Описание товара
Подробности
Презентационных матричный коммутатор MPX 866 A, объединяет в себе три коммутатора в компактном корпусе: коммутатор 8x6 VGA; коммутатор 6x6 composite video и S-video; и аудио-коммутатор 14x6. MPX 866 A обеспечивает вывод сигнала VGA, S-video и композитного видео на практически любой проектор или дисплей. Для обеспечения упрщения маршрутизации, MPX 866 A может кодировать и декодировать между S-video и композитным видео. Этот коммутатор идеально подходит как решение из коробки для построения презентационной системы или мультирумных инсталляция, где требуется инсталяция множества дисплеев и несколько вариантов конфигурации.
Video | |
---|---|
Routing | |
RGB/VGA | 8 x 6 matrix |
S-video/composite video | 6 x 6 matrix |
Gain | Unity |
Bandwidth | |
RGB/VGA | 300 MHz (-3 dB), fully loaded |
S-video/composite video | 150 MHz (-3 dB), fully loaded |
0 - 10 MHz | No more than +0.1 dB to -0.1 dB |
0 - 30 MHz | No more than +0.1 dB to -0.5 dB |
Differential phase error | 1.0° at 3.58 MHz and 4.43 MHz |
Differential gain error | 1.0% at 3.58 MHz and 4.43 MHz |
Crosstalk | |
RGB/VGA | <-50 dB @ 10 MHz, <-30 dB @ 100 MHz |
S-video/composite video | -50 dB @ 5 MHz |
Switching speed | 100 ms (max.) |
Video input | |||
---|---|---|---|
Number/signal type | |||
RGB/VGA | 8 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, component video | ||
S-video/composite video | Up to 4 S-video and 2 composite video or 6 composite video | ||
Connectors | |||
RGB/VGA | 8 female 15-pin HD | ||
S-video/composite video | 4 x 2 female BNC for S-video or composite video (inputs 11 to 14) and 2 x 1 female BNC for composite video or genlock only (inputs 9 and 10) | ||
Nominal level | 1 Vp-p for Y of component video or S-video and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video | ||
Minimum/maximum levels | |||
RGB/VGA | Analog: 0.3 V to 1.5 Vp-p with no offset | ||
S-video/composite video | Analog: 0.5 V to 2.0 Vp-p with no offset | ||
Impedance | 75 ohms | ||
Return loss | |||
RGB/VGA | <-40 dB @ 5 MHz | ||
S-video/composite video | <-30 dB @ 5 MHz | ||
DC offset (max. allowable, S-video or composite video) | 1.5 V | ||
External sync (genlock, S-video or composite video) | 0.3 V to 0.4 Vp-p | ||
Video output | |||
Number/signal type | |||
RGB/VGA | 6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, (follows input type) | ||
S-video/composite video | 2 S-video, 2 S-video or composite video, and 2 composite video | ||
Connectors | |||
RGB/VGA | 6 female 15-pin HD | ||
S-video/composite video | 2 x 2 female BNC for S-video only (outputs 9 and 10) 2 x 2 female BNC for S-video or composite video pass-through (outputs 11 and 12) 2 x 1 female BNC for composite video only (outputs 7 and 8) | ||
Nominal level | 1 Vp-p for Y of component video or S-video and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video | ||
Minimum/maximum levels | |||
RGB/VGA | Analog: 0.3 V to 1.5 Vp-p with no offset (follows input) | ||
S-video/composite video | Analog: 0.0 V to 2.0 Vp-p with no offset | ||
Impedance | 75 ohms | ||
Return loss | |||
RGB/VGA | -40 dB @ 5 MHz | ||
S-video/composite video | -30 dB @ 5 MHz | ||
DC offset | |||
S-video/composite video | ±5 mV with input at 0 offset | ||
VGA | ±10 mV with input at 0 offset | ||
Switching type | |||
RGB/VGA | Triple-Action | ||
S-video/composite video | Vertical interval | ||
Sync | |||
Input type (VGA group) | RGBHV, RGBS, RGsB, RsGsBs | ||
Output type (VGA group) | RGBHV, RGBS, RGsB, RsGsBs (follows input) | ||
Horizontal frequency (RGB) | 15 kHz to 145 kHz | ||
Vertical frequency (RGB) | 30 Hz to 170 Hz | ||
Genlock connector | 1 BNC female (video input 9) | ||
Standards (S-video and composite video groups) | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
Input level | 1.9 V to 5.0 Vp-p | ||
Output level | TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS | ||
Input impedance | 510 ohms | ||
Output impedance | 75 ohms | ||
Max. input voltage | 5.0 Vp-p | ||
Max. propagation delay | <65 ns | ||
Polarity | Positive or negative (follows input) | ||
Audio | |||
Routing | 14 x 6 stereo switching matrix 4 x 6 microphone mixing matrix | ||
Gain | Unbalanced output: -6 dB; balanced output: 0 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.15 dB | ||
THD + Noise | 0.01% @ 1 kHz at nominal level | ||
S/N | >105 dB, balanced, at maximum output (21 dBu) (unweighted) | ||
Crosstalk | <-90 dB @ 1 kHz, fully loaded | ||
Stereo channel separation | >96 dB @ 1 kHz | ||
CMRR | >70 dB @ 1 kHz | ||
Volume range | -100 dB to 0 dB (volume numbers 0 to 64 in 1.0 dB steps, except from step 0 to 1, which is a 37 dB step) | ||
| |||
Audio input | |||
Number/signal type | 14 stereo or mono, balanced/unbalanced | ||
Connectors | (14) 3.5 mm captive screw connectors, 5 pole | ||
Impedance | >11.5k ohms unbalanced, 22k ohms balanced, DC coupled | ||
Nominal level | +4 dBu (1.23 Vrms) | ||
Maximum level | +24 dBu at 1% THD+N | ||
Input gain adjustment | –18 dB to +24 dB, adjustable per input by RS-232, Ethernet, or front panel | ||
| |||
Mic/line input | |||
Number/signal type | 4 balanced/unbalanced | ||
Connectors | (4) 3.5 mm captive screw connectors, 3 pole | ||
Impedance | >2.5k ohms unbalanced, >5.0k ohms balanced | ||
Nominal level | -60 dBV (1 mVrms) when Mic gain is set to +40 dB | ||
Equivalent input noise | <-120 dBV (1.0 µVrms) when Mic gain is set to +40 dB | ||
Maximum level | +12 dBV (2 Vrms) at 1% THD+N when Mic gain is set to 0 dB | ||
Input gain adjustment | 0 dB to +80 dB, adjustable per input | ||
Mic DC power | +48 VDC (can be switched on or off) | ||
Audio output | |||
Number/signal type | 6 stereo or mono, balanced/unbalanced | ||
Connectors | (6) 3.5 mm captive screw connectors, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Gain error | ±0.10 dB channel to channel | ||
Maximum level (Hi-Z) | >+21 dBu, balanced; or +15 dBu, unbalanced at 1% THD+N | ||
Control/remote — switcher | |||
Serial host control port | (2) RS-232: 2 rear panel 3.5 mm captive screw connectors, 3 pole; 1 front panel 2.5 mm stereo mini jack (Either this or the rear panel secondary port is active, not both at the same time.) | ||
Baud rate and protocol | 9600 baud; 8 data bits, 1 stop bit, no parity | ||
Serial control pin configurations | Captive screw connectors: 1 = TX, 2 = RX, 3 = GND Mini stereo jack: tip = TX, ring = RX, sleeve = GND | ||
Ethernet host control port | 1 RJ-45 female connector | ||
Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
Ethernet protocol | ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP | ||
Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off | ||
Web server | Up to 200 simultaneous sessions 7.25 MB nonvolatile user memory | ||
Program control | Extron's control/configuration program for Windows® Extron's Simple Instruction Set (SIS™) Microsoft® Internet Explorer ver. 6 or higher, Telnet | ||
General | |||
Power | 100 VAC to 240 VAC, 50/60 Hz, 48 watts, internal | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Convection, vents on left and right sides | ||
Mounting | |||
Rack mount | Yes | ||
Enclosure type | Metal | ||
Enclosure dimensions | 3.5" H x 17.0" W x 9.4" D (2U high, full rack wide) (8.9 cm H x 43.2 cm W x 23.9 cm D) (Depth excludes connectors. Width excludes rack ears.) | ||
Product weight | 15 lbs (6.8 kg) | ||
Shipping weight | 25 lbs (12 kg) | ||
DIM weight | TBD | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, CUL, UL | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
Warranty | 3 years parts and labor | ||
| |||
|
Дополнительная информация
:
Технические характеристики | Не применимо |
---|---|
Артикул | 60-796-01 |