| Image | - Up to 6,300 ANSI lumens
- 2,500-10,000:1 FOFO
- 650:1 ANSI
- Electronically adjustable iris (manual or dynamic)
|
| Display technology and resolution | - 3-chip 0.96" DMD
- Native WUXGA 1920 x 1200
- Frame delay: as little as one frame
|
| Input signal compatibility | - Native dual-link DVI-D
- Analog BNC (optional)
- Frame-doubled 3D - dual-link DVI, VGA (HDMI, analog BNC & SDI optional)
|
| Inputs, control & networking | - RS232 in/out
- RS422 in
- Ethernet (10/100)
- USB device
- GPIO (RS232 9-pin male connector)
- Built-in backlit LCD keypad
- Remote control (with optional wired XLR connection)
- Slot 1-2 standard (populated): dual-link DVI-D (330MHz) and VGA (165MHz)
- Slots 3-4 are available for option cards
|
| Optional input modules | - Full bandwidth analog BNC
- Dual-link DVI input card (330MHz), \- VGA (165MHz)
- Dual SD/HD-SDI
- Video decoder
- Twin HDMI
|
| Advanced feature set | - Embedded Christie Twist™ - internal advanced warping and edge-blending
- LiteLOC™
- Electronically adjusted iris (manual or dynamic)
- Dust-sealed, filter-free design
- Reduced power requirements (as compared to competitive products on the market today) – at maximum brightness the unit only draws 870W; standby power consumption (phantom power draw) is less than 20W
- Reduced noise levels
- LCD keypad – active keys are amber to indicate whether function selected will be seen by the audience
- Motorised yellow notch filter
- Built-in portrait display capabilities*
*Christie M Series stacking frame is required in portrait orientation. |
| Lens mount | - Motorised horizontal and vertical lens offset
- Scheimpflug (tilt) adjustment
- Built-in light shutter
- Tool-free lens insertion system
- All lenses are optional
|
| Lamp | - Dual Osram PvIP 200W lamps
- Lamp life: 2000 hours @ 200W , 3000 hours @ 150W
|
| Light output control (LITELOC™) | - Provides constant brightness tracking and monitors lamp output. It also automatically adjusts the power to ensure constant, uniform brightness across the image – on a multiple-projector screen or multiple-screen display.
|
| Power requirements | - 100V AC to 240V AC @ 50/60 Hz
- Power consumption: 870W maximum
- Thermal dissipation: 2971BTU/hr
- Operating current: 9A @ 100V
|
| Dimensions (excluding lens) | - Weight: 55lb (25kg) without lens
- Shipping weight: 87 lb (38 kg)
- Size: 19.7" W x 22.1" L x 10.2" H (500mm W x 561mm L x 259mm H)
|
| Standard accessories | - User manual
- IR remote
- Line cord
- Two dual-link DVI-D cards
- 3D sync cable
|
| Optional accessories | - Coarse dust filter
- ILS lens adapter kit
- Stacking frame
- Dual HD/SDI input card
- Twin HDMI input card
- Dual-link DVI input card
- Video decoder input card*
*may not include 3D support |
| Operating environment | - Operating temperature: 40-104°F (5-40°C)
- Humidity (non-condensing): 20-80% non-condensing
|
| Regulatory approvals | - UL/CSA/IEC 60950 (3rd edition)
- FCC Class A, CE, CCC
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, WEEE
|
| Warranty | - 3 years parts and labour (including light engine)
|
