Image | - 10,500 ANSI lumens
- 2,500-10,000:1 FOFO
- 650:1 ANSI
- Electronically adjustable iris (manual or dynamic)
|
Display technology and resolution | - 3-chip 0.95" DMD
- SXGA+ 1400 x 1050
- As little as one frame
|
Input signal compatibility | - Native dual-link DVI-D
- Analog BNC (optional)
- Frame-doubled 3D - dual-link DVI, VGA
- (HDMI, analog BNC and SDI optional)
- Pixel clock: 330MHz
|
Scan rates | - H - 15kHz to 120kHz
- V – 23.97Hz to 150Hz (up to 120Hz maximum output)*
|
Inputs, control & networking | - RS232 in/out
- RS422 in
- Ethernet (10/100)
- USB device
- GPIO (RS232 9-pin male connector)
- Built-in backlit LCD keypad
- Remote control (with optional wired XLR connection)
- Slot 1-2 standard (populated): dual-link DVI-D (330MHz) and VGA (165MHz)
|
Optional input modules | - Slots 3-4 unpopulated
- Full bandwidth analog BNC
- Dual-link DVI input card (330MHz), VGA (165MHz)
- Dual SD/HD-SDI
- Video decoder
- Twin HDMI
|
Lens mount and illumination | - Motorised horizontal and vertical lens offset
- Scheimpflug (tilt) adjustment
- Built-in light shutter
- Dual Osram PvIP 350W lamps
- 1,500 hrs @350W, 2,000 hrs @300W
|
Lenses (fixed) | - Christie ILS lens 0.73:1 SX+ / 0.67:1 HD*
- Christie ILS lens 1.2:1 SX+ / 1.1:1 HD
|
Lenses (zoom) | - Christie ILS lens 1.25-1.6:1 SX+ / 1.16-1.49:1 HD**
- Christie ILS lens 1.5-2.0:1 SX+ / 1.4-1.8:1 HD
- Christie ILS lens 2.0-2.8:1 SX+ / 1.8-2.6:1 HD
- Christie ILS lens 2.8-4.5:1 SX+ / 2.6-4.1:1 HD
- Christie ILS lens 4.5-7.5:1 SX+ / 4.1-6.9:1 HD
- Christie ILS lens 7.5-11.2:1 SX+ / 6.9-10.4:1 HD
|
Offsets | - +/- 100% Vertical
- +/- 50% Horizontal
- (* +/-23%V +/- 13%H)
- (** +/-70%V +/- 45%H)
|
Power requirements | - Operating voltage: 100V AC to 240V AC @ 50/60 Hz
- Operating current: 12A @ 100 V
- Power: 1320 W
- Dissipation: 4508 BTU/hr
|
Enhanced feature sets | - Embedded Christie Twist™ - internal advanced warping and edge-blending
- LiteLOC™
- Electronically adjusted iris (manual or dynamic)
- Dust-sealed, filter-free design
- Reduced power requirements (as compared to competitive products on the market today) – at maximum brightness the unit only draws 1320W; standby power consumption (phantom power draw) is less than 20W.
- Reduced noise levels
- LCD keypad – active keys are amber to indicate whether function selected will be seen by the audience
- Built-in portrait display capabilities*
*Christie M Series stacking frame is required in portrait orientation. |
Standard accessories | - User manual
- IR remote
- Line cord
- Two dual-link DVI-D cards
- 3D sync cable
|
Optional accessories | - Coarse dust filter
- ILS lens adapter kit
- Stacking frame dual HD/SDI input card
- Twin HDMI input card
- Video decoder input card*
*may not include 3D support |
Dimensions | - Size: (L x W x H): 22.1 x 19.7 x 10.2" (561 x 500 x 259mm)
- Weight: 55lb (25kg) (without lens)
- Shipping weight: 87lb (38kg) (without lens)
|
Operating environment | - Operating temperature: 40-104°F (5-40°C)
- Humidity (non-condensing): 20-80% non-condensing
|
Regulatory approvals | - UL/CSA/IEC 60950 (3rd edition)
- FCC Class A, CE, CCC
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, WEEE
|
Warranty | - 3 years parts and labour (including light engine)
|