+7 (916) 0-100-600

Тел: +7 (916) 0-100-600



Extron IPCP Pro 350

Процессор управления IP Link Pro
Артикул (SKU): 60-1417-01
Цена по запросу
Extron

Только безналичный расчет, НДС 0%. Цену теперь надо перепроверять перед заказом

Мы продолжаем привозить оборудование, соблюдаем сроки от 2 до 8 недель

Более 10 000 товаров от 30 производителей

Торопитесь, дверца постепенно закрывается

В новых обстоятельствах, поставка только на заказ, требуется предоплата

Описание товара

Подробности

Многофункциональный, высокопроизводительный процессор управления, разработанный для централизованного управления AV-системой в проектах среднего масштаба. Являясь частью серии IP Link® Pro, IPCP Pro 350 создан стать ещё быстрее и ещё надёжнее во всех отношениях. Устройство поддерживает стандарты повышенной безопасности и технологию Gigabit Ethernet, что обеспечивает совместимость с различными сенсорными панелями серии TouchLink® Pro при использовании современной сетевой инфраструктуры. Он также поддерживает лицензию Extron LinkLicense™, которая позволяет использовать устройства сторонних производителей в качестве главных интерфейсов управления. IPCP Pro 350 является самым оптимальным выбором для управления несколькими устройствами и типами сигналов в пределах AV-системы.

Дополнительная информация

Memory
   SDRAM 512 MB
   Flash 4.5 GB
 
Software and control options
   Software Extron Global Configurator Plus and Professional for Windows®
   Control options GlobalViewer®, Extron Control for iPad and Web, or TouchLink Pro touchpanels
 
Ethernet control
   Network interface controllers (NICs) 1
   Network switch 1 unmanaged 3 port switch
   Connectors 3 female RJ-45 connectors
   Data rate 10/100/1000Base-T, half/full duplex with autodetect
   Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1
 
Serial control
   Quantity/type 1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)
   Connectors (1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 pole
   Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space parity
    NOTE    The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.
   Pin configurations  
      Serial, 5-pole captive screw
         RS-232 (default) Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS
         RS-422 Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+
         RS-485 Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+
      Serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd
 
Digital I/O control
   Quantity/type 4 digital input/output (configurable)
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Digital inputs  
      Input voltage range 0 to 24 VDC, clamped at +30 VDC
      Input impedance 29k ohms
      Programmable pullup 1k ohms to +5 VDC
      Threshold low to high >2.8 VDC
      Threshold high to low <2.0 VDC
   Digital outputs 250 mA sink from 24 VDC max.
   Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd
 
IR/serial control
   Quantity/type 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
   Connector (1) 3.5 mm captive screw connector, 5-pole
   Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space parity
   Pin configurations For each port, pin 1 = signal, 2 = Gnd
   IR output carrier frequency 30 kHz to 300 kHz
   IR learning carrier frequency 30 kHz to 300 kHz
   IR learning capture distance 2" (5.1 cm) to 12" (30.5 cm) from the front panel
 
Relay control
   Quantity/type 4 normally open relays
   Relay control connectors (1) 3.5 mm captive screw connector, 6 pole
   Relay control contact rating 24 VDC, 1 A
 
General
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power input requirements 12 VDC, 1 A, 12 watts, max.
   Power consumption  
      Device 9.8 watts, 12 VDC
      Device and power supply 11.9 watts, 100-240 VAC, 50-60 Hz
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Thermal dissipation  
      Device 12.9 BTU/hr
      Device and power supply 19.9 BTU/hr
   Mounting  
      Rack mount Yes, with optional 1U rack shelf
   Enclosure type Metal
   Enclosure dimensions 1.7" H x 8.7" W x 10.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 26.7 cm D)
(Depth excludes connectors.)
   Product weight 1.4 lbs (0.6 kg)
   Shipping weight 4 lbs (2 kg)
   DIM weight 7 lbs (3 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
UL Listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release; meets UL 60950 for safety.
      EMI/EMC CE, C-tick, FCC Class A, ICES, KCC, VCCI
      Environmental Complies with the appropriate requirements of RoHS, WEEE
   Warranty 3 years parts and labor

Отзывы

Напишите ваш собственный отзыв

Ваш отзыв для: Extron IPCP Pro 350

Как вы оцениваете этот товар? *

 1 звезда2 звезды3 звезды4 звезды5 звёзд
Качество
Цена

Вы возможно также заинтересованы в следующих товарах

Extron IPCP Pro 250

Extron IPCP Pro 250

126 720,00 руб.
Extron IPCP Pro 550

Extron IPCP Pro 550

0,00 руб.