+7 (916) 0-100-600

Тел: +7 (916) 0-100-600



Extron MTP 1500RL 15HD RS SEQ

Extended Distance MTP Twisted Pair Receiver for VGA and RS-232 with Skew Equalization
Артикул (SKU): 60-960-02


Наличие: Заказ 30-40 дней

245 789,44 руб.
245 789,44 руб.
Extron

Только безналичный расчет, НДС 0%. Цену теперь надо перепроверять перед заказом

Мы продолжаем привозить оборудование, соблюдаем сроки от 2 до 8 недель

Более 10 000 товаров от 30 производителей

Торопитесь, дверца постепенно закрывается

В новых обстоятельствах, поставка только на заказ, требуется предоплата

Описание товара

Подробности

-

Дополнительная информация

Video
   Gain Unity
   Number/signal type  
      MTP 4T 15HD RS 4 sets of proprietary analog signals
      All other models 1 set of proprietary analog signals
   Connectors  
      MTP 4T 15HD RS 4 female RJ-45
      MTP R 15HD RSA D 1 female RJ-45 on a pigtail
      All other models 1 female RJ-45
 
Video input and loop-through — transmitter (MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS)
   Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
   Connectors 2 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 250 mV
 
Video output — receivers
   Number/signal type  
      MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
      All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
   Connectors  
      MTP R 15HD RSA D 1 female 15-pin HD
      All other receivers 1 female RJ-45
1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset <±20 mV with input at 0 offset
   Skew compensation 62 ns
   Maximum resolution  
      MTP 1500RL 15HD models Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
      All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
    NOTE    Refer to the user's manual for the maximum distances recommended for specific resolutions.
 
Sync
   Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs
   Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
   Output level (receivers)  
      MTP 1500RL 15HD models 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS
      All other models 4.0 V to 5.0 Vp-p, unterminated
   Input impedance  
      MTP C7 models 573 ohms
      All other models 510 ohms
   Output impedance  
      MTP C7 models 92 ohms ±8% (25 mA)
      All other models 110 ohms
   Polarity  
      Transmitter Positive or negative (follows input polarity)
      Receivers Positive or negative (switch selectable)
 
Control/remote — external device (pass-through, unidirectional or bidirectional)
   Serial control port input/output
      MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS RS-232 via (1) 3.5 mm, 3 pole captive screw connector
      MTP R 15HD RSA D, MTP C7 RL 15HD RS, MTP C7 RL 15HD RS SEQ 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input
      MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS 1 set of proprietary signals on a female RJ-45 jack
      MTP R 15HD RSA D RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
      All other receivers RS-232 via a 3.5 mm, 3 pole captive screw connector
   Baud rates  
      MTP R 15HD RSA D, MTP 1500RL 15HD RS, MTP 1500RL 15HD RS SEQ Up to 38400 bps at up to 1000' (304.8 m)
      All other models Up to 38400 bps at up to 600' (183 m)
    NOTE    Higher data rates and distances are possible. Performance varies based on baud rate and cable length.
   Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE    Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
 
General
   Recommended cable type  
      Models other than C7 models CAT 5/5e/6 (shielded or unshielded)
   Required cable type  
      MTP C7 15HD models Extron DTP26 or CAT 7
   Power MTP 4T 15HD RS only: 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal
   External power supply All models except MTP 4T 15HD RS: 
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
   Power input requirements For models except MTP 4T 15HD RS.
      MTP 1500RL 15HD models 12 VDC, 1.0 A max.
      All other models 12 VDC, 0.5 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  
      MTP 1500RL 15HD models Convection, vents sides to top
      All other models Convection, no vents
   Mounting  
      Rack mount  
         MTP R 15HD RSA D No
         MTP 4T 15HD RS Yes, with included mounting kit
         All other models Yes, with optional 1U rack shelf
      Furniture mount  
         MTP R 15HD RSA D Yes, using a standard electrical wall box or Decora® size mud ring
         MTP 1500RL 15HD models No
         All other models except MTP 4T 15HD RS Yes, with optional mini under-desk mounting kit
      Wall mount  
         MTP 1500RL 15HD models Yes, with optional wall mounting kit
      Pole mount
         MTP R 15HD RSA D No
         MTP 1500RL 15HD models No
         All other models except MTP 4T 15HD RS Yes, with optional pole mounting kit
   Enclosure type Metal
   Enclosure dimensions  
      MTP R 15HD RSA D  
         Faceplate 2.6" H* x 1.3" W x 0.24" D 
(6.6 cm H* x 3.3 cm W x 0.5 cm D) 
*Overall height is 4.1" (10.4 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W Decora®-style wallplate. Depth excludes connectors.)
         Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
      MTP 4T 15HD RS 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)
      MTP 1500RL 15HD models 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
      All other models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight  
      MTP 4T 15HD RS 6.0 lbs (2.7 kg)
      MTP 1500RL 15HD models 1 lb (0.5 kg)
      All other models 0.4 lbs (0.2 kg)
   Shipping weight  
      MTP 4T 15HD RS 10 lbs (5 kg)
      All other models 2 lbs (1 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE    All nominal levels are at ±10%.
    NOTE    Specifications are subject to change without notice.

Отзывы

Напишите ваш собственный отзыв

Ваш отзыв для: Extron MTP 1500RL 15HD RS SEQ

Как вы оцениваете этот товар? *

 1 звезда2 звезды3 звезды4 звезды5 звёзд
Качество
Цена