Описание товара
Подробности
Room Media Controller and QuickMedia® Receiver. Room Media Controller and QuickMedia Receiver. Includes PW-2420RU power supply.
- 2-Series Ethernet Control System and QuickMedia Receiver
- Built-in Web server supports e-Control 2 and RoomView
- RS-232, IR, digital in and relay control ports
- Composite, S-Video and RGBHV outputs
- Onboard audio mixing, equalization, and delay processing
- 3 Balanced audio line outputs and built-in 20W stereo amplifier
- 22 nS delay skew compensation and self-peaking audio
- Easy configuration and setup using SystemBuilder software
Дополнительная информация
Processor | ||
CPU | 32-bit Freescale ColdFire® Microprocessor | |
Memory | ||
SDRAM | 32 MB | |
NVRAM | 256 KB | |
Flash | 4 MB | |
Operating System | ||
Real-time, preemptive, multitasking kernel, multi-threaded; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® | ||
Ethernet | ||
10/100BaseT, static IP or DHCP/DNS, SSL, auto-negotiating, full duplex TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView® applications | ||
Video | ||
Signal Types | RGB and composite, S-Video, or component† video | |
Video/HDTV Formats | NTSC or PAL, HDTV up to 1080i/1080p† | |
RGB Formats | RGBHV, RGBS, or RGsB | |
Gain | 0dB (75 ohms terminated) | |
Maximum Resolution | 1920 x 1200 @ 60Hz (at unity gain) with maximum cable length of 450 feet and maximum compensation | |
QM Cable Compensation | 10-bit digitally controlled PEAK (bandwidth) and BOOST (frequency); 4-bit digitally controlled SKEW delay, 0 to 22 ns (independent for R/Pr, G/Y, and B/Pb) | |
Audio | ||
Features | 4x3 mic/program matrix mixer, 2-channels mic EQ, stereo volume/tone control and EQ on PROGRAM output, mono volume/tone control and EQ/delay on SPEECH output, integrated power amplifier, QM auto-compensation with self-peaking | |
D-A Conversion | 24-bit, 48 kHz | |
Output Volume Range | -80dB to +20dB, 0.1dB steps | |
Mixer Volume Range | -80dB to 0dB, 0.1dB steps | |
Input Compensation | ±10dB, 0.1dB steps | |
Mic EQ Filter Gain | ±12dB, 0.1dB steps | |
Mic EQ Filter Center Frequencies | 160, 500, 1.2k, 3k Hz | |
Bass Gain Range | ±12dB @ 100Hz, 0.5dB steps | |
Treble Gain Range | ±12dB @ 10kHz, 0.5dB steps | |
Output Equalization | 10-band graphic + 2-band parametric | |
PEQ Filter Gain | ±12dB, 0.1 dB steps | |
PEQ Filter Bandwidth | 0.1 to 3.0 octaves, 0.1 octave steps | |
PEQ Filter Center Frequency | 25Hz to 20kHz, 0.5Hz steps | |
PEQ Filter Types | Low Pass, High Pass, Peaking Eq, Notch, Treble Shelf, Bass Shelf | |
GEQ Filter Gain | ±12dB, 0.1dB steps | |
GEQ Filter Center Frequencies | 31, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz | |
Speech Output Delay | 0 to 40 mS, 1mS steps | |
Frequency Response | 20Hz to 20kHz ±0.5dB | |
S/N Ratio | 94dB (line), 90dB (speaker) 20Hz to 20kHz A-weighted | |
THD+N | 0.05% (line), 0.7% (speaker) 20Hz to 20kHz | |
Connectors – Front Panel | ||
QM | (1) 8-wire RJ45 female, QuickMedia input port; Connects to QM output port of any QuickMedia device via CresCAT-QM or CRESCAT-IMcable* | |
NET | (2) 4-pin 3.5mm detachable terminal blocks; Cresnet ports (paralleled), Master/Slave selectable; Connect to Cresnet control network via CresCAT-QM or Cresnet cable | |
24VDC | (1) 2.1mm barrel DC power jack; 24 Volt DC power input (power supply included); Passes through to NET ports to power additional Cresnet devices | |
LAN | (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity | |
SPEAKER L – R | (2) 2-pin 5mm detachable terminal blocks; Left & Right Speaker-level audio outputs; Output Power: 10 Watts per channel at 4 or 8 ohms | |
Connectors – Rear Panel | ||
S-VIDEO | (1) 4-pin mini DIN female, S-Video (Y/C) output; Output Level: 1.0 Vp-p (luma), 0.7 Vp-p (chroma); Output Impedance: 75 ohms | |
VIDEO | (1) BNC female, composite video output; Output Level: 1.0 Vp-p Output Impedance: 75 ohms | |
RGBHV | (1) DB15HD female, RGB(VGA)/component video† output; Formats: RGBHV, RGBS, RGsB, YPbPr; Output Level: 1 Vp-p nominal; Sync Level: 5 Vp-p nominal; Output Impedance: 75 ohms; H/V Sync Impedance: 100 ohms | |
G | 6-32 screw, chassis ground lug | |
AUDIO | (1) 9-pin 3.5mm detachable terminal block; Comprises (3) balanced line-level audio outputs; Output Impedance: 200 ohms balanced, 100 ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced | |
INPUT 1 – 4 | (1) 5-pin 3.5mm detachable terminal block; Comprises (4) digital/contact closure inputs; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band | |
IR | (1) 2-pin 3.5mm detachable terminal block; IR/Serial port; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 9600 baud | |
COM A – B | (2) DB9 male, bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support; Com port B also serves as the computer console port | |
RELAY OUTPUT 1 – 2 | (2) 2-pin 3.5mm detachable terminal blocks comprising (2) normally open, isolated relays; Rated 2 Amp, 50 Volts AC/DC; MOV arc suppression across contacts | |
LED Indicators | ||
QM LINK | (red) Indicates presence of a digital audio signal to signify a valid QM connection | |
NET | (yellow) Indicates communication with Cresnet system | |
PWR | (green) Indicates DC power supplied to unit | |
ACT | (red) Indicates activity on the LAN port | |
COM A – B | (red x2) Indicate activity on each respective COM port | |
IR | (red) Indicates activity on the IR port | |
INPUT | (red) Indicate activity on any digital input port | |
Buttons | ||
HW-R | Hardware reset (reboots the control system) | |
SW-R | Software reset (restarts the SIMPL program) | |
Power Requirements | ||
38 Watts (1.6 Amps) @ 24 Volts DC (PW-2420RU power supply included) | ||
Available Cresnet Power | 12 Watts using PW-2420RU (included) | |
Cresnet Power Usage | 38 Watts (1.6 Amps @ 24 Volts DC) with no power supply connected to the 24VDC connector | |
Environmental | ||
Temperature | 41° to 104°F (5° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Enclosure | ||
Chassis | Steel, black matte powder coat finish, fan-cooled, vented top and sides | |
Mounting | Free-standing, surface-mount, or pole-mount (adhesive feet and [4] “L” brackets included, MK-QM-RMCRX pole mount kit sold separately) | |
Dimensions | ||
Height | 2.53 in (6.43 cm) | |
Width | 7.67 in (19.48 cm) | |
Depth | 6.04 in (15.34 cm) | |
Weight | ||
1.7 lbs (0.77 kg) |