Описание товара
Подробности
The WAN interface cards -1AM and -2AM (WIC-1AM and WIC-2AM) provide one or two internal V.90 analog modems. These WICs can be used for incoming or outgoing analog modem calls. The WIC-2AM features dual RJ-11 connectors, while the WIC-1AM uses one port for connection to a standard telephone line, and the other port to connect to a basic analog telephone for use when the modem is idle
Дополнительная информация
The WIC-1AM and WIC-2AM interface cards support the following protocols:
- All standard data rates from 300 bps to 33.6 kbps (V.34bis)
- V.42bis and MNP 5 data compression
- V.42, LAPM, and MNP 2 to 4 error correction
- V.90 up to 56 kbps
- MNP 10 for high performance under all line conditions
- MNP 10EC for high performance in analog cellular environments
WIC-1AM-V2 and WIC-2AM-V2 Features
You can upgrade WIC-1AM-V2 and WIC-2AM-V2 WAN interface card modem firmware, if a new image is released. For more information about configuring the WIC-1AM-V2 and WIC-2AM-V2 interface cards, and upgrading the modem firmware, see the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card feature document.
- All standard data rates from 300 bps to 33.6 kbps (V.34bis)
- V.42bis and MNP 5 data compression
- V.42, LAPM, and MNP 2 to 4 error correction
- V.44 for a higher compression ratio over V.42bis compression technology.
- V.90 up to 56 kbps
- V.92 with quick-connect
- MNP 10 for high performance under all line conditions
- MNP 10EC for high performance in analog cellular environments
