Описание товара
Подробности
-
Дополнительная информация
Audio | |||
---|---|---|---|
Voltage gain | |||
XPA 2002-70V | 57x (35 dB) | ||
XPA 2002-100V | 81x (38 dB) | ||
Crosstalk | 75 dB (typical) @ 1 kHz | ||
CMRR | 75 dB (typical) @ 1 kHz | ||
Audio input | |||
Number/signal type | 2 balanced/unbalanced | ||
Connectors | (2) 3.5 mm captive screw connectors, 3 pole | ||
Impedance | >10k ohms unbalanced/balanced, DC coupled | ||
Nominal level | +4 dBu (1.23 Vrms), balanced | ||
Maximum level | +21 dBu (8.69 Vrms), balanced | ||
Input sensitivity | +4 dBu (1.23 Vrms) | ||
Input signal detection threshold | -40 dBu ±3 dB, balanced | ||
| |||
Audio output | |||
Number/signal type | |||
XPA 2002-70V | 2 channels 70 V | ||
XPA 2002-100V | 2 channels, 100 V | ||
Connectors | (2) 5 mm screw lock captive screw connectors, 2 pole | ||
| |||
Load impedance | |||
XPA 2002-70V | 25 ohms minimum | ||
XPA 2002-100V | 50 ohms minimum | ||
Amplifier type | Class D | ||
Output power | |||
XPA 2002-70V | 200 watts rms per channel, 70 V, 1 kHz, 0.1% THD | ||
XPA 2002-100V | 200 watts rms per channel, 100 V, 1 kHz, 0.1% THD | ||
Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
THD + Noise | 0.1%, 1 kHz, 3 dB below clipping | ||
S/N | 100 dB, 20 Hz - 20 kHz, unweighted | ||
Damping factor | |||
XPA 2002-70V | >100 @ 25 ohms | ||
XPA 2002-100V | >100 @ 50 ohms | ||
High pass filter | |||
XPA 2002-70V | 80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable) | ||
XPA 2002-100V | 80 Hz, 12 dB per octave rolloff for 100 V line output (switch selectable) | ||
Control/remote — amplifier | |||
Control port | (1) 3.5 mm captive screw connector, 2 pole | ||
Pin configurations | |||
Standby power control (contact closure) | Pin 1 = GND, pin 2 = standby | ||
General | |||
Power supply | Internal Input: 100-240 VAC, 50-60 Hz, 1.5 A | ||
Power consumption at 115 VAC, 60 Hz | |||
Typical (1/8 power) | |||
XPA 2002-70V | 70 V (x2): 84.5 watts | ||
XPA 2002-100V | 100 V (x2): 89.6 watts | ||
Quiescent | |||
XPA 2002-70V | 20.8 watts | ||
XPA 2002-100V | 25.1 watts | ||
Standby | <1 watt (triggered by contact closure or after 25 minutes [±5 minutes] with no signal) | ||
Power consumption at 230 VAC, 50 Hz | |||
Typical (1/8 power) | |||
XPA 2002-70V | 70 V (x2): 84.5 watts | ||
XPA 2002-100V | 100 V (x2): 90.4 watts | ||
Quiescent | |||
XPA 2002-70V | 23.1 watts | ||
XPA 2002-100V | 26.2 watts | ||
Standby | <1 watt (triggered by contact closure or after 25 minutes [±5 minutes] with no signal) | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Convection, no vents, with heat sinks on the sides | ||
Thermal dissipation at 115 VAC, 60 Hz | |||
Standby | <1 watt (3 BTU/hr) | ||
Idle | |||
XPA 2002-70V | 20.8 watts (71 BTU/hr) | ||
XPA 2002-100V | 25.1 watts (86 BTU/hr) | ||
1/8 power | |||
XPA 2002-70V | 70 V (x2): 34.5 watts (118 BTU/hr) | ||
XPA 2002-100V | 100 V (x2): 39.6 watts (135 BTU/hr) | ||
Thermal dissipation at 230 VAC, 50 Hz | |||
Standby | <1 watt (3 BTU/hr) | ||
Idle | |||
XPA 2002-70V | 23.1 watts (79 BTU/hr) | ||
XPA 2002-100V | 26.2 watts (89 BTU/hr) | ||
1/8 power | |||
XPA 2002-70V | 70 V (x2): 35.6 watts (122 BTU/hr) | ||
XPA 2002-100V | 100 V (x2): 40.4 watts (138 BTU/hr) | ||
Protection | Clip limiting, thermal, short circuit, DC output | ||
Indication | Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, short circuit, or DC output protection | ||
Mounting | |||
Rack mount | Yes, with included mounting brackets | ||
Enclosure type | Metal | ||
Enclosure dimensions | 1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide) (4.3 cm H x 44.2 cm W* x 30.5 cm D) *Width excludes rack ears. 19.0" (48.3 cm) W with rack ears. | ||
Product weight | 9.2 lbs (4.2 kg) | ||
Shipping weight | 12 lbs (6 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CCC, CE, c-UL, GS, KCC, PSE, S-Mark, UL Meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment. | ||
EMI/EMC | CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, VCCI Class B | ||
Environmental | Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE | ||
Warranty | 3 years parts and labor | ||
| |||
|