Описание товара
Подробности
Линейка приемников и передатчиков Extron MTP AV являеется частью семейства экономичных, компактных устройств VersaTools® в корпусе шириной в одну восьмую стойки для интеграции в существующие или новые аудиовизуальные среды. Передатчики и приемники могут использоваться с любым кабелем CAT 5, 5e или 6 или с UTP кабелем Extron Skew-Free™ для передачи аудио/видео на расстояние 300 м. и больше. Приемники и передатчики MTP компактны, так что могут быть установлены где угодно: в стойки, под столы или около мониторов. Также доступны передатчики в виде двойных плат AAP или в версии 45-ти мм для Европейских кабельных каналов.
Дополнительная информация
| Video | |||
|---|---|---|---|
| Gain | Unity | ||
| Differential phase error | <1.0° at 3.58 MHz and 4.43 MHz | ||
| Differential gain error | <1.0% at 3.58 MHz and 4.43 MHz | ||
| Video input | |||
| Number/signal type | |||
| MTP T AV Series | 1 composite video | ||
| MTP T SV Series | 1 S-video | ||
| MTP R AV/SV Series | 1 set of proprietary analog signals | ||
| Connectors | |||
| MTP T AV Series | 1 female BNC | ||
| MTP T AV AAP | 1 female RCA | ||
| MTP T SV Series | 1 female 4-pin mini DIN | ||
| MTP R AV/SV Series | 1 female RJ-45 | ||
| Nominal level | 1 Vp-p for Y of S-video and for composite video 0.3 Vp-p for C of S-video | ||
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Return loss | <-30 dB, DC @ 10 MHz | ||
| DC offset (max. allowable) | 100 mV | ||
| Video output | |||
| Number/signal type | |||
| MTP T AV/SV Series, MTP T AAP Series | 1 set of proprietary analog signals | ||
| MTP R AV Series | 1 composite video | ||
| MTP R SV Series | 1 S-video | ||
| Connectors | |||
| MTP T AV/SV Series | 1 female RJ-45 | ||
| MTP T AAP Series | 1 female RJ-45 on a 3" (7.6 cm) pigtail | ||
| MTP R AV Series | 1 female BNC | ||
| MTP R SV Series | 1 female 4-pin mini DIN | ||
| Nominal level | 1 V p-p for Y of S-video and for composite video 0.3 V p-p for C of S-video | ||
| Minimum/maximum levels | 0.3 V to 1.5 Vp-p | ||
| Impedance | 75 ohms | ||
| Return loss | <-35 dB @ 5 MHz | ||
| DC offset | ±20mV with input at 0 offset | ||
| Sync | |||
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | ||
| Audio | |||
| Gain | |||
| RCA models | Unbalanced output: 0 dB (unity) | ||
| All other models | Unbalanced output: 0 dB (unity); balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.25 dB | ||
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| S/N | |||
| RCA models | >90 dB, at maximum output (unweighted) | ||
| All other models w/audio | >90 dB, balanced at maximum output (unweighted) | ||
| Crosstalk | <-80 dB @ 1 kHz, fully loaded | ||
| Stereo channel separation | >75 dB @ 1 kHz | ||
| CMRR | >34 dB @ 20 Hz to 20 kHz | ||
| Audio input | |||
| Number/signal type | |||
| MTP T AV, MTP T SV A | 1 stereo, balanced/unbalanced | ||
| MTP T AV/SV A RCA, MTP T AAP, MTP T 45 Series | 1 stereo, unbalanced | ||
| MTP R Series | 1 set of proprietary analog signals | ||
| Connectors | |||
| MTP T AV, MTP T SV A | (1) 3.5 mm captive screw connector, 5 pole | ||
| MTP T AV/SV A RCA, MTP T AAP | 1 pair of female RCA | ||
| MTP R Series | 1 female RJ-45 (shielded) | ||
| Impedance | >5.6k ohms ±5% unbalanced, >10k ohms ±5% balanced | ||
| Nominal level | -10 dBV (0.32 Vrms) | ||
| Maximum level | >+2.4 dBu (balanced or unbalanced) at 1%THD+N | ||
| |||
| Audio output | |||
| Number/signal type | |||
| MTP T Series | 1 set of proprietary analog signals (all MTP T models) | ||
| MTP R AV, MTP R SV A | 1 stereo or dual mono, balanced/unbalanced | ||
| MTP R AV/SV A RCA | 1 stereo or dual mono, unbalanced | ||
| Connectors | |||
| MTP T Series | 1 female RJ-45 (shielded) | ||
| MTP T AAP Series | 1 female RJ-45 on a 3" (7.6 cm) pigtail | ||
| MTP R AV, MTP R SV A | (1) 3.5 mm captive screw connector, 5 pole | ||
| MTP R AV/SV A RCA | 1 pair of female RCA | ||
| Impedance | |||
| MTP R AV, MTP R SV A | 50 ohms unbalanced, 100 ohms balanced | ||
| MTP R AV/SV A RCA | 50 ohms unbalanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+3.3 dBu, balanced or unbalanced at 1%THD+N | ||
| Maximum level (600 ohm) | >+2.0 dBm, balanced or unbalanced at 1%THD+N | ||
| General | |||
| Recommended cable type | CAT5/5e/6 (shielded or unshielded) | ||
| External power supply | 100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated | ||
| Power input requirements | 12 VDC, 0.2 A | ||
| |||
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
| Cooling | Convection, no vents | ||
| Mounting | |||
| Rack mount | |||
| MTP T AAP Series | Yes, with optional rack panel | ||
| All other models | Yes, with optional 1U rack shelf | ||
| Furniture or wall mount | |||
| MTP T AAP Series | Yes, with optional AAP mounting plates | ||
| All other models | Yes, with optional brackets. | ||
| Enclosure type | Metal | ||
| Enclosure dimensions (Depths exclude connectors and cables.) | |||
| MTP T AAP Series | |||
| Faceplate | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate) | ||
| Transmitter | 1.35" H x 2.7" W x 1.3" D (3.4 cm H x 6.9 cm W x 3.3 cm D) | ||
| All other models | 1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide) (4.2 cm H x 5.6 cm W x 7.6 cm D) | ||
| Product weight | 1.0 lbs (0.5 kg) | ||
| Shipping weight | 3 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
| Warranty | 3 years parts and labor | ||