Описание товара
Подробности
Контрольный процессор для управления устройствами по IP разработан для применения с контрольными панелями TouchLink® . IPL 250 обеспечивает управление по сериальному порту, IR, имеет выключатели а также контактные разъемы для взаимодействия с дисплеями, коммутаторами, источниками медиа, управлением экрана, светом и другими системами.
Дополнительная информация
Ethernet control interface | |||
---|---|---|---|
Connectors | 1 RJ-45 female connector | ||
Data rate | 10/100Base-T, half/full duplex with autodetect | ||
Protocols | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet | ||
Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off | ||
Web server | Up to 200 simultaneous sessions 7.25 MB nonvolatile user memory | ||
Program control | Extron Global Configurator 3 for Windows® Extron Simple Instruction Set™ (SIS™) Microsoft® Internet Explorer®, Telnet | ||
Global Viewer requirements | Microsoft® Internet Explorer® ver. 6 or higher | ||
Serial control interface | |||
Quantity/type | 3 bidirectional RS-232 | ||
Connectors | (1) 3.5 mm captive screw connector, 5 pole (2) 3.5 mm captive screw connectors, 3 pole | ||
Baud rate and protocol | 300 to 115200 baud Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| |||
Pin configurations | |||
Serial, 5-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = GND, 4 = RTS, 5 = CTS | ||
Serial, 3-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = GND | ||
IR control interface | |||
Quantity/type | 4 IR (carrier and non-carrier) | ||
Connectors | (2) 3.5 mm captive screw connectors, 4 pole | ||
IR output carrier frequency | 30 kHz to 1 MHz | ||
Pin configurations | Pins 1, 3, 5, 7 = IR signal ports 1, 2, 3, 4 (respectively) Pins 2, 4, 6, 8 = GND | ||
IR learning carrier frequency | 30 kHz to 1 MHz | ||
IR learning capture distance | 2" (5.1 cm) to 12" (30.5 cm) from the front panel | ||
Relay control interface | |||
Quantity/type | 4 normally open relays | ||
Relay control connectors | (2) 3.5 mm captive screw connectors, 4 pole | ||
Relay control contact rating | 24 V, 1 A | ||
Contact closure control interface | |||
Quantity/type | 4 contact closure inputs | ||
Contact input control connector | (1) 3.5 mm captive screw connector, 5 pole | ||
Contact closure (input only) | |||
Input voltage range | 0 to 5 VDC, clamped at +5.1 V | ||
Input impedance | 10k ohms | ||
Threshold | 1.6 VDC | ||
Pin configuration | Pins 1, 2, 3, 4 = inputs 1, 2, 3, 4; pin 5 = GND | ||
General | |||
Power | Supplied by an included external power supply | ||
External power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated | ||
Power input requirements | 12 VDC, 0.5 A | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
Cooling | Convection, no vents | ||
Mounting | |||
Rack mount | Yes, with optional 1U rack shelf | ||
Furniture mount | Under-furniture mountable with optional kit | ||
Projector mount | Yes, with optional projector mount kit | ||
Enclosure type | Metal | ||
Enclosure dimensions | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) | ||
Product weight | 0.7 lbs (0.3 kg) | ||
Shipping weight | 2 lbs (1 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety. | ||
EMI/EMC | CE, C-tick, FCC Class A, ICES, KC mark, VCCI | ||
Environmental | Complies with the appropriate requirements of RoHS, WEEE | ||
Warranty | 3 years parts and labor |