Описание товара
Подробности
The PowerCage™ FOX HDMI Fiber Optic Extender is a modular board-designed transmitter and receiver set for the PowerCage 1600 enclosure that provides long haul transmission of HDCP-compliant HDMI, stereo audio, and RS-232 control signals over fiber optic cabling. Engineered for reliability and exceptional high resolution image performance, it uses Extron all digital technology to deliver perfect pixel-for-pixel transmission of HDMI computer-video images up to WUXGA 1920x1200 resolution, including HDTV 1080p/60. The PowerCage FOX HDMI also includes many integrator-friendly features such as Key Minder®, EDID Minder®, Auto Input Memory, audio embedding/de-embedding, audio gain and attenuation, internal test patterns, and real-time system monitoring.
- Accepts fiber optic signals from a FOX Series transmitter and provides HDMI video, stereo audio, and RS-232 control signals
- HDCP compliant
- All-digital technology provides pixel-for-pixel performance with signals up to 1920x1200, including HDTV 1080p/60
- Integrates easily into a wide range of 4K environments
- Key Minder® continuously verifies HDCP compliance for quick, reliable switching
Дополнительная информация
| PowerCage™ FOX Rx HDMI | |
| Optical fiber interconnection between transmitter and receiver | |
|---|---|
| Number/type | 1 singlemode or 1 multimode fiber optic input and output per FOX board |
| Connectors | 2 bidirectional LC connectors per FOX board |
| Operating distance | |
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a SM board |
| Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board 1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized MM cable and a MM board |
| Nominal peak wavelength | 850 nm for multimode (MM), 1310 nm for singlemode (SM) |
| Transmission power, singlemode or multimode | -5 dBm, typical |
| Maximum receiver sensitivity | |
| Singlemode | -18 dBm, typical |
| Multimode | -12 dBm, typical |
| Optical loss budget | |
| Singlemode | 13 dB, maximum |
| Multimode | 7 dB, maximum |
| Maximum channel data rate | 4.25 Gbps |
| Video | |
| Maximum data rate | 4.25 Gbps |
| Maximum pixel clock | 165 MHz |
| Resolution range | 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i, 1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled |
| Formats | RGB and YCbCr digital video |
| Standards | DVI 1.0, HDMI, HDCP 1.1, CEA-861E |
| Video output | |
| Number/signal type | 1 single link HDMI |
| Connectors | 1 female 19-pin HDMI type A |
| Audio | |
| Gain | |
| Range | Adjustable, -18 dB to +10 dB |
| Default | Unbalanced output: -6 dB; balanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | 0.10% @ 1 kHz at nominal level |
| S/N | >80 dB at maximum output (unweighted) |
| CMRR | 65 dB @ 20 Hz to 20 kHz |
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) |
| Sampling rate | 48 kHz |
| Audio output | |
| Number/signal type | 1 stereo, balanced/unbalanced or 2 mono, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level (Hi-Z) | >+11.0 dBu, balanced at 1% THD+N |
| Maximum level (600 ohm) | >+10.0 dBu, balanced at 1% THD+N |
| Audio delay | 1.5 frames |
| Control/remote | |
| Serial control ports | |
| Control | 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port) |
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles, "RS-232 Over Fiber") |
| Baud rate and protocol | |
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Pass-through | 9600 to 115,200 baud |
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND |
| Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
| General | |
| Power | Supplied by a PowerCage 1600 enclosure |
| Power consumption | 6.02 watts |
| Power input requirements | 12 VDC, 1.0 A, supplied by the PowerCage enclosure |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Enclosure: fans, front to back Boards: convection, within the PowerCage enclosure |
| Thermal dissipation | 27.6 BTU/hr |
| Dimensions | Each board fits a double slot opening in a PowerCage enclosure. |
| Product weight | 1.1 lbs (0.5 kg) |
| Shipping weight | 2 lbs (1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. |
| Warranty | 3 years parts and labor |
