Описание товара
Подробности
Высокопроизводительный матричный коммутаторы HDMI для видеоразрешений и компьютерных разрешений до 4K. Они поддерживают следующие спецификации HDMI: скорость передачи данных до 10,2 Гбит/с, Deep Color до 12 бит, 3D и аудиоформаты HD без потерь. Для надёжного функционирования системы матричные коммутаторы серии DXP HD 4K оснащены такими технологиями Extron, как SpeedSwitch®, EDID Minder® и Key Minder®, а также эквализация HDMI и восстановление качества сигнала на выходах. Кроме того, для удобства интеграции цифровое аудио может быть деэмбедировано из любого входного сигнала и назначено к цифровому или аналоговому стереовыходу. Устройства серии DXP HD 4K, доступные в фиксированных конфигурациях входов/выходов от 4x4 до 16x16, являются идеальным решением для проектов, где требуется надёжная и эффективная коммутация видео- и аудиосигналов HDMI между несколькими источниками и дисплеями.
Дополнительная информация
DXP HD 4K Series | |||
Frame rate1 | 24, 25, 30, 50, or 60 fps | ||
Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:0 | ||
Color bit depth1 | 8, 10, or 12 bits per color | ||
Signal type | HDMI 1.4, HDCP 1.4 | ||
Max. video data rate | 10.2 Gbps (3.4 Gbps per color) | ||
Video | |||
---|---|---|---|
Routing | |||
DXP 88 HD 4K Series | 4 x 4 matrix 8 x 4 matrix 8 x 8 matrix | ||
DXP 1616 HD 4K Series | 16 x 8 matrix 16 x 16 matrix | ||
Maximum data rate | 10.2 Gbps (3.4 Gbps per color) | ||
Maximum pixel clock | 300 MHz | ||
Resolution range | Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz (*2560x1600 with reduced blanking) | ||
Formats | RGB and YCbCr digital video | ||
Standards | DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E | ||
Video input | |||
Number/signal type | |||
DXP 88 HD 4K Series | 4 or 8 HDMI digital video (HDCP compliant) | ||
Connectors | |||
DXP 88 HD 4K Series | 4 or 8 female HDMI type A | ||
Video output | |||
Number/signal type | |||
DXP 88 HD 4K Series | 4 or 8 HDMI digital video (HDCP compliant) | ||
Connectors | |||
DXP 88 HD 4K Series | 4 or 8 female HDMI type A | ||
Audio | |||
Supported formats — Pass through | |||
HDMI connectors | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel | ||
Supported formats — S/PDIF | 2-channel PCM audio or encoded bitstream audio for Dolby® or DTS® multi-channel surround sound | ||
Audio — individual audio groups (HDMI) | |||
Gain | Unbalanced output, -6 dB; balanced output, 0 dB | ||
Frequency response | 20 Hz to 20 kHz, ± 0.2 dB | ||
THD + Noise | |||
DXP 88 HD 4K Series | 0.03% @ 1 kHz at nominal level | ||
S/N | |||
DXP 88 HD 4K Series | >90 dB at maximum output (unweighted) | ||
Crosstalk | |||
DXP 88 HD 4K Series | <-80 dB @ 20 Hz to 20 kHz, fully loaded | ||
Stereo channel separation | >80dB @ 20 Hz to 20 kHz | ||
| |||
Audio output | |||
Number/signal type | |||
DXP 88 HD 4K Series | 4 or 8 HDMI, embedded 2 stereo, balanced or unbalanced 2 S/PDIF | ||
Connectors | |||
DXP 88 HD 4K Series | 4 or 8 female HDMI (2) 3.5 mm captive screw, 5 pole, for stereo 2 female RCA, for SPDIF | ||
Impedance | |||
Stereo audio | 50 ohms unbalanced, 100 ohms balanced | ||
S/PDIF | 75 ohms | ||
Gain error | ±0.1 dB channel to channel | ||
D/A conversion | 24-bit, 192 kHz | ||
Maximum level (Hi-Z) | >+21 dBu, balanced, or +15 dBu, unbalanced | ||
Output volume range | 0 to -100 dB in 1 dB steps | ||
Communications | |||
Serial control port | 1 bidirectional RS-232 | ||
Serial control connector | (1) 3.5 mm captive screw, 3 pole (rear panel) | ||
Baud rate and protocol | 300 to 115200 baud; 7 or 8 data bits; 1 or 2 stop bits; no parity, even, odd, mark, or space parity Defaults: 9600 baud, 8 data bits, 1 stop bit, no parity | ||
Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
USB control port | 1 front panel female USB mini-B | ||
USB standards | USB 2.0, low speed | ||
Ethernet control port | 1 female RJ-45 connector | ||
Ethernet data rate | 10/100Base-T, half/full duplex with autodetect | ||
Ethernet protocol | DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP, ARP, Telnet | ||
Ethernet default settings | Link speed and duplex level: autodetected IP address: 192.168.254.254 Subnet mask: 255.255.0.0 Gateway: 0.0.0.0 DHCP: Off | ||
Web server | Up to 200 simultaneous sessions 40.0 MB nonvolatile user memory | ||
Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®, Telnet | ||
General | |||
Power supply | Internal Input: 100-240 VAC, 50-60 Hz | ||
Power consumption | |||
DXP 88 HD 4K Series | 41 watts | ||
DXP 1616 HD 4K Series | 85 watts | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Fans, air flows from left to right (as viewed from front panel) | ||
Thermal dissipation, full load | |||
DXP 88 HD 4K Series | |||
115 VAC, 60 Hz | 130 BTU/hr | ||
240 VAC, 50 Hz | 128 BTU/hr | ||
DXP 1616 HD 4K Series | |||
115 VAC, 60 Hz | 266 BTU/hr | ||
240 VAC, 50 Hz | 273 BTU/hr | ||
Mounting | |||
Rack mount | Yes, with included brackets | ||
Enclosure type | Metal | ||
Enclosure dimensions | |||
DXP 88 HD 4K Series | 1.75" H x 17.4" W x [9.5-12.0"] D (1U high, full rack wide) (4.4 cm H x 43.2 cm W x [24.1 - 30.5] cm D) | ||
Product weight | |||
DXP 88 HD 4K Series | 5.2 lbs (2.4 kg) | ||
DXP 1616 HD 4K Series | 8.1 lbs (3.6 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL | ||
Compliances | CE, C-Tick, FCC Class A, ICES, VCCI | ||
Environmental | Complies with the appropriate requirements of RoHS, WEEE. | ||
MTBF | 30,000 hours | ||
Warranty | 3 years parts and labor |