selects VIEW mode to view current routing | |
| INFO | (1) pushbutton and red LED, selects INFO mode to view AV and device info | |
| INPUT 1 – 4 | (4) pushbuttons and red LEDs, select input to be routed | |
| OUTPUT 1, PROG, AUX 1 | (3) pushbuttons and red LEDs, select output destination(s) | |
| SPEAKER OUTPUT | (1) 3-position slide switch, selects the amplifier output configuration | |
| DM OUTPUT 1 (rear) | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence | |
| DM OUTPUT 1 PoDM (rear) | (1) green LED, indicates downstream device is drawing power over DM | |
| LAN (rear) | (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status | |
| Power Requirements | ||
| Main Power | 4 Amps @ 100-240 Volts AC, 50/60 Hz | |
| Available Cresnet Power | 30 Watts | |
| Power over DM (PoDM) | PoDM PSE (Power Sourcing Equipment), supplies power to a PoDM Powered Device[4] | |
| Power over HDBaseT (PoH) | PoH PSE (Power Sourcing Equipment), supplies power to a PoH Powered Device[4] | |
| PoDM Power Pack | 1.875 Amp @ 48 Volts (100-240 Volts AC, 50/60 Hz power pack, model PW-4818DU sold separately) | |
| Environmental | ||
| Temperature | 41° to 104°F (5° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | 277 BTU/hr | |
| Enclosure | ||
| Chassis | Metal, black finish, fan-cooled, vented sides | |
| Front Panel | Metal, black finish with polycarbonate label overlay | |
| Mounting | Freestanding or 3U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 5.20 in (133 mm) without feet | |
| Width | 17.28 in (439 mm); 19.00 in (483 mm) with rack ears | |
| Depth | 16.31 in (415 mm) | |
| Weight | ||
| 16.3 lb (7.4 kg) | ||
Отзывы
Напишите ваш собственный отзыв
Вы возможно также заинтересованы в следующих товарах
Crestron DigitalMedia™ Presentation System 300
Обычная цена: 1 406 720,00 руб.
Special Price 448 000,00 руб.