Описание товара
Подробности
Точка доступа стандарта 802.11n для помещений, обеспечивает высокую производительность даже в условиях плохой радиообстановки, при этом гарантируя высокую степень защиты благодаря встроенному алгоритму Aruba MACSec. Обеспечивают агрегатную скорость до 450Мбит/c (по радио), используя преимущества технологии 802.11n точки доступа AP-134 и AP-135 используют 3 потока передачи данных, обеспечивая до 50% большую пропускную способность и обслуживая до 50% больше абонентов. Поставляется со встроенными антеннами. Имеют по два Ethernet интерфейса (10/100/1000BASE-T) и поддерживают стандарт IEEE 802.3af (PoE), а также может питаться с использованием внешнего адаптера.
- стандарт Wi-Fi: 802.11n
- макс. скорость: 450 Мбит/с
- коммутатор 2xLAN
- скорость портов 1000 Мбит/сек
Дополнительная информация
Advanced Features
- Spectrum Analysis:
- Spectrum analyzer remotely scans the 2.4-GHz and 5-GHzradio bands to identify sources of RF interference. - Security:
- With an OpenDNS service subscription, Aruba Instant delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN
- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
- SecureJack-capable for secure tunneling of wired Ethernet traffic
OPERATING MODES
- 802.11a/b/g/n Aruba Instant AP
- 802.11a/b/g/n Mobility Controller-managed AP
- Air monitor (AM)
- Secure enterprise mesh
- Remote AP (RAP) when used with a Mobility Controller
Wireless Radio Specifications
- AP type: Dual-radio, dual-band 802.11n indoor
- Software-configurable dual radio supports 2.4 GHz and 5 GHz
- 3x3 MIMO 802.11n with three spatial streams and up to 450 Mbps per radio
- Supported frequency bands (country-specific restrictions apply):
-- 2.400 to 2.4835 GHz
-- 5.150 to 5.250 GHz
-- 5.250 to 5.350 GHz
-- 5.470 to 5.725 GHz
-- 5.725 to 5.850 GHz - Available channels: Dependent upon configured regulatory domain
- Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
- Supported radio technologies:
-- 802.11b: Direct-sequence spread-spectrum (DSSS)
-- 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
-- 802.11n: 3x3 MIMO with three spatial streams - Supported modulation types:
-- 802.11b: BPSK, QPSK, CCK
-- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM - Transmit power: Configurable in increments of 0.5 dBm
- Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
-- 2.4-GHz band: +23 dBm (18 dBm per chain)
-- 5-GHz bands: +23 dBm (18 dBm per chain) - Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay diversity for improved downlink RF performance
- Short guard interval for 20-MHz and 40-MHz channels
- Space-Time Block Coding (STBC) for increased range and improved reception
- Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
- Transmit beam-forming (TxBF) for increased reliability in signal delivery (Supported in hardware; currently not enabled in software)
- Association rates (Mbps):
-- 802.11b: 1, 2, 5.5, 11
-- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
-- 802.11n: MCS0 to MCS23 (6.5 Mbps to 450 Mbps) - 802.11n high-throughput (HT) support: HT 20/40
- 802.11n packet aggregation: A-MPDU, A-MSDU Power
- 48 volts DC 802.3af power over Ethernet (PoE) or 802.3at PoE+
-- Note: when using 802.3af POE, the second Ethernet port is disabled. It is enabled when using an 802.3at POE power source (or direct DC power). - 12 volts DC external AC supplied power (adapter sold separately)
- Maximum power consumption: 12.5 watts
ANTENNAS
- AP-135 and IAP-135: Six integrated downtilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz
Interfaces
- Network: Two 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
- Ethernet ports support 802.3az Energy Efficient Ethernet (EEE)
- 48 volts DC 802.3af PoE or 802.3at PoE+ interoperable with intellisource power sourcing equipment (both ports)
- Other: One RJ-45 console interface
Mounting
- Included with AP:
-- Mounting brackets for attaching to 9/16” and 15/16” T-bar drop-tile ceiling
-- Kensington security lock point - Optional mounting kits:
-- AP-130-MNT: Aruba 130 series AP mount kit contains one flat-surface wall/ceiling mount bracket.
-- AP-130-MNT-C2: Aruba 130 series AP mount kit contains two ceiling-grid rail adapters for interlude and silhouette style rails.
-- AP-130-MNT-W2: Aruba 130 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle.
Mechanical
- Dimensions/weight (unit):
-- 170 mm x 170 mm x 45 mm (6.69” x 6.69” x 1.77”)
-- 760 g (1.68 lb) - Dimensions/weight (shipping):
-- 285 mm x 240 mm x 70 mm (11.22” x 9.45” x 2.76”)
-- 1,050 g (2.31 lb)
Environmental
- Operating:
-- Temperature: 0° C to +50° C (+32° F to +122° F)
-- Humidity: 5% to 95% non-condensing - Storage and transportation temperature range:
-- Temperature: -40° C to +70° C (-40° F to +158° F)
Regulatory
- FCC/Industry of Canada
- CE Marked
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 300 328
- EN 301 489
- EN 301 893
- UL/IEC/EN 60950
- EN 60601-1-1, EN60601-1-2
Certifications
- CB Scheme Safety, cTUVus
- UL2043 plenum rating
- Wi-Fi certified 802.11a/b/g/n
Warranty
- Limited lifetime warranty
Minimum ArubaOS Version
- ArubaOS 6.1.1.0 on an Aruba Mobility Controller
- Aruba Instant 2.0.0.3 software
