Image | - Brightness: 20,000 ANSI lumens, 22,000 centre lumens
- Contrast: 1600-2000:1 full field | 650:1 ANSI
- Uniformity: 90% brightness uniformity
|
Display | - Type: 3-chip 0.95” DMD
- Native resolution: SXGA+ (1400 x 1050)
- Frame delay: As low as one frame
|
Lamp | - Type: 3kW xenon pre-aligned bubble lamp module
- Life: 750 hours typical lamp life
|
Input | Standard - Slot 1-2 populated, standard: two Dual Link DVI-D (330 MHz) input cards (each has VGA (165 MHz) for 3D or dual input 3D compatibility) with HDMI 1.3 receiver
- Slot 3-4 unpopulated
Optional - Analog
- Dual link DVI
- SD/HD-SDI
- Video Decoder
- Twin HDMI
Signals - HDTV formats VGA through to QXGA (2048 x 1536)
- Accepts all current 2D HDTV/DTV formats (optional input module may be required)
- HDMI 1.3 receiver supports mandatory HDMI 1.4a 3D modes of operation plus 24-144Hz triple flash 3D mode
- Multi-standard video decoder
- Horizontal and vertical scaling, all inputs
Pixel clock Scan rates - Horizontal: 15-120kHz
- Vertical: 23.97-150Hz (frame lock maximum 120Hz)
- 48-60Hz frame doubled or dual input 3D
- 96-120Hz frame rate up to 1920 x 1200
- 24-144Hz triple flash 3D
|
| Inputs/outputs, control and networking | - RS232 In/Out
- RS422 In
- Ethernet (10/100)
- GPIO (RS232 9 Pin male connector)
- Built-in, backlit LCD keypad
- Remote control (with optional wired XLR connection)
|
| Optical system | - Dust-sealed 3-chip DMD light engine
- Motorised horizontal and vertical lens offset
- Scheimpflug/Boresite (tilt) adjustment
- Built-in light shutter
- Tool-free lens insertion system
|
Lens options | Fixed - 0.73:1 SX+ ILS lens*
- 1.2:1 SX+ ILS lens
Zoom - 1.25-1.6:1 SX+ ILS lens**
- 1.5-2.0:1 SX+ ILS lens
- 2.0-2.8:1 SX+ ILS lens
- 2.8-4.5:1 SX+ ILS lens
- 4.5-7.5:1 SX+ ILS lens
- 7.5-11.2:1 SX+ ILS lens
Offsets - +/- 100% Vertical
- +/- 50% Horizontal
- *0.73:1 +/-23%V +/- 13%H
- ** 1.25-1.6:1 +/-70%V +/- 45%H
|
Accessories | Standard - IR remote
- Power cord
- GPIO 3D sync card
Optional - 3.0kW Xenon lamp bare bulb kit
- Bulb alignment tool
- ILS lens adapter kit
- CT lens mount
- Yellow notch filter
- Fog filters
- Remote IR sensor
- Active 3D glasses
- Active stereoscopic emitter
- DMX512 interface card
- Passive 3D glasses
- Passive stereoscopic modulator
|
Enhanced feature sets | - Embedded Christie Twist™
- Intelligent Lens System (ILS™)
- Advanced block artifact reduction
- ChristieNET™ web interface
- User-friendly, intuitive LCD keypad
- Advanced Loop-Thru twin HDMI card
- Lamp memory module
- User replaceable lamps
- Advanced, 10-bit processing
- Automatic shut off
- Dust-sealed light engine
- SNMP (simple network management protocol)
- DHCP (dynamic host configuration protocol)
- Liquid cooling
- Setup lights
- Compatibility with many legacy accessories
|
Power requirements | - Operating voltage: 200-240V AC @ 50/60Hz
- Max current: 20A @200V
- Max power: 4000W
- Dissipation: 13,650 BTU/hr
|
Dimensions | - Dimensions: (LxWxH): 815 x 621 x 419mm (32 x 24.5 x 16.5")
- Shipping dimensions: (LxWxH): 1041 x 825 x 749mm (41 x 32.5 x 29.5")
- Weight: 72.5kg (160lbs) (without lens)
- Shipping weight: 91kg (200lbs)
|
| Operating environment | - Temp: 5 – 40°C (40 – 104°F)
- Humidity: 20 – 80% noncondensing
|
Regulatory | - Directives (EC) 2002/95/EC (RoHS); 2002/96/EC (WEEE); Regulation (EC) No. 1907/2006 (REACH)
- CAN/CSA C22.2 No. 60950-1
- UL 60950-1
- IEC 60950-1
- FCC, Part 15, Subpart B, Class A
- EN55022/CISPR22 Class A
- EN55024/CISPR24
- Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC (Korea), PSE (Japan), C-Tick (Australia & New Zealand), South Africa
|
| Limited warranty | - Three years parts and labour (including light engine)
- Contact an authorised Christie representative for full details of our limited warranty
|
