Описание товара
Подробности
-
Дополнительная информация
| Content/file format | |||
|---|---|---|---|
| File types | MXF-wrapped JPEG 2000 in DCP (Digital Cinema Package, unencrypted) | ||
| Video formats | |||
| JMP 9600 HD models | 1280x720p5,6,7,8*, 1920x1080i2,3 1 = at 24 Hz, 2 = at 25 Hz, 3 = at 29.97 Hz, 4 = at 30 Hz, 5 = at 48 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz (*at 4:2:2 only) | ||
| JMP 9600 2K models | 1280x720p5,6,7,8 1920x1080i2,3,4, 1920x1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1 = at 24 Hz, 2 = at 25 Hz, 3 = at 29.97 Hz, 4 = at 30 Hz, 5 = at 48 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz | ||
| Audio formats | 16, 20, or 24 bits, 48 kHz broadcast WAV | ||
| |||
| Video processing | |||
| Processing | 8, 10, or 12 bits per color channel | ||
| Data rates | Playback at up to 250 Mbps (125 Mbps per video channel in 2 channel mode) | ||
| Standards | ISO/IEC 15444-1 JPEG 2000, 32x32 codeblock | ||
| Video output | |||
| Number/signal type | 1 dual link HD-SDI in 4:4:4 or 2 single link HD-SDI in 4:2:2 and 2 DVI or RGBHV in 4:2:2 | ||
| Connectors | 2 female BNC 2 female DVI-I | ||
| Nominal level | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | 0.0 V to 1.0 Vp-p for RGB | ||
| Impedance | 75 ohms for RGB | ||
| Resolution | Follows input file format | ||
| Standards | Analog RGB, Y Pr Pb output: SMPTE 274M, SMPTE 296M DVI output: SMPTE 274M, SMPTE 296M HD-SDI output: SMPTE 292M (single link), SMPTE 372M (dual link) | ||
| Frame rate | Follows the file format. | ||
| Player sync | |||
| External sync in (genlock) | 1 Vp-p, bi-level or tri-level | ||
| Genlock connectors | 1 female BNC (genlock in, black burst) 2 female 6-pin mini DIN (LOCK proprietary genlock in and out, for connection to other JMP 9600 units) | ||
| Time code | |||
| Signal level | Input impedance: 600 ohms Input level: >100 mVp-p Output level: 1 Vp-p | ||
| Rates | |||
| JMP 9600 HD models | 1 SMPTE, EBU, film output on a female RCA connector (tip-sleeve) | ||
| JMP 9600 2K models | 2 SMPTE, EBU, film (input and output) on a pair of female RCA connectors (tip-sleeve) | ||
| Sync — analog video outputs | |||
| Output type | For analog output: RGBHV | ||
| Output level | 2.75 V to 3.3 Vp-p, unterminated for RGBHV | ||
| Output impedance | RGBHV: 75 ohms | ||
| Output polarity | H negative, V negative | ||
| Audio processing | |||
| Processing | 24 bit, 48 kHz sampling | ||
| Digital audio output | |||
| Number/signal type | 8 AES/EBU (16 channels, unbalanced, uncompressed) | ||
| Connectors | 8 female BNC | ||
| Impedance | 75 ohms | ||
| Nominal level | 0.5 V to 1.5 Vp-p | ||
| Attenuation range per channel | 0 to -144 dB | ||
| Control — host ports — JPEG video player | |||
| Serial host control ports | 2 bidirectional RS-232, female 9-pin D connectors: 1 for control, 1 unused | ||
| Baud rate and protocol | 300 to 115200 baud (115200 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or even or odd parity | ||
| Serial control pin configuration | 2 = Tx, 3 = Rx, 5 = GND | ||
| Ethernet host port | 2 female RJ-45 | ||
| Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect | ||
| Ethernet protocol | ICMP (ping), IP, TCP, DHCP, HTTP, Telnet, FTP | ||
| Ethernet default settings | IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off | ||
| Storage | |||
| JMP 9600 HD, JMP 9600 2K | |||
| Hard drives | (2) 500 GB hard drives, RAID 0 | ||
| JMP 9600 HD 128, JMP 9600 2K 128 | |||
| Solid state drives | (2) 64 GB solid state drives, RAID 0 | ||
| Program control | MSVPP command set Microsoft® Internet Explorer®, Apple® Safari®, Mozilla® Firefox®, Telnet | ||
| Software encoder | J2KENC and J2KENC-PRO | ||
| Digital I/O control | |||
| Number/type | 4 digital inputs 4 relay outputs (2) 12 VDC outputs | ||
| Connectors | |||
| Digital inputs | (2) 3.5 mm captive screw connectors, 4 pole | ||
| Relay outputs | (3) 3.5 mm captive screw connectors, 4 pole | ||
| Power | (1) 3.5 mm captive screw connector, 4 pole | ||
| Pin configurations | |||
| Digital inputs | Pins 1, 3, 5, 7 = positive; pins 2, 4, 6, 8 = negative | ||
| Relay outputs | Pins 1, 4, 7, 10 = closed; pins 2, 5, 8, 11 = GND; pins 3, 6, 9, 12 = open | ||
| Power | Pins 1, 2 = +12 VDC; pins 3, 4 = GND | ||
| Digital inputs | |||
| Input voltage range | 5 to 24 VDC (with external current limiting resistor) | ||
| Input current range | 5 to 20 mA | ||
| Digital output contact rating | 1 A, 24 VDC, maximum | ||
| General | |||
| Power supply* | Internal Input: 100-240 VAC, 50-60 Hz *A redundant power supply is included. | ||
| Power consumption | 70 watts | ||
| Temperature/humidity | Operating: +50 to +104 °F (10 to +40 °C) / 10% to 90%, noncondensing | ||
| Cooling | Fan. Air flows in from the front and out through the vents in the two sides, as viewed from front panel. | ||
| Thermal dissipation | 239 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with included brackets | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 3.5" H x 17.0" W x 15.5" D (2U high, full rack wide) 8.9 cm H x 43.2 cm W x 39.4 cm D (Depth excludes connectors and handles. Width excludes rack ears. Width with rack ears is 19.0" [48.3 cm].) | ||
| Product weight | 23 lbs (10.4 kg) | ||
| Shipping weight | 28 lbs (13 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, NRTL | ||
| EMI/EMC | CE, FCC Class A | ||
| Warranty | 3 years parts and labor | ||
| |||
| |||