+7 (916) 0-100-600

Тел: +7 (916) 0-100-600



Crestron DIN Rail 3-Series® Automation Processor

Система управления - DIN Rail 3-Series Automation Processor
Артикул (SKU): DIN-AP3


Наличие: Заказ 30-40 дней

243 200,00 руб.
243 200,00 руб.
Crestron

Только безналичный расчет, НДС 0%. Цену теперь надо перепроверять перед заказом

Мы продолжаем привозить оборудование, соблюдаем сроки от 2 до 8 недель

Более 10 000 товаров от 30 производителей

Торопитесь, дверца постепенно закрывается

В новых обстоятельствах, поставка только на заказ, требуется предоплата

Описание товара

Подробности

The Crestron® DIN-AP3 is a 3-Series Control System® designed for DIN rail mounting applications. Featuring the 3-Series® control engine, the DIN-AP3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout the facility to make life easier, greener, more productive, and more enjoyable.

Дополнительная информация

Control Engine
 Crestron® 3-Series®; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
Memory
 DDR3 SDRAM256 MB
 Flash4 GB
 Memory Cardsupports SD and SDHC cards up to 32 GB
Communications
 Ethernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP[2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client
 Cresnet®Cresnet master mode
 USBSupports computer console via front panel USB 2.0 device port
 RS-232/422/485For 2-way device control and monitoring, supports RS-232, RS-422, or RS-485 up to 115.2k baud with hardware and software handshaking
 IR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Connectors & Card Slots
 I/O 1 – 8(1) 9-pin 3.5mm detachable terminal block comprising (8) “Versiport” digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;
Programmable 5 Volts, 2k Ohms pull-up resistor per pin
 Ground(1) Captive screw terminal, chassis ground lug
 MEMORY(1) SD memory card slot;
Accepts one SD or SDHC card up to 32 GB for memory expansion
 RELAYS 1 – 4(1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
 COMPUTER(1) USB Type B female;
USB 2.0 computer console port (6 ft cable included);
For setup only
 NET(2) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet master port and 24 Volt DC power input
 COM 1 – 2(2) 5-pin 3.5mm detachable terminal blocks;
Bidirectional RS-232/422/485 ports;
Up to 115.2k baud; hardware and software handshaking support
 IR/SERIAL 1 – 4(1) 8-pin 3.5mm detachable terminal block comprising (4) IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
 LAN(1) 8-wire RJ45 jack;
10Base-T/100Base-TX Ethernet port
Controls & Indicators
 PWR(1) Dual-color green/amber LED, indicates operating power supplied from Cresnet network or power supply, turns amber while booting and green when operating
 NET(1) Amber LED, indicates communication with the Cresnet system
 MSG(1) Red LED, indicates processor has generated an error message
 HW-R(1) Recessed miniature pushbutton for hardware reset
 SW-R(1) Recessed miniature pushbutton for software reset
 LAN(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Power Requirements
 Cresnet Power Usage8 Watts (0.33 Amp @ 24 Volts DC)
Environmental
 Temperature32° to 104°F (0° to 40°C)
 Humidity10% to 90% RH (non-condensing)
 Heat Dissipation26 BTU/Hr
Enclosure
 Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
Dimensions
 Height3.72 in (95 mm)
 Width6.28 in (160 mm)
 Depth2.29 in (59 mm)
Weight
 9.8 oz (277 g)

Отзывы

Напишите ваш собственный отзыв

Ваш отзыв для: Crestron DIN Rail 3-Series® Automation Processor

Как вы оцениваете этот товар? *

 1 звезда2 звезды3 звезды4 звезды5 звёзд
Качество
Цена

Вы возможно также заинтересованы в следующих товарах

Crestron MC3

Crestron MC3

309 760,00 руб.