Product | Specifications |
Chassis Compatibility | • Cisco 6503, 6503-E, 6404-E, 6506, 6506-E, 6509, 6509-E, 6509-NEB, 6509-NEB-A, 6513 • Cisco 7603, 7606, OSR-7609, 7609, 7613 |
Fan Tray and Power Supply Required | • High speed fan • 2500W AC or DC |
Slot Requirements | Occupies the switch fabric slots in the chassis: • 3-slot chassis: slots 1 and 2 • 4-slot chassis: slots 1 and 2 • 6-slot chassis: slots 5 and 6 • 9-slot chassis: slots 5 and 6 • 13-slot chassis: slots 7 and 8 |
Software Compatibility | • Catalyst 6500 Series • CatOS • WS-Sup720: 8.1(1) and higher • WS-Sup720-3B: 8.3(2) and higher • WS-Sup720-3BXL: 8.3(2) and higher • Native • WS-SUP720: 12.2(14)SX and higher • WS-Sup720-3B: 12.2(17d)SXB1 and higher • WS-Sup720-3BXL: 12.2(17d)SXB1 and higher • Cisco 7600 Series • WS-SUP720 supports Cisco IOS 12.2(14)SX2 and later • WS-SUP720-3B supports Cisco IOS 12.2(17d)SXB1 and later • WS-SUP720-3BXL supports Cisco IOS 12.2(17b)SXB and later |
Protocols | • Layer 3 routing protocols, Border Gateway Protocol version 4 (BGPv4), Open Shortest Path First (OSPF), Intermediate System-to-Intermediate System (IS-IS), Enhanced Interior Gateway Routing Protocol(EIGRP), Routing Information Protocol (RIP), Distributed FIB Switching, Cisco Discover Protocol (CDP), Internet Control Message Protocol (ICMP) • Traditional Protocols such as Internetwork Packet Exchange (IPX), Appletalk, DECnet, Virtual Integrated Network Service (VINES), Connectionless Network Service (CLNS) • Multicast forwarding, Protocol independent Multicast (PIM) (both sparse and dense mode), (S,G), (*,G), Bi-Directional PIM in hardware • Comprehensive MPLS support • Cisco Group Management Protocol and Internet Group Management Protocol (IGMP) snooping |
Memory | • WS-SUP720 supports 512MB of DRAM for the route processor and 512 MB for the switch processor • WS-SUP720-3B supports 512MB of DRAM for the route processor and 512 MB for the switch processor, upgradeable to 1GB • WS-SUP720-3BXL supports 1GB DRAM for route the processor and 1GB DRAM for the switch processor • 64MB or 512MB (s/w image dependent) Boot Flash for SP switch processor and 64-MB of Boot Flash for the route processor |
Options | Removable storage: 64MB, 128 MB, 256 MB, 512 MB (Compact Flash) |
Uplink Ports | Two Gigabit Ethernet ports, one Small Form-Factor Pluggable (SFP), one selectable SFP or 10/100/100 RJ-45 |
Console Ports | One (RS-232) |
Reliability and Availability | • FSU (Fast software upgrade) • RPR+ (Route Processor Redundancy+) • SSO+NSF (Stateful Switchover + Nonstop Forwarding) • OIR (Online insertion and removal) Hot Swap |
MIBs | • MPLS LDP MIB, MPLS Label Switch Router (LSR) MIB, MPLS-TE MIB, MPLS VPN MIB; see software release notes for additional information |
Network Management | Cisco Works |
Physical Specifications | • (H x W x D): 1.6 x 15.3 x 16.3 in. (4.0 x 37.9 x 40.3 cm) • Weight: 11.5 lb |
Power Consumption | • Sup720 (includes PFC3A, MSFC3): 7.5A (315W) • Sup720-3B (includes PFC3B, MSFC3): 6.72A (282W) • Sup720-3BXL (includes PFC3BXL, MSFC3): 7.82A (328W) |
Environmental Conditions | • Operating temperature: 32 to 104°F (0 to 40°C) • Storage temperature: -40 to 167°F (-40 to 75°C) • Relative humidity: 10 to 90 percent, noncondensing • Regulatory compliance |
Compliance | CE Markings • Safety • UL 60950 • EN 60950 • CSA-C22.2 No. 60950 • IEC 60950 • AS/NZS 3260 • IEC 60825-1,-2 • EN 60825 -1,-2 • 21CFR1040-10 • TS001 • EMC • FCC Part 15 (CFR 47) Class A • ICES-003 Class A • EN 55022 Class A • CISPR 22 Class A • AS/NZS 3548 Class A • VCCI Class A • EN55024 • ETS300 386 • EN50082-1 • EN61000-6-1 |