Описание товара
Подробности
Crestron Green Light® sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-ODT-C-2000 is a low-profile ceiling mount occupancy sensor designed for large areas up to 2000 square feet to detect when the room is occupied. Advanced self-adaptive, dual-technology motion sensing affords extreme reliability for control of lighting, climate control and other devices in the room.
Дополнительная информация
| Sensing | ||
| Sensor Technology | Dual-Technology Passive Infrared and Ultrasonic 32 kHz | |
| Auto-Adjustment | Microprocessor-based self-adaptive | |
| Ambient Light Recognition | Built-in photocell for ambient light override | |
| Coverage Area | 2000 sq. ft. | |
| Coverage Pattern | 360 degrees | |
| Major Motion Area | 64 x 32 feet | |
| Minor Motion Area | 45 x 23 feet | |
| Memory | ||
| Built-in non-volatile memory retains all settings in case of power loss | ||
| LED Indicators | ||
| IR | (1) Red LED, indicates infrared motion | |
| Ultrasonic | (1) Green LED, indicates ultrasonic motion | |
| Controls (Behind Cover) | ||
| Ultrasonic Range | (1) Green adjustment knob; Adjusts sensitivity of ultrasonic motion sensor; Adjustment Range: 0% to 100% (50% factory default) | |
| Infrared Range | (1) Red adjustment knob; Adjusts sensitivity of infrared motion sensor; Adjustment Range: 0% to 100% (75% factory default) | |
| Delayed-Off Time | (1) Black adjustment knob; Adjusts delayed-off time duration; Adjustment Range: 30 seconds to 30 minutes (10 minutes factory default, 6 seconds in test mode) | |
| Ambient Light Threshold | (1) Blue adjustment knob; Adjusts threshold for ambient light override; Adjustment Range: 100 to 3000 Lux (3000 Lux factory default) | |
| DIP Switch A | (1) 4-position DIP switch 1: Enables single-technology mode; 2: Selects infrared or ultrasonic when in single-technology mode; 3: Disables auto-adapting; 4. Disables walk-thru mode | |
| DIP Switch B | (1) 4-position DIP switch 1: Forces control signal output high (room lights on); 2: Forces control signal output low (room lights off); 3: Enters or exits Test Mode (toggle “on” then “off”); 4: Disables both LED indicators | |
| Connections | ||
| Power | (1) Red 6” flying lead, 24 AWG; +24 Volt DC power input | |
| Common | (1) Black 6” flying lead, 24 AWG; Power and control signal common | |
| Occupancy | (1) Blue 6” flying lead, 24 AWG; Occupancy sensor control signal output; Provides 24 Volts DC high logic signal when occupancy is detected; Short circuit protected; Connects to a GLS-SIM Integration Module[2], or to a Versiport I/O control port on any Crestron control system | |
| Occupancy w/Photocell | (1) Gray 6” flying lead, 24 AWG; Occupancy sensor control signal output with ambient light override; Provides 24 Volts DC high logic signal when occupancy is detected and ambient light is below set threshold; Short circuit protected; Used instead of the blue “Occupancy” connection when ambient light override is desired | |
| Environmental | ||
| Temperature | 32° to 104°F (0° to 40°C) | |
| Humidity | 0% to 95% RH (non-condensing) | |
| Power Requirements | ||
| Current Consumption | 32 mA @ 24 Volts DC | |
| Cresnet Power Usage | 1 Watt[1] | |
| Housing | ||
| Construction | High-impact injection-molded plastic, white | |
| Mounting | Surface mount directly to drop-tile or drywall, 4” octagon box (1.5” minimum depth), or round fixture box (Wiremold® V5738 or equivalent) | |
| Dimensions | ||
| Height | 1.55 in (3.94 cm) | |
| Diameter | 4.20 in (10.67 cm) | |
| Weight | ||
| 5.0 oz (142 g) | ||