Описание товара
Подробности
Оптический удлинитель сигнала DVI, Audio и RS-232 - Передатчик Singlemode. Возможна поставка снятых с производства устройств, по запросу.
Дополнительная информация
| FOX 500 DVI Tx | |||
| |||
| |||
| |||
| Optical fiber interconnection between transmitter and receiver | |||
|---|---|---|---|
| Number/type | 1 or 2 fiber optic | ||
| |||
| Connectors | 2 LC connectors | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a FOX 500 DVI SM | ||
| Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cables with a FOX 500 DVI MM 1 km (3280') with 50 µm OM2 multimode (MM) cables with a FOX 500 DVI MM 2 km (6561') with 50 µm OM3/OM4 laser optimized multimode cable with a FOX 500 DVI MM | ||
| |||
| Nominal peak wavelength | 850 nm for FOX 500 DVI MM, 1310 nm for FOX 500 DVI SM | ||
| Data rate | 4.25 Gbps | ||
| Transmission power | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Video | |||
| Resolution range | Single link DVI and HDMI digital video signals are supported, including 640x480 @ 60 Hz through 1600x1200 @ 60 Hz, and also HDTV signals at 480p, 720p, 1080i, and 1080p. Higher resolutions up to 1920x1200 @ 60 Hz, undersampled | ||
| |||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI | ||
| Video input and loop-through | |||
| Number/signal type | 1 DVI-D (or HDMI*) input 1 DVI-D (or HDMI*) loop-through | ||
| Connectors | 1 female DVI-I for input 1 female DVI-I for loop-through | ||
| Nominal level | 0.8 Vp-p | ||
| Impedance | 100 ohms | ||
| Audio | |||
| Gain | |||
| Range | Adjustable, -18 dB to +10 dB | ||
| Default | |||
| Captive screw connector | Unbalanced output: -6 dB; balanced output: 0 dB | ||
| Mini stereo jack | Unbalanced output: 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.10% @ 1 kHz at nominal level | ||
| S/N | >80 dB at maximum output (unweighted) | ||
| CMRR | 65 dB @ 20 Hz to 20 kHz | ||
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
| Sampling rate | 48 kHz | ||
| Audio input | |||
| Number/signal type | 2 inputs (mixed): 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole (1) 3.5 mm mini stereo jack | ||
| Impedance | 18k ohms unbalanced, 20k ohms balanced, DC coupled | ||
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) | ||
| Maximum level | +17 dBV, (unbalanced) at 1% THD+N | ||
| |||
| Control/remote | |||
| Serial control ports | |||
| Control | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel) 1 RS-232, 2.5 mm mini stereo jack (front panel) | ||
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel) | ||
| Baud rate and protocol | |||
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Pass-through | 9600 to 115,200 baud | ||
| Serial control pin configurations | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND | ||
| Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) | ||
| General | |||
| Power supply | Internal Input: 100-240 VAC, 50-60 Hz | ||
| Power consumption | 10.0 watts | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
| Cooling | Convection, vented left to right, vents on side panels | ||
| Mounting | |||
| Rack mount | Yes, with optional rack shelf kit | ||
| Furniture mounting holes | Yes, with optional under desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D) (Depth excludes connectors and knobs.) | ||
| Product weight | 2.3 lbs (1.0 kg) per unit | ||
| Shipping weight | 4 lbs (2 kg) per unit | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, FDA Class 1, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Warranty | 3 years parts and labor | ||
