AMX NX-1200

• IPv6 and wired 802.1x – Supports modern networking standards for internet protocol IPv6 and port-based Network Access Control utilizing X.509 certificates for access to protected networks
• High Performance Architecture, Flexible Programming Platform (RPM, NetLinx and Java) – Easily scalable to support a wide range of applications for today and tomorrow
• Full Line Compatible (Backwards and Cross-Compatibility) – Standardized port numbers and new configuration import/export tools mean fewer coding changes
• Enhanced Diagnostics On Serial and IR Ports – Provides real time error feedback when Serial and IR ports are disconnected or improperly wired
• File Import / Export From USB Drive – Backup and restore configuration data, program files, and update firmware from a standard USB flash drive
• Hardware / Software Built for 24/7/365 Operation – Provides outstanding reliability and improved diagnostics
• Ultra-Fast 1600 MIPS processor
• 512 MB Onboard RAM
• 1 M Non-Volatile Memory
• 4 GB SDHC FLASH Memory
• 1 RU x 1/3 Rack Space
• 1 AXLink Interface
• 1 10/100 LAN Interface
• 4 Digital I/O Ports
• 1 RS232/422/485 Port
• 1 RS232-Only Port
• 2 IR/Serial Output Ports
• 1 IR Receive Port

Размеры (HWD) 

• 1 11/16” x 5 13/16” x 5 1/8” (42.16 mm x 147.32 mm x 130.81 mm)

Вес

• 0.726 Kg

Питание

• Voltage, DC (Typical): 12 VDC
• DC Current Draw: 200 mA @ 12 VDC
• Voltage DC Range: 9 - 18 VDC
• Power Connector: 3.5mm Phoenix with retaining screws

Потребление

• Active Power Consumption: 3 W

Окружающая среда

• Temperature (Operating): 32° F to 122° F (0° C to 50° C)
• Temperature (Storage): 14° F to 140° F (-10° C to 60°C)
• Humidity (Operating): 5% to 85% RH
• Heat Dissipation (Typical): 10.2 BTU/hr

 Процессор

• Processor: 1600 MIPSM
• Program Port: (1) USB Standard B
• Configuration Dip Switch: 4-position
• Status Indicator: Status LED (green) blinks to indicate that the system is programmed and communicating properly
• Input Indicator: Input LED (yellow) blinks to indicate that the Controller is receiving data
• Output Indicator: Output LED (red) blinks to indicate that the Controller is transmitting data
• ID Pushbutton: Black ID pushbutton for setting IP mode and reverting to default configuration and firmware
• USB Host Port: (1) USB Standard A, USB Host port supports Solid State drive for upgrading firmware, loading code files, copying configuration data and remote storage

 Память

• NVRAM: 1 MB
• Memory Card: 4 GB SD
• DDRAM: 512 MB
• Note: Supports external USB Solid State Drives

Подключение Ethrnet

• Connection: (1) RJ-45
• Description: 10/100 Port RJ-45 connector provides TCP/IP communication. Auto MDI/MDI-X enabled. Supports IPv4 and IPv6 networks. Supports HTTP, HTTPS, Telnet, FTP
• Link/Act Indicator: Link/Activity LED (green) blinks when receiving Ethernet data packets, one on Ethernet RJ-45 connector and one on the front panel
• Speed Indicator: Speed LED (yellow) lights On when the connection speed is 100 Mbps Ethernet connection and turns OFF when the speed is 10 Mbps

Порты управления и индикаторы

• AxLink Port: (1) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices
• AxLink Indicator: (1) AxLink LED (green) indicates the state of the AxLink port
• RS-232/422/485 Port:
• (1) 10-position 3.5mm Screw Terminal
• NetLinx Port 1
• XON/XOFF (transmit on / transmit off)
• CTS/RTS (clear to send/ready to send)
• 300 - 115,200 baud
• RS-232 Port:
• (1) 5-position 3.5mm Screw Terminal
• NetLinx Port 2
• XON/XOFF (transmit on / transmit off)
• CTS/RTS (clear to send/ready to send)
• 300 - 115,200 baud
• Serial Indicator: (2) sets of LEDs (red/yellow) indicate when serial Ports 1 and 2 are transmitting and receiving data
• IR/Serial:
• (2) 2-position 3.5mm Screw Terminal
• 2 IR Transmit / 1-way Serial ports
• NetLinx Ports 11-12
• Support high-frequency carriers up to 1.142 MHz
• 2 IR/Serial data signals can be generated simultaneously
• IR/Serial Indicators: (2) LEDs (red) indicate when each of the IR/Serial ports (11-12) are transmitting control data
• I/O Channels:
• (4) One 6-position 3.5mm Screw Terminal
• 4-channel binary I/O port for contact closure with each input being capable of voltage sensing
• NetLinx Port 22
• Channels 1-4
• I/O Indicator: (4) LEDs (yellow) indicate each of the I/O channels (1-4) are active
• IR/RX Ports: (1) 1/8” mini-jack
• IR/RX Indicator: (1) IR RX LED (red) LED lights when IR data is being received via the IR/RX port

Описание

• Enclosure: Metal with black matte finish
• Regulatory Compliance:
• FCC CFR Title 47 Part 15
• CE EN 55022
• CE EN 55024
• CE EN 60950-1
• IEC 60950-1
• UL 60950-1
• C-Tick CISPR 22
• IC CISPR 22
• VCCI CISPR 22
• RoHS
• WEEE
• Included Accessories:
• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-0002-SA)
• 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
• 10-pin 3.5mm mini-Phoenix female RS232/422/485 connectors (41-5107)
• 5-pin 3.5mm mini-Phoenix female RS232 connectors (41-0336)
• 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
• (2) CC-NIRC IR Emitters
• Optional Accessories:
• AVB-VSTYLE-RMK, V Style Module Rack Mounting Tray, 5 1/4" Depth (FG1010-720)
• AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount Brackets (FG1010-722)
• PSN6.5, 6.5 A Power Supply (FG423-41)
• PSR4.4, 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector with Retention Screws (FG423-46)
• PSN4.4, Power Supply, 4.4 A, 3.5 mm Phoenix, 13.5 VDC (Discontinued) (FG423-45)
• CC-USB-NI, USB Programming Cable (FG10-2105)
• CC-NIRC, IR Cables (FG10-000-11)
• CC-NET, Cat5 Ethernet Cable (FG10-051-10)
• CBL-ETH-FL, Ethernet Cat5e Flat Cable (FG10-2182-16)
• EXB-IRS4, ICSLan IR/S Interface, 4 IR/S and 4 Inputs (FG2100-23)
• EXB-COM2, ICSLan Serial Interface, 2 Ports (FG2100-22)
• EXB-REL8, ICSLan Relay Interface, 8 Channels (FG2100-20)
• EXB-I/O8, ICSLan Input/Output Interface, 8 Channels (FG2100-21)
• EXB-MP1, ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1 IR RX (FG2100-26)