Описание товара
Подробности
HDMI® over Shielded Twisted Pair Extender. Provides a very simple and reliable solution for extending uncompressed HDMI or DVI signals, along with optional analog audio, up to 100 meters (330 ft) over one or two shielded twisted-pair cables
Дополнительная информация
Video | ||
Input Signal Types | HDMI, DVI[3], DisplayPort Multimode[3] | |
Output Signal Types | HDMI, DVI[3] | |
Formats | HDMI w/Deep Color & 3D, DVI, HDCP content protection support | |
Input Resolutions, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Output Resolutions | Matched to input | |
Audio | ||
Input Signal Types | HDMI, DisplayPort Multimode[3], analog stereo | |
Output Signal Types | HDMI, analog stereo | |
Formats, HDMI | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, Up to 8ch PCM | |
Formats, Analog | Stereo 2-channel | |
Performance (analog) | Frequency Response: 20Hz to 20kHz ±0.25dB; S/N Ratio: >93dB, 20Hz to 20kHz A-weighted; THD+N: 0.01% @ 20Hz to 20kHz; Stereo Separation: >85dB | |
Communications | ||
AV link | 8 Gigabit digital AV & control over shielded twisted-pair cable, up to 100 m (330 ft) cable length[1] | |
Connectors – HD-TX2-C Transmitter | ||
AUDIO IN | (1) 3.5mm TRS mini phone jack; Unbalanced stereo line-level audio input; Maximum Input Level: 2 Vrms; Input Impedance: 15k Ohms | |
HDMI IN | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI or Displayport Multimode[3] | |
AUDIO OUT L, R (rear) | (1) 5-pin 3.5mm detachable terminal block; Connects to AUDIO IN port of the HD-RX2-C receiver via a dedicated STP or UTP cable[2] | |
Ground (rear) | (1) Flying lead, chassis ground connection | |
AV OUT (rear) | (1) 8-pin RJ45 female, shielded; Connects to AV IN port of the HD-RX2-C receiver via a dedicated DM-CBL-8G cable[1] | |
Connectors – HD-RX2-C Receiver | ||
AUDIO OUT | (2) RCA female; Unbalanced stereo line-level audio output; Maximum Output Level: 1.85 Vrms; Output Impedance: 100 Ohms | |
G | (1) 6-32 screw, chassis ground lug | |
HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[3] | |
AV IN | (1) 8-pin RJ45 female, shielded; Connects to AV OUT port of the HD-TX2-C transmitter via a dedicated DM-CBL-8G cable[1] | |
AUDIO IN R, L | (1) 5-pin 3.5mm detachable terminal block; Connects to AUDIO OUT port of the HD-TX2-C transmitter via a dedicated STP or UTP cable[2] | |
PWR 24VDC 0.75A | (1) 2.1mm barrel DC power jack; 24 Volt DC power input (PW-2407WU power pack included)[3] | |
Controls & Indicators – HD-TX2-C Transmitter | ||
PWR/LINK | (1) dual-color amber/green LED, indicates operating power supplied via AV link[4], and indicates AV link status and HDMI input signal presence | |
AV OUT (rear) | (2) LEDs, green LED indicates AV link status, amber LED indicates video and HDCP signal presence | |
SW1 (side) | (1) DIP slide switch, enables hot plug detect | |
Indicators – HD-RX2-C Receiver | ||
PWR | (1) green LED, indicates operating power supplied via local power pack | |
AV IN | (2) LEDs, green LED indicates AV link status, amber LED indicates video and HDCP signal presence | |
Power Requirements | ||
Power Pack | 0.75 Amp @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU, included[4] | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | HD-TX2-C: 2 BTU/hr; HD-RX2-C: 11 BTU/hr | |
Enclosure – HD-TX2-C Transmitter | ||
Construction | Metal, black finish w/polycarbonate label overlay | |
Flush Wall Mount | 1-gang mountable in an extra-deep electrical box (2-1/2 inch deep minimum), requires decorator style faceplate (not included) | |
Surface Mount | Surface mount bracket included | |
Rack Mount | Attachable to a single 19-inch EIA rack rail | |
Enclosure – HD-RX2-C Receiver | ||
Construction | Aluminum w/polycarbonate label overlay and (4) integral mounting flanges | |
Mounting | Freestanding, surface mount, or attach to a single rack rail | |
Dimensions | ||
HD-TX2-C Transmitter | Height: 4.12 in (105 mm); Width: 1.72 in (44 mm); Depth: 2.36 in (60 mm) | |
HD-RX2-C Receiver | Height: 1.43 in (37 mm); Width: 3.91 in (100 mm); Depth: 4.85 in (124 mm) | |
Weight | ||
HD-TX2-C Transmitter | 5.8 oz (165 g) | |
HD-RX2-C Receiver | 11.6 oz (330 g) |