Описание товара
Подробности
- Accepts fiber optic signals from FOX Series transmitters and provides HDMI video, stereo audio, and RS-232 control signals
- HDCP compliant
- All-digital technology provides pixel-for-pixel performance with signals up to 1920x1200, including HDTV 1080p/60 and 2K
- Integrates easily into a wide range of 4K and UHD environments
- Key Minder® continuously verifies HDCP compliance for quick, reliable switching
- HDMI audio de-embedding with analog stereo outputs
Дополнительная информация
| Optical fiber interconnection between transmitter and receiver | |||
|---|---|---|---|
| Number/type | 2 fiber optic | ||
| Connectors | 2 LC connectors | ||
| Operating distance | |||
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with a FOXBOX SM | ||
| Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cables with a FOXBOX MM 1 km (3280') with 50 µm OM2 multimode (MM) cables with a FOXBOX MM 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode cable with a FOXBOX MM | ||
| |||
| Nominal peak wavelength | 850 nm for FOXBOX MM, 1310 nm for FOXBOX SM | ||
| Data rate | 4.25 Gbps | ||
| Transmission power | |||
| Singlemode | -5 dBm, typical | ||
| Multimode | -5 dBm, typical | ||
| Maximum receiver sensitivity | |||
| Singlemode | -18 dBm, typical | ||
| Multimode | -12 dBm, typical | ||
| Optical loss budget | |||
| Singlemode | 13 dB, maximum | ||
| Multimode | 7 dB, maximum | ||
| Video | |||
| |||
| Resolution range | Up to 1920x1200 or 1080p @ 60 Hz pixel for pixel | ||
| Formats | RGB and YCbCr digital video | ||
| EDID | Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables. | ||
| HDCP | Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards | ||
| Standards | DVI 1.0, HDMI, HDCP 1.1, CEA-861E | ||
| Video input — See the FOXBOX Tx HDMI transmitters specifications | |||
| Video output | |||
| Number/signal type | 1 single link HDMI | ||
| Connectors | 1 female HDMI type A | ||
| Nominal level | 0.8 Vp-p | ||
| Video delay | 1-2 frames | ||
| Audio | |||
| Gain | |||
| Range | Adjustable, -18 dB to +10 dB | ||
| Default | Unbalanced output: -6 dB; balanced output: 0 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.10% @ 1 kHz at nominal level | ||
| S/N | >80 dB at maximum output (unweighted) | ||
| CMRR | 65 dB @ 20 Hz to 20 kHz | ||
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) | ||
| Sampling rate | 48 kHz | ||
| Audio input — See the FOXBOX Tx HDMI transmitters specifications | |||
| Audio output | |||
| Number/signal type | 1 stereo/mono, balanced/unbalanced | ||
| Connectors | (1) 3.5 mm captive screw connector, 5 pole 1 female HDMI, type A (shared with HDMI video) | ||
| Impedance | 50 ohms unbalanced | ||
| Nominal level | -10 dBV (316 mVrms) | ||
| Maximum level (Hi-Z) | >+11.0 dBu, balanced at 1% THD+N | ||
| Maximum level (600 ohm) | >10.0 dBu, balanced at 1% THD+N | ||
| Audio delay | 1.5 frames | ||
| |||
| Control/remote | |||
| Serial control ports on each unit | |||
| Control | 1 RS-232, 2.5 mm mini stereo jack (front panel) 1 RS-232, 3.5 mm captive screw connector, 3-pole (rear panel) | ||
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used) (rear panel) | ||
| Baud rate and protocol | |||
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Pass-through | 9600 to 115,200 baud | ||
| Serial control pin configuration | Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND Captive screw: 1 = Tx, 2 = Rx, 3 = GND | ||
| Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts | ||
| Power consumption | |||
| Device | 6.9 watts, 12 VDC | ||
| Device and power supply | 8.7 watts, 12 VDC | ||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
| Cooling | Convection, vents on top and side panels | ||
| Thermal dissipation | |||
| Device | 22.1 BTU/hr | ||
| Device and power supply | 28.3 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with optional rack shelf | ||
| Furniture mount | Yes, with optional under desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors and switch.) | ||
| Product weight | 1.1 lbs (0.5 kg) | ||
| Shipping weight | 4 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, FDA Class 1, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE | ||
| Warranty | 3 years parts and labor | ||
