Описание товара
Подробности
Компактный предусилитель микрофонный для приложений, где есть необходимость подключения микрофона к линейному входу коммутатора, микшера или входу Aux/Mix коммутаторов Extron MediaLink®. Обе модели обеспечивают фантомное питание 48 В., фильтр ВЧ с частотой среза 75 Гц и регулируемое усиление по входу от +25 до +72 дБ.
- Утопленная ручка управления усилением на передней панели с защитной крышкой
- XLR вход для прямого подключения микрофона
- Кнопка отключения звука для входа микрофона с двойным ЖК индикатором
- Монтаж в устройства, поддерживающие двойные панели AAP
Дополнительная информация
Audio | |||
---|---|---|---|
Gain | Adjustable, +25 dB to + 72 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.1 dB | ||
THD + Noise (with a 10 Hz to 80 kHz bandwidth filter) | 0.03% when input is -48 dBV and output is +4 dBu. 0.14% when input is -60 dBV and output is -10 dBV | ||
S/N | 92 dB at maximum output (unweighted, with a 10 Hz to 80 kHz bandwidth filter) | ||
CMRR | >70 dB @ 20 Hz to 20 kHz | ||
Low cut filter | 75 Hz (18 dB per octave) | ||
Equivalent input noise | <126 dBV (unweighted, with a 10 Hz to 80 kHz bandwidth filter) | ||
Audio input | |||
Number/signal type | 1 mono, balanced | ||
Connectors | |||
MP 101 | (1) 3.5 mm captive screw connector, 3 pole | ||
MP 101 AAP, MP 101 D | 1 female 3-pin XLR | ||
Impedance | 2k ohm balanced | ||
Nominal level | -60 dBV or -48 dBV | ||
Maximum level | -1.5 dBu, (balanced) at 1% THD+N | ||
| |||
Audio output | |||
Number/signal type | 1 mono, balanced | ||
Connectors | (1) 3.5 mm captive screw connector, 3 pole | ||
Impedance | <150 ohms balanced | ||
Maximum level (Hi-Z) | >+25 dBu, balanced at 1% THD+N | ||
Maximum level (600 ohm) | >+20 dBu, balanced at 1% THD+N | ||
Control/remote — preamp | |||
Contact closure | (1) 3.5 mm captive screw connector, 3 pole | ||
Contact closure pin configuration | Pin 1 = +10 VDC, 2 = volume/mute (variable voltage), 3 = GND | ||
Volume control voltage range | 0 V (mute) to 10 V (maximum volume) | ||
Extron remote key pad control | (1) 3.5 mm captive screw connector, 3 pole | ||
General | |||
External power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated | ||
Power input requirements | 12 VDC, 0.3 A | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Convection, no vents | ||
Mounting | |||
Rack mount | |||
MP 101 | Yes, with optional 1U rack shelf or back of the rack mounting kit | ||
MP 101 AAP | Yes, with optional faceplate or frame | ||
Enclosure type | Metal | ||
Enclosure dimensions | |||
Faceplate | 1.4" H x 3.5" W x 0.1" D (3.5 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) | ||
Device | 1.1" H x 2.75" W x 1.8" D (2.8 cm H x 7.0 cm W x 4.6 cm D) (Depth excludes connectors.) | ||
Product weight | 0.3 lbs (0.1 kg) | ||
Shipping weight | 2 lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Warranty | 3 years parts and labor |