Описание товара
Подробности
The flagship Crestron 2-Series control system processor, featuring numerous built-in control ports, a 3-slot expansion card cage, optional Ethernet, and a full-feature front panel.
- 2-Series engine | Dual-bus architecture
- Compact Flash memory card slot
- Cresnet port - master/slave selectable
- 10/100 Ethernet capable | SSL encryption
- e-Control 2 and RoomView enabled
- SNMP support | Built-in firewall, NAT and router
- 6 Com ports, 8 IR/serial ports, 8 Versiport I/O ports, 8 Relay ports
- 3 Y-Bus / 1 Z-Bus control card expansion slots
- Internal power supply | 2-Space EIA rack-mountable
- Front control panel with LCD display
Дополнительная информация
| Processor | ||
| CPU | 32-bit Freescale ColdFire® Microprocessor | |
| Memory | ||
| SDRAM | 64 MB | |
| NVRAM | 256 KB | |
| Flash | 4 MB | |
| Compact Flash | expandable up to 2 GB (not included) | |
| Operating System | ||
| Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® | ||
| Ethernet | ||
| With C2ENET-1 | 10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications | |
| With C2ENET-2 | All above features plus: built-in firewall, router, and network address translator (NAT) | |
| Y-Bus Connectors & Expansion Slots | ||
| 40 Mb/s parallel communications; Internal backplane for integrated control ports and Y-Bus expansion slots | ||
| COM A - F | (6) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; Ports C-F support C2N-NPA8 Network Poll Accelerator | |
| INFRARED-SERIAL OUTPUT A - H | (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port allowing simultaneous firing of all ports | |
| I/O Versiports 1 - 8 | (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin | |
| RELAY OUTPUT 1 - 8 | (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts | |
| Expansion Slots | (3) Y-Bus expansion slots; Accept all Y-Bus control cards | |
| Z-Bus Expansion Slots | ||
| 300 Mb/s parallel communications; Backplane for Z-Bus expansion slots | ||
| Expansion Slot | (1) Z-Bus expansion slot; Accepts all Z-Bus control cards | |
| Additional Connectors | ||
| COMPUTER | (2) DB9 female; Front and rear panel RS-232 computer console ports | |
| NET | (1) 4-pin 5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator | |
| 100-250V~2.3A 50/60 Hz | (1) IEC Socket; Mates with removable power cord, included | |
| Ground | (1) 6-32 screw, chassis ground lug | |
| Reset Buttons | ||
| HW-R | Hardware reset (reboots the control system) | |
| SW-R | Software reset (restarts the SIMPL program) | |
| Menu Buttons | ||
| FUNCTIONS | (6) Up to 6 dynamically assigned functions based upon current menu | |
| MENU | (1) Returns the LCD display to the MAIN menu | |
| ∧, ∨ | (2) Scroll up or down through any list displayed in the LCD display | |
| BKLT | (1) Toggles through 4 levels of backlight intensity for the LCD display | |
| Refer to the Operations Guide for additional menu functions | ||
| LCD Display | ||
| (2) lines, (40) characters per line; Reverse mode (yellow and black) backlit LCD; Displays system information, configuration menus, and custom programmable user functions | ||
| LED Indicators | ||
| PWR | (1 green) Indicates AC power supplied to unit | |
| NET | (1 yellow) Indicates Cresnet bus activity | |
| MSG | (1 red) Indicates control system has generated an error message | |
| LNK A | (1 red) Indicates a valid connection on LAN port A | |
| ACT A | (1 red) Indicates activity on LAN port A | |
| LNK B | (1 red) Indicates a valid connection on LAN port B | |
| ACT B | (1 red) Indicates activity on LAN port B | |
| COM A - F (TXD, RXD, RTS, CTS) | (24 red) Indicate activity on each respective COM port | |
| IR-SERIAL A - H | (8 red) Indicate activity on each respective IR/Serial port | |
| INPUT-OUTPUT 1 - 8 | (8 red) Indicate activity on each respective I/O Versiport | |
| RELAY 1 - 8 | (8 red) Indicate contact closure at each respective relay port | |
| SLOT 1 - 3 | (3 red) Illuminates to indicate presence of a card in the respective expansion slot; extinguishes momentarily to indicate activity | |
| Power Requirements | ||
| Main Power | 2.3 Amps, 100-250 Volts AC, 50/60 Hz | |
| Available Cresnet Power | 50 Watts (shared with control card expansion slots) | |
| Environmental | ||
| Temperature | 41° to 113°F (5° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Chassis | Steel, black matte powder coat finish | |
| Faceplate | Extruded aluminum, black matte powder coat finish with polycarbonate label overlay | |
| Mounting | Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 3.56 in (9.04 cm); 3.47 (8.81 cm) without feet | |
| Width | 17.03 in (43.26 cm); 19.0 in (48.26 cm) with ears | |
| Depth | 10.36 in (26.31 cm) | |
| Weight | ||
| 8.0 lb (3.62 kg) – with line cord | ||
