+7 (916) 0-100-600

Тел: +7 (916) 0-100-600



Extron MLS 506SA

Six Input Switcher with Stereo Audio Amplifier
Артикул (SKU): 60-386-04


Наличие: Заказ 30-40 дней

347 934,72 руб.
347 934,72 руб.
Extron

Только безналичный расчет, НДС 0%. Цену теперь надо перепроверять перед заказом

Мы продолжаем привозить оборудование, соблюдаем сроки от 2 до 8 недель

Более 10 000 товаров от 30 производителей

Торопитесь, дверца постепенно закрывается

В новых обстоятельствах, поставка только на заказ, требуется предоплата

Описание товара

Подробности

The Extron MLS 506SA is a simple-to-use, six input, multi-format switcher that provides composite video, S-video, component video, and RGB video switching, along with stereo audio input switching. An additional input accepts balanced/unbalanced mono line level audio signals for mixing with any of the four switchable inputs. The switcher features an integrated audio amplifier with 50 watts, 2 x 25 watts rms, into 4 or 8 ohm speaker loads for use of program speakers, and includes two preamp audio outputs. For enhanced operation, ease of room control, and simplified system integration, the MLS 506SA can be controlled with a TouchLink® Control System or MediaLink® Controller.

Дополнительная информация

Video
   Gain Unity
   Bandwidth 350 MHz (-3 dB), fully loaded
   Frequency response < ±0.1 dB @ 30 MHz
   Differential phase error 1.5° at 3.58 MHz and 4.43 MHz
   Differential gain error 1.5% at 3.58 MHz and 4.43 MHz
   Crosstalk -50 dB @ 5 MHz
 
Video input
   Number/signal type 3 RGBHV, RGBS, RGsB, or RsGsBs
3 component video, S-video, or composite video
   Connectors Female BNCs
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.0 V to 2.0 Vp-p with no offset
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-45 dB @ 5 MHz
   DC offset (max. allowable) 1.5 V
 
Video output
   Number/signal type 1 RGBHV, RGBS, RGsB, or RsGsBs
1 component video
1 S-video
1 composite video
   Connectors Female BNCs
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.0 V to 2.0 Vp-p with no offset (follows input)
   Impedance 75 ohms
   Return loss -45 dB @ 5 MHz
   DC offset ±5 mV
   Switching type Triple-Action for RGB
 
Sync
   Input/output type RGBHV, RGBS, RGsB, RsGsBs (output follows input)
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level 2 V to 5 Vp-p
   Output level TTL: 5.0 Vp-p
   Input impedance >1k ohms
   Output impedance 75 ohms, unterminated
   Max. input voltage 5 Vp-p
   Max. propagation delay 30 ns
   Polarity Positive or negative (follows input)
 
Audio
   Gain: line level, fixed output  
      MLS 506  
         Unbalanced 0 dB
         Balanced +6 dB
      MLS 506MA/506SA  
         Unbalanced 0 dB
         Balanced +6 dB
   Gain: line level, variable output Selectable output level
      MLS 506  
         Unbalanced 0 dB (jumper selectable), or
-6 dB (jumper selectable, default)
         Balanced +6 dB (jumper selectable), or
0 dB (jumper selectable, default)
      MLS 506MA, MLS 506SA  
         Unbalanced 0 dB (jumper selectable), or
-6 dB (jumper selectable, default)
         Balanced +6 dB (jumper selectable), or
0 dB (jumper selectable, default)
   Frequency response  
      MLS 506 20 Hz to 20 kHz, +0 dB/-3 dB
      MLS 506MA 50 Hz to 15 kHz, +0 dB/-3 dB; 20 Hz to 20 kHz, +0 dB/-3 dB at 30 watts into 8 ohms
      MLS 506SA 20 Hz to 20 kHz, ±3 dB at 25 W into 8 ohms
   THD + Noise  
      MLS 506 <0.2% @ 50 Hz to 22 kHz at nominal level
      MLS 506MA (amp. output) <1% @ 50 Hz to 20 kHz at 30 watts into 8 ohms
<0.5% @ 1 kHz at 30 watts into 8 ohms
      MLS 506SA (amp. output) <0.5% @ 1 kHz at 25 W into 8 ohms
   S/N >75 dB at 20 Hz to 20 kHz (unweighted)
   Crosstalk <-65 dB @ 20 Hz to 20 kHz, <-80 dB @ 1 kHz and below 60 Hz, fully loaded
   Stereo channel separation  
      MLS 506SA >80 dB @ 1 kHz
      All other models >90 dB @ 1 kHz
   CMRR >90 dB @ 20 Hz to 200 Hz, >60 dB @ 20 Hz to 20 kHz
    NOTE    0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu.
+4 dBu and 0 dBu are professional audio line level standards.
-10 dBV and -20 dBV are semiprofessional, computer audio, and consumer audio standards.
 
Audio input
   Number/signal type  
      MLS 506 6 stereo, balanced/unbalanced
      MLS 506MA/SA 7 stereo, balanced/unbalanced
   Connectors  
      MLS 506 (6) 3.5 mm captive screw connectors, 5-pole
      MLS 506MA/SA (7) 3.5 mm captive screw connectors, 5-pole
   Impedance >18k ohms unbalanced/balanced, DC coupled
   Nominal level -20 dBV (100 mVrms), -10 dBV (316 mVrms), 0 dBu (0.775 Vrms), or +4 dBu 
(1.23 Vrms); (configurable)
   Maximum level +21 dBu (balanced or unbalanced) at 1% THD+N
   Input gain adjustment  
      MLS 506 -15 dB to +9 dB, adjustable per input
   Input level adjustment  
      MLS 506MA, MLS 506SA -42 dB to +24 dB, 1 to 100 steps, adjustable per input
   Input level sensitivity  
      MLS 506MA/SA -20 dBV (100 mVrms) for 30 watt output
 
Audio — effects return (MLS 506MA and MLS 506SA)
   Number/signal type 1 stereo, unbalanced
   Connectors (1) 3.5 mm captive screw connector, 3 pole
   Impedance >10k ohms, unbalanced
   Level +4 dBu, unbalanced
 
Audio — effects send (MLS 506MA and MLS 506SA)
   Number/signal type 1 stereo, unbalanced
   Connectors (1) 3.5 mm captive screw connector, 3 pole
   Impedance 50 ohms, unbalanced
   Level +4 dBu, unbalanced
 
Audio output — line level (all models)
   Number/signal type 2 stereo/mono (selectable), balanced/unbalanced (1 fixed, 1 variable)
   Connectors (2) 3.5 mm captive screw connectors, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu, balanced at 1%THD+N
   Maximum level (600 ohm) >+15 dBm, balanced at 1%THD+N
 
Audio output — power amp (MLS 506MA and MLS 506SA)
   Number/signal type  
      MLS 506MA 1 mono
      MLS 506SA 1 stereo
   Connectors (1) 4 position screw terminal
   Drive/power (full power out) At less than 0.5% THD at 1 kHz:
      MLS 506MA (70V, mono) 30 watts (rms); 4 ohm, 8 ohm, or 70 V output taps with common/ground, transformer coupled
      MLS 506MA (100V, mono) 30 watts (rms); 4 ohm, 8 ohm, or 100 V output taps with common/ground, transformer coupled
      MLS 506SA (stereo) 50 watts; 25 watts (rms) per channel, 4 ohm or 8 ohm load
   Protection  
      MLS 506MA Input limiting, thermal, short circuit
      MLS 506SA Input limiting (user specifies 4 ohm or 8 ohm load), thermal, short circuit
   Indication  
      MLS 506MA Clip LED indicates the onset of 30 watt power limiting
      MLS 506SA Clip LED indicates the onset of 25 watt power limiting on left or right
 
Control/remote — switcher
   Serial control port 1 RS-232, female 9-pin D connector (shared with contact closure port)
(1) 3.5 mm captive screw connector, 5 pole (for control via MLC 206; shared with IR control port)
   Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configuration 2 = TX, 3 = RX, 5 = GND
   Contact closure 1 female 9-pin D connector (shared with serial control port)
   Contact closure pin configuration pin 1 = input 1, pin 4 = input 2, pin 5 = ground, pin 6 = input 3, 
pin 7 = input 4, pin 8 = input 5, pin 9 = input 6
   IR control port (1) 3.5 mm captive screw connector, 5 pole (shared with the MLC/IR serial control port) for 38 kHz IR signals
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
 
General
   Power 100 VAC to 240 VAC, 50-60 Hz, internal
      MLS 506 20 watts
      MLS 506MA 60 watts
      MLS 506SA 80 watts
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, vents on both sides and top
   Mounting  
      Rack mount Yes, with included brackets
   Enclosure type Metal
   Enclosure dimensions 3.5" H x 17.5" W x 9.4" D (2U high, full rack wide)
8.9 cm H x 44.4 cm W x 23.9 cm D
(Depth excludes connectors and knobs.  Width excludes rack ears.)
   Product weight  
      MLS 506 7.0 lbs (3.2 kg)
      MLS 506MA 10.2 lbs (4.6 kg)
      MLS 506SA 8.6 lbs (3.9 kg)
   Shipping weight  
      MLS 506 14 lbs (7 kg)
      MLS 506MA 17 lbs (8 kg)
      MLS 506SA 16 lbs (8 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance  
      Safety CE, c-UL, UL
      Compliances CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor

Отзывы

Напишите ваш собственный отзыв

Ваш отзыв для: Extron MLS 506SA

Как вы оцениваете этот товар? *

 1 звезда2 звезды3 звезды4 звезды5 звёзд
Качество
Цена

Вы возможно также заинтересованы в следующих товарах

Extron MLS 406SA

Extron MLS 406SA

241 000,96 руб.