Описание товара
Подробности
Системы управления Crestron 3-Series являются основой любого современного дома или офиса. Они объединяют разнородные технологии, обеспечивают управление ими и повышают удобство, эффективность и производительность всех выполняемых действий. Применение систем управления 3-Series позволяет создавать полностью интегрированные решения для управления электропотреблением, уменьшающие расход электроэнергии и эксплуатационные затраты. Благодаря уникальной модульной программной архитектуре, большому объему памяти, надежной работе в сети и IP-управлению системы управления 3-Series обладают значительной вычислительной мощностью и демонстрируют высокую скорость работы.
- Система управления следующего поколения
- Значительно быстрее и мощнее других систем управления
- Уникальная модульная программная архитектура
- Векторный сопроцессор для вычислений с плавающей запятой
- Встроенные 1 ГБ ОЗУ и 4 ГБ флэш-памяти
- Возможность расширения объема хранилища до 1 ТБ
- Гнездо для карт памяти MMC на задней панели
- Высокоскоростной хост-порт USB 2.0
- Control Subnet — обеспечивает подключение к вы деленной локальной сети устройств Crestron®
- Встроенный веб-сервер e-Control®
- Поддержка веб-средств дистанционного управления на основе Core 3 UI™ XPanel
- Поддержка управляющих приложений Crestron Mobile® для iPhone®, iPad® и Android™
- Поддержка удаленного управления с использованием Fusion RV™ и SNMP
- Интегрированная поддержка BACnet®/IP
- Два COM-порта RS-232/422/485 с программным и аппаратным управлением потоком
- Четыре COM-порта RS-232, поддерживающих только программное управление потоком
- Порты ввода-вывода: 8 ИК/последовательных, 8 реле и 8 портов Versiport
- Три слота для плат управления 3-Series™
- Настройка с передней панели, Crestron Toolbox™ или Internet Explorer®
- Обратная совместимость, обеспечивающая выполнение существующих программ для SIMPL
- Полная поддержка Юникода (многоязыковая поддержка)
- Повышенная пропускная способность и защищенность сети
- Обеспечение безопасности при доступе путем интеграции с Active Directory или использования автономных средств управления учетными записями
- Веб-сервер IIS 6.0
- Поддержка IPV6
- Настройка и диагностика с помощью цветного ЖК-дисплея на передней панели
- USB-порт компьютерной консоли на передней панели
- Возможность установки в стойку. (Высота 2U.)
Дополнительная информация
Control Engine | ||
Crestron® 3-Series®; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs | ||
Memory | ||
SDRAM | 1 GB | |
Flash | 4 GB | |
Memory Card | supports SD and SDHC cards up to 32 GB | |
External Storage | supports USB mass storage devices up to 1 TB | |
Communications | ||
Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP[2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client | |
Control Subnet | 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode | |
Cresnet® | Cresnet master mode | |
USB | Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port | |
RS-232/422/485 | For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 | |
IR/Serial | Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
Connectors & Card Slots | ||
S1 – S3 | (3) 3-Series control card expansion slots | |
COM 1 – 2 | (2) 5-pin 3.5mm detachable terminal blocks; Bidirectional RS-232/422/485 ports[3]; Up to 115.2k baud; hardware and software handshaking support | |
COM 3 – 6 | (4) 3-pin 3.5mm detachable terminal blocks; Bidirectional RS-232 ports[3]; Up to 115.2k baud; software handshaking support | |
IR - SERIAL OUTPUT 1 – 8 | (2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
RELAY OUTPUT 1 – 8 | (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts | |
LAN | (1) 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port[3]; Connects to the customer's LAN | |
CONTROL SUBNET | (1) 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port[3]; Provides a dedicated local network for Crestron devices | |
USB | (1) USB Type A female; USB 2.0 port for storage devices | |
MEMORY | (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion | |
I/O 1 – 8 | (1) 9-pin 3.5mm detachable terminal block comprising (8) "Versiport" digital input/output or analog input ports (referenced to GND) [3]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled; Programmable 5 Volts, 2k Ohms pull-up resistor per pin | |
NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices[3]; See "Power Requirements" for additional specifications | |
100-240V~2.4A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included | |
G | (1) 6-32 screw, chassis ground lug | |
COMPUTER (front) | (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only | |
LCD Display | ||
Display Type | TFT active matrix color LCD | |
Size | 2.8 inch (72 mm) diagonal | |
Resolution | 320 x 240 pixels | |
Functions | Displays configuration menus, control port activity, and other system information | |
Controls & Indicators | ||
PWR | (1) Green LED, indicates operating power supplied from AC line | |
NET | (1) Amber LED, indicates communication with the Cresnet system | |
MSG | (1) Red LED, indicates control system has generated an error message | |
HW-R | (1) Recessed pushbutton for hardware reset | |
SW-R | (1) Recessed pushbutton for software reset | |
CNPS FAULT | (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication | |
SLOT 1 – 3 | (3) Green LEDs, indicate control cards are inserted in the corresponding slots | |
Nav Pad | (1) 5-way navigation pad for menu navigation and parameter adjustment | |
HOME | (1) pushbutton, returns to the home menu | |
BACK | (1) pushbutton, steps menu back one level | |
LAN (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity | |
CONTROL SUBNET (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity | |
Power Requirements | ||
Main Power | 2.4 Amps @ 100-240 Volts AC, 50/60 Hz | |
Available Cresnet Power | 75 Watts (3.125 Amps @ 24 Volts DC) | |
Environmental | ||
Temperature | 41° to 113°F (5° to 45°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 45 BTU/Hr with no Cresnet devices, no control cards; 71 BTU/Hr with full Cresnet load, no control cards; See individual control card spec sheets for additional specifications | |
Enclosure | ||
Chassis | Metal, black finish, vented top and sides | |
Faceplate | Extruded metal, black finish, polycarbonate label overlay | |
Mounting | Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) | |
Dimensions | ||
Height | 3.47 in (89 mm) without feet | |
Width | 17.28 in (439 mm), 19.00 in (483 mm) with rack ears | |
Depth | 10.13 in (258 mm) | |
Weight | ||
5.0 lb (2.3 kg) |