Описание товара
Подробности
Crestron Green Light® sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-OIR-C-450 is a low-profile ceiling mount occupancy sensor designed for small areas up to 450 square feet to detect when the room is occupied. Advanced self-adaptive, passive infrared motion sensing affords excellent reliability for control of lighting, climate control and other devices in the room.
Дополнительная информация
Sensing | ||
Sensor Technology | Passive Infrared | |
Auto-Adjustment | Microprocessor-based self-adaptive | |
Ambient Light Recognition | Built-in photocell for ambient light override | |
Coverage Area | 450 sq. ft. | |
Coverage Pattern | 360 degrees | |
Major Motion Area | 24 feet diameter | |
Minor Motion Area | 10 feet diameter | |
Memory | ||
Built-in non-volatile memory retains all settings in case of power loss | ||
LED Indicators | ||
IR | (1) Red LED, indicates infrared motion | |
Controls (Behind Cover) | ||
Infrared Range | (1) Red adjustment knob; Adjusts sensitivity of infrared motion sensor; Adjustment Range: 0% to 100% (75% factory default) | |
Delayed-Off Time | (1) Black adjustment knob; Adjusts delayed-off time duration; Adjustment Range: 30 seconds to 30 minutes (10 minutes factory default, 6 seconds in test mode) | |
Ambient Light Threshold | (1) Blue adjustment knob; Adjusts threshold for ambient light override; Adjustment Range: 100 to 3000 Lux (3000 Lux factory default) | |
DIP Switch A | (1) 4-position DIP switch 1: (not used); 2: (not used); 3: Disables auto-adapting; 4. Disables walk-thru mode | |
DIP Switch B | (1) 4-position DIP switch 1: Forces control signal output high (room lights on); 2: Forces control signal output low (room lights off); 3: Enters or exits Test Mode (toggle “on” then “off”); 4: Disables both LED indicators | |
Connections | ||
Power | (1) Red 6” flying lead, 24 AWG; +24 Volt DC power input | |
Common | (1) Black 6” flying lead, 24 AWG; Power and control signal common | |
Occupancy | (1) Blue 6” flying lead, 24 AWG; Occupancy sensor control signal output; Provides 24 Volts DC high logic signal when occupancy is detected; Short circuit protected; Connects to a GLS-SIM Integration Module[2], or to a Versiport I/O Input control port on any Crestron control system | |
Occupancy w/Photocell | (1) Gray 6” flying lead, 24 AWG; Occupancy sensor control signal output with ambient light override; Provides 24 Volts DC high logic signal when occupancy is detected and ambient light is below set threshold; Short circuit protected; Used instead of the blue “Occupancy” connection when ambient light override is desired | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 0% to 95% RH (non-condensing) | |
Power Requirements | ||
Current Consumption | 20 mA @ 24 Volts DC | |
Cresnet Power Usage | 1 Watt[1] | |
Housing | ||
Construction | High-impact injection-molded plastic, white | |
Mounting | Surface mount directly to drop-tile or drywall, 4” octagon box (1.5” minimum depth), or round fixture box (Wiremold® V5738 or equivalent) | |
Dimensions | ||
Height | 1.55 in (3.94 cm) | |
Diameter | 4.20 in (10.67 cm) | |
Weight | ||
5.0 oz (142 g) |