Описание товара
Подробности
-
Дополнительная информация
VSW 2VGA A | |||
Video | |||
---|---|---|---|
Gain | Unity | ||
Bandwidth | 300 MHz (-3 dB) | ||
Video input and loop through | |||
Number/signal type | 2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* input 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video* local monitor loop-through | ||
| |||
Connectors | 3 female 15-pin HD | ||
Pin connections | ID bits on pins 4, 11, 12, 15 from inputs 1 and 2: passed to main output Pin 9 of input 1: floating Pin 9 of input 2: used for the Show-Me feature | ||
Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video | ||
Minimum/maximum levels | Analog: 0.4 V to 1.8 Vp-p with no offset | ||
Impedance | 75 ohms | ||
Horizontal frequency | 15 kHz to 145 kHz | ||
Vertical frequency | 30 Hz to 170 Hz | ||
Video output | |||
Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* (follows input type) | ||
Connectors | 1 female 15-pin HD | ||
Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video | ||
Minimum/maximum levels | 0.4 V to 1.8 Vp-p (follows input) | ||
Impedance | 75 ohms | ||
| |||
Sync | |||
Input type | RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync | ||
Output type | RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync (follows input) | ||
Input level | 1.8 V to 5.0 Vp-p | ||
Output level | TTL: 5.0 V p-p, unterminated | ||
Input impedance | 510 ohms | ||
Output impedance | 50 ohms | ||
Max. input voltage | 5.0 Vp-p | ||
Max. rise/fall time | 40 ns | ||
Polarity | Positive or negative (follows input) | ||
Audio | |||
Gain | Unbalanced output: 0 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
THD + Noise | 0.002% @ 1 kHz at nominal level (-10 dBV) | ||
S/N | 94 dB at maximum output (unweighted) | ||
Crosstalk | -50 dB @ 20 kHz, -75 dB @ 1 kHz and below 60 Hz | ||
Stereo channel separation | 96 dB @ 1 kHz | ||
Audio input | |||
Number/signal type | 2 stereo, unbalanced | ||
Connectors | (2) 3.5 mm mini audio jacks (tip, ring, sleeve) | ||
Impedance | 22k ohms unbalanced, AC coupled | ||
Nominal level | -10 dBV (316 mVrms) | ||
Maximum level | +9 dBV, (unbalanced) at 1% THD+N | ||
| |||
Audio output | |||
Number/signal type | 1 stereo, unbalanced | ||
Connectors | (1) 3.5 mm mini audio jack (tip, ring, sleeve) | ||
Impedance | 50 ohms unbalanced | ||
Gain error | ±0.1 dB channel to channel | ||
Maximum level (Hi-Z) | >+9 dBV, unbalanced at 1% THD+N | ||
Maximum level (600 ohm) | >+7 dBV, unbalanced at 1% THD+N | ||
Control/remote — switcher | |||
Contact closure | (1) 3.5 mm captive screw connector, 3 pole for momentary contact | ||
Contact closure pin configurations | 1 = input 1 select, 2 = input 2 select, 3 = GND Shorting all three pins together enables autoswitch mode. | ||
Loop signal | Momentary low, 250 µs | ||
General | |||
External power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A (max.), regulated | ||
Power input requirements | 12 VDC, 0.1 A | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Convection, no vents | ||
Mounting | |||
Rack mount | Yes, with optional 1U rack shelf | ||
Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit | ||
Pole mount | Yes, with optional pole mount kit | ||
Enclosure type | Metal | ||
Enclosure dimensions | 1.0" H x 4.3" W x 3.0" D (quarter rack wide) 2.5 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) | ||
Product weight | 0.5 lb (0.3 kg) | ||
Shipping weight | 3 lbs (2 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Listings | CE, c-UL, UL | ||
Compliances | CE, C-tick, FCC Class A, ICES, VCCI | ||
Warranty | 3 years parts and labor | ||
| |||
|