AMX MVP-WDS-9-GB

DIMENSIONS (HWD) 
9 3/4" x 12 1/2" x 2 1/8" (24.8 cm x 31.8 cm x 5.4 cm)
Note: Always use the cutout/installation dimensions for the MVP-WDS-9 when installing this unit into various surfaces.

WEIGHT

• Without back box: 1.50 lbs (680 g)
• With back box: 2.40 lbs (1090 g)

POWER REQUIREMENTS 
30 W (Class II listed power supplemented), supplied via the PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant.

STARTUP POWER REQUIREMENTS

• Cradle and panel (not charging): 16 W
• Cradle and panel (charging): 23 W
• Ejection: 23 W

FRONT PANEL COMPONENTS

• Securing Magnets: Secures MVP touch panel during ejection.
• Security Latch: Adds the primary layer of security when mounting an MVP touch panel. When the device is inserted, this latch grabs onto the rear of the touch panel and secures it to prevent it from inadvertently being removed.
• Interface Connector: A set of contacts that connect to the underside MVP connector strip. This connection provides both communication and power between the touch panel and the MVP-WDS-9.
• Support Cradle: This retractable mechanism supports a resting MVP panel and allows a user to either insert or remove a connected MVP panel.
• Security Release pushbutton: Located on the front of the unit, this pushbutton toggles an on-screen security keypad if security is enabled.
• Entering the correct release code allows the MVP-WDS-9 to release the touch panel from the security latch.

OPERATING/STORAGE ENVIRONMENTS

• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% to 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% to 85% RH

INCLUDED ACCESSORIES

• MVP-WDS-9 Wall Docking Station Installation Guide (93-5967-12)
• Snap-On Ferrite (04-0007)
• MVP-WDS-9 Wall Docking Station Template (68-5967-01)
• PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant (FG423-84)