Описание товара
Подробности
- Receives RGBHV, component video, S-video, composite video, audio, and RS-232 over a single CATx cable
- Automatically routes incoming MTP signal to appropriate connectors
- Compatible with MTPX and MTPX Plus Series matrix switchers, all MTP Series transmitters, and MTP switchers
- Compatible with HDTV component video, bi-level or tri-level sync
- Separate variable level and peaking controls
- Independent skew compensation adjustments for each color
Дополнительная информация
| MTP U R Series | |||
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Video input | |||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | 1 female RJ-45 | ||
| Video output | |||
| Number/signal type | 1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) | ||
| Connectors | |||
| MTP U R RSA SEQ, MTP C7 U R RSA SEQ | 1 female 15-pin HD for RGB 3 female BNC for Y, R-Y, B-Y 1 female 4-pin mini DIN for S-video (Y/C) 1 female BNC for composite video | ||
| All other models | 1 female 15-pin HD for RGB or Y, R-Y, B-Y 1 female 4-pin mini DIN for S-video (Y/C) 1 female BNC for composite video | ||
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video | ||
| Minimum/maximum levels | 0.8 V to 1.2 Vp-p | ||
| Impedance | 75 ohms (during video output only) | ||
| Return loss | <-30 dB @ 5 MHz (during video output only) | ||
| DC offset | <±20 mV with input at 0 offset | ||
| Skew compensation | 62 ns | ||
| Maximum resolution | Up to 1920x1200 or 2048x1080 or 1080p at 300' Up to 1024x768 at 600' | ||
| |||
| Sync | |||
| Output type | RGBHV, RGBS | ||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Output level | 4.0 V to 5.0 Vp-p, unterminated | ||
| Output impedance | 87 ohms (24 mA) | ||
| Polarity | Positive or negative (selectable) | ||
| Audio — MTP U R RSA SEQ, MTP U R A, MTP C7 U R RSA SEQ | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | >70 dB at maximum output (unweighted) | ||
| Audio input — MTP U R RSA SEQ, MTP U R A, MTP C7 U R RSA SEQ — See MTP Series transmitters' audio output specifications | |||
| Number/signal type | 1 set of proprietary analog signals | ||
| Connectors | 1 female RJ-45 | ||
| |||
| Audio output — MTP U R RSA SEQ, MTP U R A, MTP C7 U R RSA SEQ | |||
| Number/signal type | 2 mono, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±1 dB channel to channel | ||
| Control/remote — external device (pass-through, unidirectional or bidirectional) (RS and RSA models) | |||
| Serial control port input/output | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
| Baud rates | Up to 38400 bps at up to 600' (183 m) | ||
| |||
| Protocol | Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none | ||
| |||
| Serial control pin configuration | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND | ||
| General | |||
| Recommended cable type | |||
| MTP C7 U R RSA SEQ | CAT 7 (shielded) or Extron STP201 | ||
| All other models | CAT 5/5e/6 (shielded or unshielded) | ||
| |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts | ||
| Power input requirements | 12 VDC, 0.5 A | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
| Cooling | Convection, vents on top and sides | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U rack shelf | ||
| Furniture mount | Yes, with optional mini under-desk mounting kit | ||
| Pole mount | Yes, with optional pole mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) | ||
| Product weight | 0.6 lbs (0.3 kg) | ||
| Shipping weight | 2 lbs (1 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Warranty | 3 years parts and labor | ||
| |||
| |||
