+7 (916) 0-100-600

Тел: +7 (916) 0-100-600



Extron DTP T DP 4K 330

Передатчик DTP для DisplayPort по экран/ированной витой паре до 100 метров
Артикул (SKU): 60-1076-53


Наличие: Заказ 30-40 дней

69 120,00 руб.
69 120,00 руб.
Extron

Только безналичный расчет, НДС 0%. Цену теперь надо перепроверять перед заказом

Мы продолжаем привозить оборудование, соблюдаем сроки от 2 до 8 недель

Более 10 000 товаров от 30 производителей

Торопитесь, дверца постепенно закрывается

В новых обстоятельствах, поставка только на заказ, требуется предоплата

Описание товара

Подробности

Передатчик сигнала DisplayPort, аудио и RS‑232 и ИК на расстояние до 70 метров устройствам Extron с поддержкой DTP® по одному экранированному кабелю CATx. Он предлагает экономичный и эффективный способ интегрирования сигналов высокого разрешения DisplayPort с эмбедированным аудио в системы на базе DTP Systems. Дополнительно, DTP T DP 4K 230 принимает сигналы аналогового стереоаудио для одновременной передачи по тому же экранированному кабелю витой пары. Передатчик поддерживает видеосигналы с разрешениями до 4K, в том числе 2560x1600. Благодаря компактному размеру корпуса и возможности удалённого питания DTP T DP 4K 230 является идеальным решением для незаметной установки на кафедрах, под столами или в любых других местах в соответствии с требованиями проекта.

  • Передаёт DisplayPort с сигналами управления и аналоговым аудио на 70 метров по экранированному кабелю CATx
  • Поддержка компьютерных и видеоразрешений до 4K
  • Совместим с экранированным кабелем витой пары типа CATx
  • Настоятельно рекомендуется использовать кабель экранированной витой пары Extron XTP DTP 24 для оптимального функционирования системы
  • Принимает дополнительное аналоговое стереоаудио
  • Сквозной канал для двунаправленных сигналов RS‑232 и ИК для управления AV‑устройствами

Дополнительная информация

DTP T/R DP 4K 230
   Frame rate1 24, 25, 30, 50, or 60 fps
   Chroma sampling1 4:4:4, 4:2:2, or 4:2:0
   Color bit depth1 8 bits per color
   Signal type HDMI, DisplayPort, HDCP
   Max. video data rate 10.8 Gbps (2.7 Gbps per lane)
 
 
Video
   Maximum data rate Up to 10.8 Gbps (2.7 Gbps per lane)
   Maximum pixel clock 300 MHz
   Resolution range Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(* reduced blanking)
   Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit
   Formats RGB and YCbCr digital video
   Standard DisplayPort 1.2, HDCP 1.4
    NOTE    Only Single Stream Transport (SST) is supported.
 
Video input — transmitter
   Number/signal type 1 DisplayPort
   Connector 1 female DisplayPort
 
Interconnection between transmitter and receiver
   Signal type DTP 230
   Connector 1 female RJ-45 per unit
   Termination standard TIA/EIA T568B
   Signal transmission distance  
      1080p @ 60 Hz Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
      2560x1600 @ 60 Hz Up to 130' (40 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
      4K/UHD @ 30Hz and 60 Hz Up to 130' (40 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable
   Cable requirements Solid conductor, 24 AWG or better
   Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair)
 
 
Video output — receiver
   Number/signal type 1 DisplayPort
   Connectors 1 female DisplayPort
 
Audio
   Gain Unbalanced output: 0 dB; balanced output +6 dB
   Frequency response 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output
   S/N >90 dB, at maximum input (unweighted)
   Stereo channel separation >80 dB
   Digital sampling 48 kHz
   Bit depth 16 bit
 
Audio input
   Signal type  
      Analog audio (over DTP) Stereo (2 channel), balanced/unbalanced
 
      Digital audio Embedded digital audio on DTP signal
      Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS Digital Surround 5.1, DTSES Matrix 6.1, DTS-ES Discrete 6.1
   Connector (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
   Impedance >10k ohms, DC coupled
   Nominal level -10 dBV (316 mVrms)
   Maximum level +7 dBV (unbalanced)
    NOTE    0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
 
Audio output
   Signal type  
      Analog audio (over DTP) Stereo (2 channel), balanced/unbalanced
 
      Digital audio Embedded digital audio on DTP signal
      Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS Digital Surround 5.1, DTSES Matrix 6.1, DTS-ES Discrete 6.1
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.2 dB channel to channel
   Maximum level (600 ohm) >+14 dBu, balanced
   Connectors  
      Digital audio Female DisplayPort
      Analog audio (1) 3.5 mm captive screw connector, 5 pole
 
Communication — external device (pass-through, unidirectional or bidirectional)
   Serial control port input/output  
      Transmitter RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port)
      Receiver 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input  
      Transmitter 1 set of proprietary signals on a female RJ-45 jack
      Receiver RS-232 via a 3.5 mm, 3 pole captive screw connector
   Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
   Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd
   IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
   IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
 
General
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power consumption  
      Transmitter  
         Device 8.7 watts, 12 VDC
         Device and power supply 10.3 watts, 100-240 VAC, 50-60 Hz
      Receiver  
         Device 8.8 watts, 12 VDC
         Device and power supply 11.0 watts, 100-240 VAC, 50-60 Hz
 
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Thermal dissipation  
      Transmitter  
         Device 11.1 BTU/hr
         Device and power supply 16.8 BTU/hr
      Receiver  
         Device 18.1 BTU/hr
         Device and power supply 25.4 BTU/hr
   Mounting
      Rack mount Yes, with optional 1U high rack shelf
      Furniture mount Yes, with optional under-desk mounting kit
   Enclosure type Metal
   Enclosure dimensions  
      Transmitter 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
      Receiver 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight  
      Transmitter 0.5 lbs (0.3 kg)
      Receiver 1.0 lb (0.5 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance  
      Safety CE, c-UL, UL
      EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
   Warranty 3 years parts and labor

Отзывы

Напишите ваш собственный отзыв

Ваш отзыв для: Extron DTP T DP 4K 330

Как вы оцениваете этот товар? *

 1 звезда2 звезды3 звезды4 звезды5 звёзд
Качество
Цена

Вы возможно также заинтересованы в следующих товарах

Extron DTP R DP 4K 230

Extron DTP R DP 4K 230

69 120,00 руб.