Описание товара
Подробности
- 4 channels of 4-wire 0-10 Volt fluorescent dimming
- Supports 120 to 240 Volt 50/60 Hz
- Also allows switching of lighting and exhaust fans*
- Override input
- Cresnet communications
- Setup via front panel or software
- Programmable functionality via DIN-AP2
- 9M wide DIN rail mounting
Дополнительная информация
Load Ratings | ||
Dimmer Channels | 4 | |
Maximum Per Channel | 5 Amps @ 120 to 240 Volts AC, 50/60 Hz; 600 Watts @ 120 Volts AC; 1150 Watts @ 230 Volts AC; 1200 Watts @ 240 Volts AC, 0.5 HP; 16 Amps Resistive | |
Module Total | 20 Amps @ 120 to 240 Volts AC, 50/60 Hz; 2400 Watts @ 120 Volts AC; 4600 Watts @ 230 Volts AC; 4800 Watts @ 240 Volts AC | |
Dim Load Types | 4-Wire 0-10V Fluorescent Dimming Ballasts (30 maximum) | |
Switch Load Types* | Incandescent, Magnetic Low-voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent, Motors | |
Connections | ||
OUTPUT 1 – 4 | (2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs; Voltage Control Range: 0 to 10 Volts DC; Maximum Sink Current: 60mA per channel; Output Resolution: 1024 levels (10 bit) | |
1 – 4 | (4) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 – 4; Relay Rating: 5 Amps maximum per channel; Maximum Wire Size: 12 AWG (2.5 mm²) | |
NET | (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet slave port | |
OVERRIDE | (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24 Volts | |
Controls & Indicators | ||
1 – 4 | (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel | |
NET ID | (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels | |
SETUP | (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID | |
OVR | (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets | |
PWR | (1) Green LED, illuminates when DC power is applied to the NET port | |
NET | (1) Yellow LED, indicates communication with the control processor | |
RESET | (1) Recessed miniature pushbutton, resets internal processor | |
Enclosure | ||
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm) | ||
Power Requirements | ||
Cresnet Power Usage | 4.2 Watts (0.18 Amps) @ 24 Volts DC | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 17 BTU/hr | |
Dimensions | ||
Height | 3.71 in (9.42 cm) | |
Width | 6.26 in (15.90 cm) | |
Depth | 2.35 in (5.95 cm) | |
Weight | ||
9.2 oz (260 g) |