Описание товара
Подробности
A Crestron 2-Series control system processor featuring built-in AV Switching, audio DSP, control ports and 10/100 Ethernet.
- 2-Series engine | Dual-bus architecture
- Integrated AV Switcher/Processor
- Cresnet port - master/slave selectable
- 10/100 Ethernet | SSL encryption
- e-Control 2 and RoomView enabled | SNMP support
- 2 Com ports (RS-232/422/485)
- 4 IR/serial ports
- 4 Versiport I/O ports
- 4 Low-voltage relay ports
- IR wireless compatible using CNXRMIRD
- Complete setup in minutes using MP2 Wizard Software
- External power pack included
- Single-space EIA rack-mountable
Дополнительная информация
| Memory | ||
| SDRAM | 32 MB | |
| NVRAM | 256 KB | |
| Flash | 4 MB | |
| Operating System | ||
| Real-time, preemptive, multitasking kernel, multi-threaded; FAT32 file system with long names; supports SIMPL Windows™ and SIMPL+® | ||
| Ethernet | ||
| 10/100BaseT, static IP or DHCP/DNS, SSL, auto-negotiating, full duplex TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications | ||
| Video | ||
| Switcher | 4x2 composite matrix switcher or 2x1 Y/C (S-Video) switcher | |
| Bandwidth | 100MHz minimum | |
| Crosstalk | -60dB | |
| Audio | ||
| Features | 7x1 stereo audio switcher, digital parametric and/or graphic equalizer | |
| Master Volume | -80dB to +20dB, 1dB steps | |
| Input Compensation | ±10dB, 0.1dB steps from DMT, 0.2dB steps from SIMPL | |
| Bass Gain Range | ±15dB @ 100Hz, 0.5dB steps | |
| Treble Gain Range | ±15dB @ 10kHz, 0.5dB steps | |
| Equalization Modes | 6-band parametric; 3-band graphic + 3-band parametric; 5-band graphic + 1-band parametric; 5-band graphic + 1-band parametric (speech-optimized) | |
| PEQ Filter Gain | ±12dB, 0.01dB steps from DMT; +24/-36dB, 0.1dB steps from SIMPL | |
| PEQ Filter Bandwidth | 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from DMT, 0.02 to 3.5 octaves from SIMPL, 0.01 octave steps | |
| PEQ Filter Center Frequency | 25Hz to 19.9kHz from DMT; 5Hz to 24KHz from SIMPL, 1Hz steps | |
| PEQ Filter Types | low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf | |
| GEQ Filter Gain | ±12dB from DMT, ±10dB from SIMPL, 0.1dB steps | |
| GEQ Filter Center Frequencies | 63Hz, 250Hz, 1kHz, 4kHz, 10kHz (5-band); 160Hz, 600Hz, 1kHz, 2.5kHz, 5kHz (5-band speech); 250Hz, 1kHz, 4kHz (3-band) | |
| Frequency Response | 20Hz to 20kHz +0/-0.5 dB | |
| THD+N | <0.005% at 1kHz, A-weighted, maximum input/output | |
| S/N Ratio | >97 dB, 20Hz to 20kHz A-weighted | |
| Channel Separation | >100dB at 1kHz; 90dB 20Hz to 20kHz | |
| Crosstalk | > -90dB 20Hz to 20kHz | |
| Common Mode Rejection | >85dB 20Hz to 20kHz | |
| Connectors – Video | ||
| VIDEO IN 1 - 4 | (4) BNC female comprising (4) composite or (2) S-Video inputs; Input Impedance: 75 ohms; Discrete video sensing on each input | |
| VIDEO OUT 1 - 2 | (2) BNC female comprising (2) composite or (1) S-Video outputs; Output Impedance: 75 ohm | |
| Connectors – Audio | ||
| AUDIO IN 1 - 2 | (2) 5-pin 3.5mm detachable terminal blocks comprising (2) balanced/unbalanced stereo line-level inputs; Input Impedance: 15k ohms balanced, 10k ohms unbalanced; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced | |
| AUDIO IN 3 - 7 | (5) 3-pin 3.5mm detachable terminal blocks comprising (5) unbalanced stereo line-level inputs; Input Impedance: 10k ohms; Maximum Input Level: 2 Vrms | |
| AUDIO OUT L/R | (1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level output; Output Impedance: 200 ohms balanced, 100 ohms unbalanced; Maximum Output Level: 3.6 Vrms balanced, 1.8 Vrms unbalanced | |
| Connectors – Control & Power | ||
| COM A - B | (2) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; All ports support C2N-NPA8 Network Poll Accelerator | |
| IR SERIAL OUT A - D | (4) 2-pin 3.5mm detachable terminal blocks; IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port, allowing simultaneous firing of all ports | |
| I/O Versiports 1 - 4 | (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin | |
| RELAY OUTPUT 1 - 4 | (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts | |
| IR IN | (1) 3-pin 3.5mm detachable terminal block; For connection of the CNXRMIRD IR Receiver (sold separately); Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands | |
| LAN | (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity | |
| COMPUTER | (1) DB9 female, RS-232 computer console port | |
| NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator | |
| 24VDC | (1) 2.1mm barrel DC power jack, 24 Volt DC power input (PW-2420RU power pack included) Passes through to NET port to power Cresnet devices | |
| Ground | (1) 6-32 screw, chassis ground lug | |
| Reset Buttons | ||
| HW-R | Hardware reset (reboots the control system) | |
| SW-R | Software reset (restarts the SIMPL program) | |
| LED Indicators | ||
| PWR | (1 green) Indicates DC power supplied to unit | |
| NET | (1 yellow) Indicates Cresnet bus activity | |
| MSG | (1 red) Indicates control system has generated an error message | |
| LNK | (1 red) Indicates a valid connection on LAN port | |
| ACT | (1 red) Indicates activity on LAN port | |
| Power Requirements | ||
| Power Pack | 2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included | |
| Available Cresnet Power | 30 Watts using PW-2420RU power pack (included) | |
| Cresnet Power Usage | 18 Watts (0.75 Amp @ 24 Volts DC) usinf Cresnet network power (no power pack connected to the 24VDC connector) | |
| Environmental | ||
| Temperature | 41° to 113°F (5° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Chassis | Metal, black matte finish | |
| Faceplate | Extruded aluminum, black matte finish with polycarbonate label overlay | |
| Mounting | Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 1.70 in (44 mm) | |
| Width | 17.03 in (433 mm); 19.0 in (483 mm) with ears | |
| Depth | 9.08 in (231 mm) | |
| Weight | ||
| 3.54 lbs (1.61 kg) | ||
