Описание товара
Подробности
Дополнительная информация
SPECIFICATIONS
Mounts into standard decor style wallplates (not included)
- Enova DGX 8/16/32/64 Digital Media Switchers
- Enova DVX-3155HD, DVX-3156HD and 2155HD All-In-One Presentation Switchers
- AVB-RX-DXLINK-HDMI DXLink HDMI Receiver Module as a point-to-point solution (when Wallplates are powered by PS-POE-AT-TC or PDXL-2)
- PS-POE-AT-TC High Power PoE Injector
- PDXL-2 Power over DXLink Controller
- CC-USB, USB Programming Cable (FG10-5965)
CE EN 55022
CE EN 55024
CE EN 60950-1
IEC 60950-1
UL 60950-1
cUL
RoHS
WEEE
Shielded Cat6, Cat6A and Cat7
DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
For more details and helpful cabling information, reference the white paper titledCabling for Success with DXLink, or contact your AMX representative
Power must be supplied by a DXLink Power sourcing device such as:
- Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
- Compatible Enova DVX All-In-One Presentation Switcher (3155HD, 3156HD or 2155HD)
- PS-POE-AT-TC High Power PoE Injector
- PDXL-2 Power over DXLink Controller
When installed in conjunction with an Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of the configuration
AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC or PDXL-2 as a power source the wallplates require firmware v1.2.40 or above
Power must be supplied by a DXLink Power sourcing device such as:
- Enova DGX 8/16/32/64 Digital Media Switcher (with a DXLink Twisted Pair Input Board installed)
- Compatible Enova DVX All-In-One Presentation Switcher (DVX-3155HD, DVX-3156HD or DVX-2155HD)
- PS-POE-AT-TC High Power PoE Injector
- PDXL-2 Power over DXLink Controller
AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. To use PS-POE-AT-TC or PDXL-2 as a power source the wallplates require firmware v1.2.40 or above
User Accessible (accessible with faceplate mounted)
Setup Front Connectors (not accessible with faceplate mounted)
Places system in NetLinx Device ID assignment mode
Reset the factory default settings
Restore the factory firmware image
Use in conjunction with an Enova DGX Digital Media Switcher, connect a DXLink TX (twisted pair or fiber) to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver (twisted pair or fiber)
For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document “DXLink HID Keyboard and Mouse Supported Devices”.
DVI-D (Single Link With Cable Adapter)
DisplayPort ++ (Input Only, With HDMI Cable Adapter)
6.75 Gbps supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
225 MHz supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
30-bit, 36-bit supported when the DXLink HDMI RX Scaler is in Bypass mode and format is 1080p60 or less
YCbCr 4:4:4 and 4:2:2
(Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)
Frame Packing 1080p up to 24Hz
Frame Packing 720p up to 50/60Hz
Frame Packing 1080i up to 50/60Hz
Top-Bottom 1080p up to 24Hz
Top-Bottom 720p up to 50/60Hz
Side-by-Side Half 1080p up to 50/60Hz
When used as a single point to point solution the key support is defined by the source device
When used with Enova DGX 8/16/32/64 Digital Media Switcher or Enova DVX-3155HD, DVX-3156HD or DVX-2155HD the HDMI EDID is passed from the Enova Switcher input to the TX and is user reprogrammable. The analog video input connection provides a fixed EDID set
YPbPr (HDTV)
Y/c (S-Video), C (Composite)
If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered
Video signal must be present to pass Audio
Dolby Digital and DTS support up to 48kHz, 5.1 channels
RCA Jack (S/PDIF)