Описание товара
Подробности
Video/RGB Switcher. Companion to the MP2/MP2E, Cresnet controllable, 3x2 S-Video Matrix Switcher and 4x2 RGBHV Matrix Switcher, accepts optional C2N-MMS-SC scan converter card.
- Integrated video and RGB matrix switcher
- Low-cost expansion for MP2 and MP2E systems
- Optimized performance over conventional coaxial cable
- Built-in input signal sensing
- Optional scan converter
- Compatible with all Crestron 2-Series control systems
- Cresnet communications
- Single-space rack mount installation
Дополнительная информация
| Video | ||
| Switcher | 3+1 x 2 crosspoint matrix; “+1” input accepts signal from optional internal scan converter card (C2N-MMS-SC sold separately) | |
| Signal Types | S-Video (Y/C) or composite (does not transcode) | |
| Formats | NTSC or PAL | |
| Bandwidth | 100MHz (-3dB) at unity gain | |
| Crosstalk | -60dB | |
| RGB | ||
| Switcher | 4 x 2+1 crosspoint matrix; supports RGBHV up to 2048 x 1536 resolution; “+1” output feeds signal to optional internal scan converter card (C2N-MMS-SC sold separately); includes software-configurable peaking and boost per output | |
| Gain | 0dB in unity gain mode; 1.25dB in boost mode (0.7 volt input, 75 ohm termination) | |
| Bandwidth | 400MHz (-3dB) at unity gain | |
| Blanking Time | < 0.1 second | |
| Sync Rise/Fall Time | 3.5 ns maximum | |
| Sync Latency | < 30 ns | |
| Connectors | ||
| VIDEO IN 1 – 3 | (6) BNC female comprising (3) S-Video or composite video inputs; Input Level: 0.3 to 1.5 Vp-p with no DC offset; Input Impedance: 75 ohms; DC Offset: Maximum ±1 Volt DC with minimum input, ±0.5 Volt DC with maximum input; Video signal sensing on Y/COMP | |
| VIDEO OUT 1 – 2 | (4) BNC female comprising (2) S-Video or composite video outputs (same as input source); Output Level: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p composite input); Output Impedance: 75 ohms | |
| RGBHV IN 1 - 4 | (4) DB15HD female, RGB (VGA) inputs; Format: RGBHV; RGB Input Level: 0.3 to 1.5 Vp-p (unity gain with no DC offset); RGB Input Impedance: 75 ohms; RGB DC Offset: Maximum ±1 Volt DC with minimum input, ±0.5 Volt DC with maximum input; Sync Input Level: 2 to 5 Vp-p; Sync Input Impedance: 75, 500, or 1k ohms individually selectable for H and V via internal DIP switch; Sync DC Offset: ±2.5 Volt DC maximum; Video signal sensing on “H-SYNC”; defeatable DDC (simulates PNP monitor connection) | |
| RGBHV OUT 1 - 2 | (2) DB15HD female, RGB (VGA) outputs; Format: RGBHV; RGB Output Level: 0.7 to 0.75 Vp-p (terminated, with 0.7 Vp-p input, unity gain); RGB Output Impedance: 75 ohms; Sync Output Level: 4 to 5 Vp-p; Sync Output Impedance: 33 ohms; Sync Polarity: Follows input; Maximum Cable Length: Tested to 100 feet | |
| NET | (2) 4-pin 3.5mm detachable terminal blocks Cresnet slave ports, paralleled | |
| GROUND | (1) 6-32 screw, chassis ground lug | |
| LED Indicators | ||
| PWR | (green) Indicates 24 Volts DC power supplied from Cresnet control network | |
| NET | (yellow) Indicates communication with Cresnet system | |
| SETUP (rear) | (red) Used for touch-settable ID (TSID) | |
| Buttons | ||
| SETUP (rear) | Used for touch-settable ID (TSID) | |
| Power Requirements | ||
| Cresnet Power Usage | 6 Watts (0.25 Amp @ 24 Volts DC); 12 Watts (0.5 Amp) with C2N-MMS-SC installed | |
| Environmental | ||
| Temperature | 41° to 104°F (5° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Chassis | Steel, black matte powder coat finish | |
| Faceplate | Extruded aluminum, black matte powder coat finish with polycarbonate label overlay | |
| Mounting | Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 1.70 in (4.32 cm) | |
| Width | 17.03 in (43.25 cm); 19.0 in (48.26 cm) with ears | |
| Depth | 7.15 in (18.17 cm) | |
| Weight | ||
| 3.4 lbs (1.5 kg) | ||
