Описание товара
Подробности
- Интерфейсы с двумя независимыми цепями
- Управление до 128 балластами DALI
- Коммуникация по Cresnet или PoE для установки по одному проводу
- Встроенный блок питания DALI
Дополнительная информация
Connectors | ||
NET | (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet slave port | |
OVERRIDE | (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present, forces each ballast into its defined "System Failure Level"; Minimum Closure Rating: 10mA (per module) at 24 Volts | |
LAN PoE | (1) 8-wire RJ45 with 2 LED indicators; 10BaseT/100BaseTX Ethernet port; 802.3af Power over Ethernet compliant; Green LED indicates link status; Yellow LED indicates Ethernet activity | |
DALI 1, 2 | (2) 2-pin 5mm terminal blocks; Each set of (+) and (-) is paralleled with the adjacent like ports on the same channel; Each channel controls a single DALI loop (up to 64 ballasts); 3kVAC isolation between Cresnet/Ethernet ports; Wire Gauge: 28 AWG to 12 AWG | |
COMPUTER | (1) USB Type B female, USB 1.1 computer console port | |
Controls & Indicators | ||
TEST | (2) Yellow LEDs and (2) miniature pushbuttons for testing on/off and dim up/down for all attached ballasts in channel | |
DALI POWER | (1) 2-position switch, sets DALI power between internal (INT) and external (EXT); When set to "INT" DALI uses power supplied by the DIN-DALI-2; When set to "EXT" DALI uses power provided by external power supply (not included) | |
NET ID | (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID | |
SETUP | (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID | |
OVR | (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets | |
PWR | (1) Green LED, illuminates when DC power is applied to the NET port | |
NET | (1) Yellow LED, indicates communication with the control processor | |
RESET | (1) Recessed miniature pushbutton, resets internal processor | |
Enclosure | ||
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm) | ||
Power Requirements | ||
PoE Power Usage | IEEE 802.3af (802.3at Type 1) Class 0 PoE Powered Device; capable of powering up to 128 DALI ballast controllers | |
Cresnet Power Usage | 9 watts (0.375 Amps @ 24 Volts DC), DALI POWER switch set to "INT"; 2 Watts (0.08 Amps @ 24 Volts DC), DALI POWER switch set to "EXT"; capable of powering up to 128 DALI ballast controllers | |
Note: May be powered by PoE or Cresnet network power. Unit will default to Cresnet power if both are present. | ||
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 44 BTU/hr | |
Dimensions | ||
Height | 3.71 in (94.2 mm) | |
Width | 6.26 in (159 mm) | |
Depth | 2.28 in (58 mm) | |
Weight | ||
9.58 oz (271.5 g) |