Описание товара
Подробности
The Extron MLS 506SA is a simple-to-use, six input, multi-format switcher that provides composite video, S-video, component video, and RGB video switching, along with stereo audio input switching. An additional input accepts balanced/unbalanced mono line level audio signals for mixing with any of the four switchable inputs. The switcher features an integrated audio amplifier with 50 watts, 2 x 25 watts rms, into 4 or 8 ohm speaker loads for use of program speakers, and includes two preamp audio outputs. For enhanced operation, ease of room control, and simplified system integration, the MLS 506SA can be controlled with a TouchLink® Control System or MediaLink® Controller.
Дополнительная информация
Video | |||
---|---|---|---|
Gain | Unity | ||
Bandwidth | 350 MHz (-3 dB), fully loaded | ||
Frequency response | < ±0.1 dB @ 30 MHz | ||
Differential phase error | 1.5° at 3.58 MHz and 4.43 MHz | ||
Differential gain error | 1.5% at 3.58 MHz and 4.43 MHz | ||
Crosstalk | -50 dB @ 5 MHz | ||
Video input | |||
Number/signal type | 3 RGBHV, RGBS, RGsB, or RsGsBs 3 component video, S-video, or composite video | ||
Connectors | Female BNCs | ||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video | ||
Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset | ||
Impedance | 75 ohms | ||
Horizontal frequency | 15 kHz to 150 kHz | ||
Vertical frequency | 30 Hz to 150 Hz | ||
Return loss | <-45 dB @ 5 MHz | ||
DC offset (max. allowable) | 1.5 V | ||
Video output | |||
Number/signal type | 1 RGBHV, RGBS, RGsB, or RsGsBs 1 component video 1 S-video 1 composite video | ||
Connectors | Female BNCs | ||
Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video | ||
Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset (follows input) | ||
Impedance | 75 ohms | ||
Return loss | -45 dB @ 5 MHz | ||
DC offset | ±5 mV | ||
Switching type | Triple-Action for RGB | ||
Sync | |||
Input/output type | RGBHV, RGBS, RGsB, RsGsBs (output follows input) | ||
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
Input level | 2 V to 5 Vp-p | ||
Output level | TTL: 5.0 Vp-p | ||
Input impedance | >1k ohms | ||
Output impedance | 75 ohms, unterminated | ||
Max. input voltage | 5 Vp-p | ||
Max. propagation delay | 30 ns | ||
Polarity | Positive or negative (follows input) | ||
Audio | |||
Gain: line level, fixed output | |||
MLS 506 | |||
Unbalanced | 0 dB | ||
Balanced | +6 dB | ||
MLS 506MA/506SA | |||
Unbalanced | 0 dB | ||
Balanced | +6 dB | ||
Gain: line level, variable output | Selectable output level | ||
MLS 506 | |||
Unbalanced | 0 dB (jumper selectable), or -6 dB (jumper selectable, default) | ||
Balanced | +6 dB (jumper selectable), or 0 dB (jumper selectable, default) | ||
MLS 506MA, MLS 506SA | |||
Unbalanced | 0 dB (jumper selectable), or -6 dB (jumper selectable, default) | ||
Balanced | +6 dB (jumper selectable), or 0 dB (jumper selectable, default) | ||
Frequency response | |||
MLS 506 | 20 Hz to 20 kHz, +0 dB/-3 dB | ||
MLS 506MA | 50 Hz to 15 kHz, +0 dB/-3 dB; 20 Hz to 20 kHz, +0 dB/-3 dB at 30 watts into 8 ohms | ||
MLS 506SA | 20 Hz to 20 kHz, ±3 dB at 25 W into 8 ohms | ||
THD + Noise | |||
MLS 506 | <0.2% @ 50 Hz to 22 kHz at nominal level | ||
MLS 506MA (amp. output) | <1% @ 50 Hz to 20 kHz at 30 watts into 8 ohms <0.5% @ 1 kHz at 30 watts into 8 ohms | ||
MLS 506SA (amp. output) | <0.5% @ 1 kHz at 25 W into 8 ohms | ||
S/N | >75 dB at 20 Hz to 20 kHz (unweighted) | ||
Crosstalk | <-65 dB @ 20 Hz to 20 kHz, <-80 dB @ 1 kHz and below 60 Hz, fully loaded | ||
Stereo channel separation | |||
MLS 506SA | >80 dB @ 1 kHz | ||
All other models | >90 dB @ 1 kHz | ||
CMRR | >90 dB @ 20 Hz to 200 Hz, >60 dB @ 20 Hz to 20 kHz | ||
| |||
Audio input | |||
Number/signal type | |||
MLS 506 | 6 stereo, balanced/unbalanced | ||
MLS 506MA/SA | 7 stereo, balanced/unbalanced | ||
Connectors | |||
MLS 506 | (6) 3.5 mm captive screw connectors, 5-pole | ||
MLS 506MA/SA | (7) 3.5 mm captive screw connectors, 5-pole | ||
Impedance | >18k ohms unbalanced/balanced, DC coupled | ||
Nominal level | -20 dBV (100 mVrms), -10 dBV (316 mVrms), 0 dBu (0.775 Vrms), or +4 dBu (1.23 Vrms); (configurable) | ||
Maximum level | +21 dBu (balanced or unbalanced) at 1% THD+N | ||
Input gain adjustment | |||
MLS 506 | -15 dB to +9 dB, adjustable per input | ||
Input level adjustment | |||
MLS 506MA, MLS 506SA | -42 dB to +24 dB, 1 to 100 steps, adjustable per input | ||
Input level sensitivity | |||
MLS 506MA/SA | -20 dBV (100 mVrms) for 30 watt output | ||
Audio — effects return (MLS 506MA and MLS 506SA) | |||
Number/signal type | 1 stereo, unbalanced | ||
Connectors | (1) 3.5 mm captive screw connector, 3 pole | ||
Impedance | >10k ohms, unbalanced | ||
Level | +4 dBu, unbalanced | ||
Audio — effects send (MLS 506MA and MLS 506SA) | |||
Number/signal type | 1 stereo, unbalanced | ||
Connectors | (1) 3.5 mm captive screw connector, 3 pole | ||
Impedance | 50 ohms, unbalanced | ||
Level | +4 dBu, unbalanced | ||
Audio output — line level (all models) | |||
Number/signal type | 2 stereo/mono (selectable), balanced/unbalanced (1 fixed, 1 variable) | ||
Connectors | (2) 3.5 mm captive screw connectors, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Gain error | ±0.1 dB channel to channel | ||
Maximum level (Hi-Z) | >+21 dBu, balanced at 1%THD+N | ||
Maximum level (600 ohm) | >+15 dBm, balanced at 1%THD+N | ||
Audio output — power amp (MLS 506MA and MLS 506SA) | |||
Number/signal type | |||
MLS 506MA | 1 mono | ||
MLS 506SA | 1 stereo | ||
Connectors | (1) 4 position screw terminal | ||
Drive/power (full power out) | At less than 0.5% THD at 1 kHz: | ||
MLS 506MA (70V, mono) | 30 watts (rms); 4 ohm, 8 ohm, or 70 V output taps with common/ground, transformer coupled | ||
MLS 506MA (100V, mono) | 30 watts (rms); 4 ohm, 8 ohm, or 100 V output taps with common/ground, transformer coupled | ||
MLS 506SA (stereo) | 50 watts; 25 watts (rms) per channel, 4 ohm or 8 ohm load | ||
Protection | |||
MLS 506MA | Input limiting, thermal, short circuit | ||
MLS 506SA | Input limiting (user specifies 4 ohm or 8 ohm load), thermal, short circuit | ||
Indication | |||
MLS 506MA | Clip LED indicates the onset of 30 watt power limiting | ||
MLS 506SA | Clip LED indicates the onset of 25 watt power limiting on left or right | ||
Control/remote — switcher | |||
Serial control port | 1 RS-232, female 9-pin D connector (shared with contact closure port) (1) 3.5 mm captive screw connector, 5 pole (for control via MLC 206; shared with IR control port) | ||
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Serial control pin configuration | 2 = TX, 3 = RX, 5 = GND | ||
Contact closure | 1 female 9-pin D connector (shared with serial control port) | ||
Contact closure pin configuration | pin 1 = input 1, pin 4 = input 2, pin 5 = ground, pin 6 = input 3, pin 7 = input 4, pin 8 = input 5, pin 9 = input 6 | ||
IR control port | (1) 3.5 mm captive screw connector, 5 pole (shared with the MLC/IR serial control port) for 38 kHz IR signals | ||
Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS)™ | ||
General | |||
Power | 100 VAC to 240 VAC, 50-60 Hz, internal | ||
MLS 506 | 20 watts | ||
MLS 506MA | 60 watts | ||
MLS 506SA | 80 watts | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Convection, vents on both sides and top | ||
Mounting | |||
Rack mount | Yes, with included brackets | ||
Enclosure type | Metal | ||
Enclosure dimensions | 3.5" H x 17.5" W x 9.4" D (2U high, full rack wide) 8.9 cm H x 44.4 cm W x 23.9 cm D (Depth excludes connectors and knobs. Width excludes rack ears.) | ||
Product weight | |||
MLS 506 | 7.0 lbs (3.2 kg) | ||
MLS 506MA | 10.2 lbs (4.6 kg) | ||
MLS 506SA | 8.6 lbs (3.9 kg) | ||
Shipping weight | |||
MLS 506 | 14 lbs (7 kg) | ||
MLS 506MA | 17 lbs (8 kg) | ||
MLS 506SA | 16 lbs (8 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
Compliances | CE, C-tick, FCC Class A, ICES, VCCI | ||
Warranty | 3 years parts and labor |