Описание товара
Подробности
Extron IN1606 это шести-входовый HDCP-совместимый видео скалер с четырьмя входами HDMI, двумя универсальными входами для аналогового видео и двумя одновременными выходами HDMI. IN1606 принимает широкий ряд видео форматов, включая HDMI с HDCP, HDTV, RGB и видео стандартного разрешения. Маштабирующий процессор обеспечивает деинтерлейсинг 1080i, обработку Deep Color и плавную коммутацию для безупречного качества изображения при выходных разрешениях до 1920x1200 и 2K. В устройстве есть шесть входов для стерео аудио, два регулируемых выхода для стерео аудио, два микшированных входа микрофонного/линейного уровней с дакингом, а также функции врезки и вырезки аудио из HDMI. Разработанное для профессиональной интеграции, устройство IN1606 предлагает различные варианты управления по Ethernet, RS-232 и USB. Компактное устройство является завершенным решением для коммутации сигналов.
- Интегрирует HDMI, HDTV, RGB и видеоисточники в презентационные системы с коммутацией аудио
- Четыре входа HDMI и два универсальных входа для аналогового видео
- Два одновременных выхода HDMI
- Два входа микрофонного/линейного уровней с дакингом и фантомным питанием 48 Вольт
- Врезка аудио в HDMI
- Вырезка аудио из HDMI
Дополнительная информация
| Video input | |
|---|---|
| Number/signal type | 2 RGB, RGBcvS, component video (YUVi or YUVp/HDTV), S-video, composite video 4 HDMI digital video (HDCP compliant) |
| Connectors | 2 female 15-pin HD 4 female HDMI |
| Equalization | Automatic |
| Input cable length | Up to 75' (22.9 m) for all supported input rates |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 100 kHz |
| Vertical frequency | 24 Hz to 75 Hz |
| Resolution range | 640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2k *reduced blanking |
| Return loss | >30 dB @ 5 MHz |
| DC offset (max. allowable) | 1.5 V |
| Video processing | |
| Decoder | 12 bit digital (3D-adaptive comb filter) |
| Analog sampling | 12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB) |
| Digital pixel data bit depth | 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI) |
| Colors | 1 billion (10 bit processing) |
| Video output | |
| Number/signal type | 2 HDMI (HDCP) |
| Connectors | 2 female HDMI |
| HDMI peripheral device power | 200 mA per output |
| Scaled resolution | 640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9,1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9,1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8 HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz |
| Sync | |
| Input type | RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video |
| Input standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video with tri-level sync 0.3 Vp-p for component video with bi-level sync or RGsB |
| Input impedance | Horizontal: 510 ohms Vertical: 510 ohms |
| Max. input voltage | 5.0 Vp-p |
| Audio | |
| Gain | Unbalanced output: -6 dB; balanced output: 0 dB |
| Frequency response | 20 Hz to 20k Hz, ±0.5 dB |
| THD + Noise | <0.1%, 20 Hz to 20k Hz at nominal level |
| S/N | >90 dB at maximum balanced output (unweighted) |
| Crosstalk | ≤-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >80 dB @ 1 kHz |
| Bass | +12 dB to -24 dB @ 100 Hz |
| Treble | +12 dB to -24 dB @ 8 kHz |
| Audio input | |
| Number/signal type | 6 stereo line balanced or unbalanced 2 mono mic/line balanced or unbalanced (with available phantom power) 4 stereo, de-embedded from HDMI (PCM only) |
| Connectors | (6) 3.5 mm, 5 pole captive screw connectors for Line (2) 3.5 mm, 3 pole captive screw connector for Mic/Line 4 female HDMI type A |
| Impedance | >10k ohms unbalanced, >20k ohms balanced |
| Nominal level | Line inputs: +4 dBu, -10 dBV, adjustable Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable |
| Maximum level | +21 dBu at rated THD+N when input gain is set to 0 dB |
| CMRR | >80 dB @ 1 kHz |
| Input gain adjustment | Line inputs: -18 dB to +24 dB, 0.1 dB steps, adjustable per input Mic/line inputs: -18 dB to +60 dB, 0.1 dB steps, adjustable per input LPCM-2Ch: -18 dB to +24 dB, 0.1 dB steps, adjustable per input |
| DC phantom power | +48 VDC ±10% (can be switched on or off per Mic/line input) |
| Audio output | |
| Number/signal type | 1 balanced or unbalanced stereo (variable) 1 balanced or unbalanced stereo; can be configured as stereo or two independently mixed mono channels 2 HDMI embedded |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole 2 female HDMI |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.5 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced; >+15 dBu, unbalanced |
| Output volume range | 0 to -100 dB in 0.1 dB steps |
| Control/remote | |
| Serial control port | 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole |
| Baud rate and protocol | 9600, 8 data bits, 1 stop bit, no parity (default) |
| USB control ports | 1 front panel female mini USB B |
| USB standards | USB 2.0, high speed |
| Ethernet control port | 1 female RJ-45 connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet |
| Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®, Telnet |
| General | |
| Power supply | Internal Input: 100-240 VAC, 50-60 Hz |
| Power consumption | |
| Full load | 26 watts |
| Power save mode | <14 watts |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Passive, side and top vents |
| Thermal dissipation | |
| Full load | 68.7 BTU/hr |
| Power save mode | 45.4 BTU/hr |
| Mounting | |
| Rack mount | Yes, with included, pre-installed brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 1.72" H x 19.0" W x 9.5" D (1U high, full rack wide) (4.4 cm H x 48.3 cm W x 24.1 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight | 4.9 lbs (2.2 kg) |
| Shipping weight | 6.7 lbs (3.0 kg) |
| DIM weight | 7.1 lbs (3.2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental | Complies with the appropriate requirements of RoHS, WEEE. |
| Warranty | 3 years parts and labor |
